Posted by Weldon K on May 17, 2012 at 18:25:47 from (173.189.220.242):
In Reply to: IH 85 Grinder Mixer posted by Nate V. IA on May 17, 2012 at 08:02:30:
I have a 105 mixer but it never had the decal. I have a brochure about the 950 and 1150 grinder-mixers. The 950 is 95 bu. and 1150 has capacity of 105 bu. same as 105 mixer. So.... If the 1150 and 105 mixers are the same tank , and the 950 is the same tank diameter as 1150 and 105 ( just shorter ) then one could assume that the 85 model is same diameter as 105 and 1150 also , (just shorter like the 950 model). Then.... the chart would show the same capacities for each respective number regardless of which machine it is on. Your 85 goes to only 6 marks beside the windows, right? Here is a picture of the chart from the 1150 brochure.This chart reads as follows left to right: Ground Oats--Ground Barley--Ground Milo--Ground Shelled Corn--Ground Ear Corn--Unground Shelled Corn Weights for Ground Shelled Corn are: 1. 1678 2. 2061 3. 2444 4. 2921 5. 3304 6. 3687
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Your Tractor - by Staff. Maybe you bought it from a friend who didn't know what kind of tractor it was, or perhaps (and this is every tractor fanatics dream) you stumbled across it in an abandoned field covered with weeds but intact. In any case, you have no idea what the make and/or model is. For awhile perhaps it doesn't really matter. Especially if it runs! But pretty soon you'll probably need to tinker with it a bit and maybe buy a part or too. Having a manual is nice. But how does one go about dete
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
