Re: Setting Timing on Case 770

Posted by RGMartin on May 30, 2012 at 11:38:23 from (173.189.142.201):

In Reply to: Setting Timing on Case 770 posted by Andy99 on May 30, 2012 at 10:51:31:

Assuming it is a Case 770 Diesel, not a Case/DB 770.

Left/right side skirt off

Oil fill cap off just in front of the injector pump. match the two marks visible through the hole, one on the pump body, one on the gear.

By the book, timing should be 30 deg btdc using the arrow on the front of the timing cover. Mine is a pig to start unless I set it to 27 BTDC(kicks back on starter real bad).

The timing scale on the front pulley goes from 15 deg ATDC, to 35 deg BTDC.

This post was edited by RGMartin at 11:39:25 05/30/12 2 times.

Replies:

• Re: Setting Timing on Case 770 Adirondack case guy 11:43:24 05/30/12 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]