What happened to me wasn't MX related but it did involve a motorcycle. As I learned the hard way, let this be a lesson to others. I was riding a back country road at night, when an idiot driver starts backing out of a driveway and obviously didn't look both ways before backing out in front of me. I took to the far right side of the road trying to avoid a collision. I went into a shallow ditch and was trying to get the bike back onto the road when I hit a culvert. I flew over the handlebars and T-boned a security light pole backwards severing my spinal column. I've been in a wheelchair since 1976. The other driver saw what happened and just went on their merry way, leaving me laying in a field. My son has wanted a m/c for years but his Mom has put her foot down every time he mentions it. M/X is fun, as is just tooling around with the wind in your hair BUT you gotta watch the idiots out there that don't deserve a drivers license. Have fun riding but don't drop your guard for 1 second, there's idiots out there that will kill you or make you wish you were dead.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.