You have hit my area of expertise as I design concrete structures for a living.
I would not suggest the expansion type anchors commonly referred to as red-heads. Everything has to be perfect to ensure a tight fit to uphold the maximum tensions that the chart suggest and have seen many of them pull out or work loose over time. Unless you really know what you are doing, I suggest you use a 2 part epoxy system. You can purchase a stick of standard threaded rod for your application. Follow the epoxy hole size and depth requirements and most importantly blow the hole clean of any dust. You will only need 4 anchors, but you might want to install a few more for peace of mind and to distribute any forces all along the sill plate instead of isolating it.
We purchase all our epoxy systems from Fastenal. They have better tension results over something from a local hardware store.
This post was edited by johndeerefan at 08:27:43 10/11/12 2 times.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.