"Pastures" as such, usually don't require much fertilizer as up to 90% of P&K nutrients are returned back to the soil via the manure. There have been many studies done on pasture nitrogen fertilization spring vs fall. "Usually", fall application is best as you get better absorption and utilization over a longer period. NOrmally the "spring flush" overproduces and can't be effectively utilized. Fall application spreads out the usage period. Dave, probably the most important aspect for you would be PH adjustments if needed. I assume you rent many of your small pastures so the landowner "should" withstand part of this cost as it is a long term soil amendment. Low ph soils just do not respond to nitrogen fertilizer effectively. Convincing the land owners to do this will require some of your best "people skills". You might consider combining 2 or 3 small plots into one soil test sample if cost is a consideration. Unless you find some extremely low ph values, I'm thinking that 40 units of nitrogen fall applied will accomplish what you want. Keep us posted on what your soil tests find.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Buying your first tractor: The People You Buy From - by Chris Pratt. If you are a first-time buyer, chances are that you are likely to take the word of the seller on things. This is where the problems start... You have reviewed your implement needs and determined the size of machine that will fit the bill and even made a list of the most desirable models. You checked on the availability of a 3-point hitch for the machines on the list and advertised in your local classified paper with so
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
