I would recommend a hose meeting SAE 100R2AT specifications. This is a good 2-wire hose with a sturdy cover that is ideal for tractors and other mobile hydraulic applications.
SAE 100R2AT specifications 1/4" ID --> 5,000 PSI max. working pressure 3/8" ID --> 4,000 PSI max. working pressure 1/2" ID --> 3,500 PSI max. working pressure 3/4" ID --> 2,250 PSI max. working pressure 1" ID --> 2,000 PSI max. working pressure
You could also use SAE 100R16 (same pressure as 100R2AT) or SAE 100R17 (3,000 PSI all sizes), but both have a thinner cover and typically cost more than SAE 100R2AT.
As another benefit, you can often find field-attachable (non-crimp) fittings for SAE 100R2AT, but you're less likely to find those available for the other hoses.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Harvestin Hay: The Early Years (Part 2) - by Pat Browning. The summer of 1950 was the start of a new era in farming for our family. I was thirteen, and Kathy (my oldest sister) was seven. At this age, I believed tractor farming was the only way, hot stuff -- and given a chance I probably would have used the tractor, Dad's first, a 1936 Model "A" John Deere, to go bring in the cows! And I think Dad was ready for some automation too. And so it was that we acquired a good, used J. I. Case, wire tie hay baler. In addition to a person to drive th
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
