Re: pilot bushing - need help BAD

Posted by Determined on January 18, 2013 at 07:55:45 from (216.130.212.139):

In Reply to: pilot bushing - need help BAD posted by blackwidow on January 17, 2013 at 11:55:27:

If you have not taken the truck apart yet.

-Start up the engine

-Push in and hold down the clutch pedal

-Try moving the shifter through all the gears

-If it actually has two bushings there will be preload on the transmission input shaft, this will prevent the smooth shifting of the gears as the input shaft will still be turning driven by the bind against the extra bushing.

-If it shifts smoothly through all the gears without any grinding then you have to assume that even if there are two bushings in there they have been pushed far enough into the crankshaft to not be of concern.

Dave

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]