Posted by NCWayne on June 10, 2012 at 20:38:05 from (69.40.232.132):
In Reply to: hardening paint posted by Aaron in IL on June 10, 2012 at 20:13:52:
THaving spent a good bit of time around a biddues body shop, I can tell you tere are so many types of paints out there nowdays it's impossible to give a real answer to your problem. That said I've seen paint where the hardner wasn't mixed in, where the wrong hardner was used, where the right hardner was used but it was 'out of date', etc, etc. In each case the paint never got hard like it was supposed to. In the instance of the 'old' hardener, the paint actually glazed over but stayed soft enough underneath the glaze that the first drive down the road, at night, filled an otherwise beatutiful paint job full of every flying critter imaginable. Looked like a really big, pretty fly trap.........
Beyond that, your guess as to what happened will be as good as anyone elses without knowing every component used, how it was mixed, the product used under it, etc, etc, etc, etc, and how all of it should have worked to turn out a good paint job that obviously got off track somewhere and didn't do as it should.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Belt Pulley? Really Doing Something? - by Chris Pratt. Belt Pulleys! Most of us conjure up a picture of a massive thresher with a wide belt lazily arching to a tractor 35 feet away throwing a cloud of dust, straw and grain, and while nostalgic, not too practical a method of using our tractors. While this may have been the bread and butter of the belt work in the past (since this is what made the money on many farms), the smaller tasks may have been and still can be its real claim to fame. The thresher would bring in the harvest (and income) once a y
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
