Posted by Stick welding on March 01, 2013 at 21:40:49 from (96.53.210.246):
In Reply to: Re: 3 point tiller posted by pete black on March 01, 2013 at 20:58:50:
Most tillers rotate forward but there some models with counter rotating tines. If you're just doing a garden that is tilled every year, it won't matter what kind you use and it will require less HP than tilling fresh ground or sod. I bought a Sicma tiller, made in Italy. They make or at least used to make a bunch of the JD and/or Frontier tillers. One thing you want is either a shear bolt or preferably a slip clutch to protect the gearbox and the tractor. Always have the tiller lifted out of the ground when engaging or disengaging the PTO. I have heard of PTO shafts breaking from leaving the tiller in the ground.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.