I found some so called and labeled 8 volt volatge regulators, but they were for Model T's I believe. As far as tractors in the 40's and 50's I have only seen 6 or 12 but hey I never really searched for an 8 volt.
HERES THE DEAL A genny dont necessarily know what its voltage is supposed to be, it increased EITHER by turning it faster ORRRRRRR pumping more current through its field windings which increases the magnetic field strength.
I have sucessfully used a 6 volt genny to charge a 12 volt battery simply by changing to a 12 volt VR. NOW Before anyone has a calf (some here tend that way lol) Im NOT saying its engineering correct or perfect or that it charged at a real high rate, Im ONLY saying it worked and never caused a problem.............
NEXT field current control relays inside a VR operate and are regulated by things such as spring tension and/or air gap distance sooooooooooo those can be adjusted to achieve more output. An old fashion genny repair shop has the tools and knowledge and can "tweak" up a VR if needed.
Im NOT a fan of the freak oddball 8 volt system (considered by "some" (NOT all) as sort of a "band aid" fix) although some used it to improve cold weather cranking (which it can) and thats fine with me its their money and their choice... If I was going to convert Id go ahead and use the standard and parts available regular 12 volt system then the oddball 8 volt system.
Yours is a GREAT question, no problem how does one learn if they dont ask, hope my post helps you.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
