You moved out of Hobbieville and things went downhill ever since lol.....
1) When jumped bat to field while running discharge rate went to 20.
Youre supposed to DEAD GROUND THE FIELD NOT HOOK TO BAT for the full field test... (hope you didnt fry anything)
2) Regulator looks rather new. If regulator is neg ground only would this cause the problem??
I dont think so, they usually can still work at reverse polarity, its just that the contacts may burn prematurely.
3) Was it polarized wrong when I bought the tractor?? How can I fix it??
Sounds like the genny may have been at the incorrect polarity to match the battery ground, in which case the VR may or may not be bad after all that??????
Im getting mixed signals on ammeter wiring so lets start from scratch, heres what Id do.
4) Insure ammeter wiring. Theres but ONE wire to the SUPPLY side, thats the one that connects to the ungrounded battery post often via a wire to the start switch/solenoid where the big battery cable attaches. The other LOAD side wires to BAT on the VR PLUS feeds power to the light switch. As you already know if the ammeter is correct if you turn on lights when shes setting not running it should swing over to - discharge.
5) Install battery,,,,,,,POLARIZE genny by momentarily flash jumping BAT over to GEN/ARM on the VR,,,,,,,,
Start her up n see if she charges (battery voltage should rise at fast RPM)
If not take 2 aspirins n call me Monday at the office AND RUN MY TROUBLESHOOTING PROCEDURE BELOW especially the dead ground the Field test to see if she charges then......
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - What Price Enthusiasm? - by Anthony West. Quite frankly, for some time now restorers like myself have become more and more concerned about the rapid increase in the prices of old farm machines here in England. There is now a growing market for "As found" machines. Which as machines get rarer, has found the birth of a new industry....one of the "procurement agent". These agents appropriate as much old machinery as possible then inflate prices at auctions. So at what price enthiusiasm? We are now seeing poor machines which 3 years ago ma
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
