Posted by Fixerupper on May 12, 2012 at 15:04:47 from (100.42.82.164):
I did some fuel record keeping this spring with a Deere 4650 power shift and a IH 1086. I don't know if these figures I came up with are in the ballpark of what fuel consumption should be and I only checked it ONCE for each tractor with the implement it was pulling so the figures are far from scientific. I'm not starting a color war, just throwing out some figures. So here goes
1. 4650 on 1000 gallon sprayer 60' boom spraying 28% nitrogen 40 acres per fill-- 1/8 gal/acre
2. 1086 same sprayer spraying Treflan w/water 75 acres per fill-------------------1/10 gal/ acre
3. 1086 on 12 row Deere 7200 planter w/o fertilizer at 5.5 MPH -----------1/4 gal/acre
4. 4650 on 30' field cultivator 10th gear 6ish MPH pulling hard-----------------1/2 gal/acre
When I sprayed I had to come home to refill but it was no farther than 2 miles. Tractor ran while filling to agitate so the Deere came home to fill darned near twice as many times. I don't know how much that affected the fuel consumption.
So there it is. Like I said this is a ONE TIME ONLY check. I did it per acre instead of per hour because per hour means nothing to me. Let the bragging begin!!! Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
