Thanks to all on the advice. I have replaced all the teeth on my rake, a 5-bar JD very similar or identical to James Howell"s. I will check that it is adjusted to lift the hay as much as possible. I will focus on making the rake work, as I"ve put a lot of money into bearings and teeth!
I think you guys are right on the money about inconsistent moisture levels when I rake it. I may borrow a neighbors tedder and experiment on a small piece with tedding after a day. Even when dry, the leaves really resist being pulled off the stem, so I think it is resistant to shattering. When I go to rake, the top of the field is crispy brown with varying moisture levels as you go down in the cut hay. The conditioner has made a huge difference in drying. It may need to sit in windrows for a little longer, so the stuff raked to the top has a chance to dry.
Thanks again for all your help, I will heed your advice.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: What's The "Stuckest" You've Ever Been? - by Edited by Kim Pratt. Another great discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I was about 14 (part of the problem) when I got stuck. I was disking with a cab equipped IH 966. The window was dirty and I was driving into the evening sun. It was hard to see and it was my first pass down the field. I got the tractor so stuck that the underside of the tractor was resting on the ground. My uncle wanted
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
