Posted by buckeyebrierhopper1 on January 03, 2013 at 13:18:52 from (65.27.225.98):
In Reply to: Soldering a fuel tank posted by Fritz Maurer on January 03, 2013 at 06:38:44:
in soldering a fuel tank an a torch is not a good thing. i use a soldering iron,nodicks soldering paste an 50/50solder.flame could light fumes in tank. you can find irons at yard sales.flea markets or borrow one,much safer.done one for brian in oh acouple yrs ago an still holding as of last show. biggest thing is clean, clean,clean, use a brush to put paste on an tin it. one thing i found is some ribbon copper found at hobby store for filler. with iron you can control temp alot better an safer. you can heat iron with propane torch an can keep heat even.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Reflections of the Fifties - by "Country" Elliott. I remember rowing up in the 1950�s in a small, rural town in northwestern New Jersey. The closest town to ours was only 3 miles away, and there were seven dairy farms in the areas of these two country towns. We had 5 acres, and because my Dad was a salesman and not a dairy farmer, he let the Bockovens, who owned the Willow Tree Dairy farm most of our land.
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
