A 14" tree is pretty darn small. I totally agree with D7fever, HIRE A FORESTER! If you do it right you can probably cut every 15-20 years. The real problem with skidders is if not done carefully they can damage as much as they cut, and that's your future harvest. The big advantage of using horses to skid logs is they do much less damage to surrounding timber, which is to your advantage in the future. Plus they are a thing of beauty to watch work. As far as roads go I've never seen any kind of improvement done by a logger, and never seen any damage to lanes, etc. repaired properly. Just a whack or two with the small blade on a skidder. If I seem predjudiced, it's because I am. I've seen woods harvested properly, with very little damage to the remaining timber, and I've seen others that won't be able to be harvested again for 40 years. If you look at every logger as a criminal and plan accordingly you should do OK. But be sure to cover the bases, get the best advice you can. I don't want to offend anyone, but the chances of the same logger coming back to harvest again are nil, so for them it's a one time deal. Timber is like any other crop, but the harvest cycle is a lot longer so you need to make sure you do it right. Just my rant!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
