Posted by Trevis on March 03, 2013 at 19:16:53 from (74.3.146.57):
Wondering if anyone can Help? I have a 1981 White 2-85 with 8500 hours. The Hydraulic pump quit working, just prior to this happening, the pump started making a noise as if it was starving for oil. I installed a new (re-built) hyraulic pump, but the noise coming from this new pump is the same as before (like it is starving for oil and chattering). I've replaced the oil filter and used fresh oil, I'm using a 22 weight hydrauilic oil since it is wintertime. There is a butterfly valve on the oil filter head that is used for bleeding out the air. When I crack this valve open the noise stops but I have no hydraulics at all. When I tighten this valve the starving noise starts and I have minimal hydraulics. Also, when I pull the dipstick to check the oil, the oil is foamy/bubbly like it is getting injected with air. I have been told by my local dealer that there is no lift/charge pump in this model of tractor. Also I've been told there is no other oil filters to change. This model has a seperate oil resevoir that holds 32 litres (7 gallons) of oil. Can anyone explain what I should try next?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Fordson F Ignition System - by Anthony West. A fellow restorer contacted me earlier this year asking for some help and advice on a model F that he was restoring. He had over a period of months spent a fair amount of his hard earned cash on replacement parts for the old "trembler" ignition. Sadly though all his efforts seemed to be a waste of time and money as he still couldn''t get the temperamental old thing to run correctly!! If i said that this was a little frustrating for him that would be "conservative" in fact the problem had reduce
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
