Bobcat

Posted by Keith-OR on August 26, 2012 at 19:56:40 from (208.65.217.6):

All you guys and gals that might have a Bobcat (610)
that has a Wisconsin VH4D engine, I need a measurement!! I need the distance from the engine block to the inside vari-speed pulley.. I think it is some where around 1/2 inch.. I made a big mistake, had my pulley machined out to fit a straight shaft, but for got to get this measurement before hand..hhhhhhhmmm

And no the manual does not contain this info !!!!!

Thanks
Keith & Shawn(Gold medal winner, 445lb DL)

Replies:

• Re: Bobcat dannye 16:00:24 08/27/12 (0)
• dannye, bearings Keith-OR 09:20:58 08/27/12 (0)
• Re: Bobcat dannye 20:04:38 08/26/12 (3)
  • Re: Bobcat Keith-OR 20:34:41 08/26/12 (2)
    • Re: Bobcat dannye 06:07:19 08/27/12 (1)
      • Bobcat bearings Keith-OR 08:58:53 08/27/12 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]