Posted by KEH on December 09, 2012 at 05:03:58 from (209.213.19.196):
In Reply to: reloading ammo ? posted by mosinee dave on December 08, 2012 at 18:56:55:
You can also cast your own bullets. This works especially well for pistol bullets. Generally, cast pistol bullets are as accurate as jacketed bullets. Getting into casting is not cheap, You can look at Powder Valley, Midway, Cabelas to get an idea of prices. Once the equipment is bought, the expense is slight. Lead can be scrounged usually. Sources? Fired bullets from a fireing range, damaged wheel weights from a tire store(not free), or wheel weights from the sides of roads. There are a surprising number of wheel weights lost. Don't use old car batteries, they contain arsenic, I'm told, but anyway the trouble of breaking down batteries is not worth it.
You can also buy cast or swaged bullets commercially, maybe a nickle each, again, look at power valley. You can use cast bullets in rifles but at reduced velocities since friction from the air starts to melt lead bullets and make them inaccurate at about 2000 fet per second.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.