Posted by Aaron Ford on July 01, 2012 at 16:51:04 from (76.92.68.163):
Okay so I posted here a week ago about a drive belt for a Yazoo S22CB4 and got a lesson. I appreciate it and after spending many dollars on the wrong style belt I am here with my hat in my hands.
Alright fellas, the factory belt was marked HUSQVARNA TURF CARE DIV 0205-011 and 0502-180. Before I drop any more money on this project, where could I find the right belt? I have no local lawnmower shops other than the big box stores. The worn belt is 20 inches long and approx 3/8 wide. I suspect the 502 is length in millimeters but the 180 has me stumped. The drive system on this mower has a split drive/driven pulley and the clutch strokes an idler which tensions the belt transmitting power from the drive side of the pulley to the driven. Weird setup but I suspect with the correct belt it would work fine. Anyone got any idea what belt I am looking for?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tuning-Up Your Tractor: Secondary Ignition Wires and Distributor - by Curtis Von Fange. In our last episode we spent the entire day checking out the spark plugs. Is that efficency? Actually, it took more time to explain than it really did to do the inspection. At any rate we decided that a compression test was in order so we could verify the internal engine status. That way we wouldn't buy any tune up parts until we were sure that the engine was in reasonable mechanical condition. Our tests showed a fictional compression reading of 85, 80, 82 and 86 psi. That is well within a
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
