Best thing to do is to calibrate the boom, with a given set of nozzles.
Step 1. Fill tank all the way up with water. 2. drive in the gear you likely will be using in the field, for a set # of minutes, or a set distance. If it's a Hydro tractor, you will need a speed indicator, like a cal-can acre calculator. 3. Re fill the tank, measuring the amount it takes to fill back up. 4. Measure the distance travelled, and the width of the effective spray pattern.
To make the math easy, let's say you travelled 100 feet, your width was 10 feet, and you used 10 gallons.
You sprayed 10,000 square feet, at a rate of 1 gallon, per thousand square feet.
Doing the math, you sprayed .2295 Acre, at a rate of 43.56 gallons per Acre, if I did the math right.
By setting it up this way, you get rid of the theory, of what the nozzle package, pump package, and pressure loss theories SAY, and end up with what you actually did. It is a small step, then to change one variable (IE, speed or nozzle size), and dial in the amount of spray that the directions on the label of the pesticide, tells you to use.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Piston Ring Removal and Replacement - by Chris Pratt. Piston Ring Removal and Replacement - Replacing rings is a fairly easy process to stretch the engines usability between major rebuilds and cut down on that blue smoke and high oil consumption. Frequently, replacing only the rings is not advisable because by the time you do the teardown and measurement of the components, the pistons are often beyond the manufacturers specification or something else you find will signify the need for a major rebu
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
