Posted by bob57 on May 12, 2012 at 09:31:18 from (216.176.162.183):
We are restoring this tractor and have done a complete rebuild on the engine and components.The last owner and a helper treated it pretty badly and threw some things together.After installing the engine, we found that the engine would only bump around with the starter after rolling freely on the engine stand.We looked in the tranny case and the gears are fine; same with shuttle box.Changed fluid in both.It sat for some time in the weather, so now I am suspecting trouble in the hydraulic pump box.Will check it today.Clutch does not release, and after thinking long and hard, I remember that there was no sleeve in the release bearing which makes sense to me since the extra length would make the clutch work.This unit does not have the splined shaft for the hyd. pump,as the bearing rides on a fixed hub.Hydraulic is furnished by the big pump mounted on the front which drives off the crank for the hoe and loader.Case has the bearing for $125, but they don't know if it has the sleeve with it.The specs they gave are:1 7/16 i.d. 3" o.d. and 1 1/4 long.Part # G10610. Does anyone know what the number is for the sleeve? And who has it? Thanks, Bob
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Revival of a John Deere Combine - by The Red, John Fritz. For several years I had been driving by a farm house on the west side of Indianapolis that had a John Deere combine parked in high weeds in a lot behind the house. The gentleman no longer farmed because the entire area was developed with housing and light industry. I had stopped several times and knocked on the door but no one would answer. My curiosity was up and I wanted to contact the owner. I wanted to see what he planned to do with the combine.
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
