Re: No spark from good 12v coil

Posted by Walt Davies on September 12, 2012 at 18:05:16 from (174.253.208.210):

In Reply to: No spark from good 12v coil posted by 550Doug on September 12, 2012 at 16:34:42:

Simple take a test light or multimeter check for voltage at the battery side of coil. If non check switch. If voltage then open distributor remove coil wire from center of cap hold it near ground. Now open and close points with a screwdriver that has a good plastic handle. If they are closed then short across then if closed the just push them open and closed a few times. You should get spark from center wire from coil if not check coil.
Since you have already changed the coil I would look for voltage going in and the do other test. If spark when points are shorted coil is goo and you have voltage. Then replace points and condenser they are most likely your problem.
Walt

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]