I think that Wheelabrator was involved in the Spokane Area Waste to Energy project 20 to 25 years ago. My understanding was they planned to build a business park around the incinerator complex that could get very low cost heat from the burning garbage. The system also was supposed to generate a bunch of low cost electricity and inexpensively get rid of the area garbage.
Every few years the local newspaper does a series on how poorly the scheme actually worked. I have never read about cheap heat for a business park or vast greenhouses. They also don"t say much about how much electricity is generated and actually sold to utilities. And our "tipping fees" are sky high at the garbage transfer stations, which is the only LEGAL way to get rid of most garbage. I don"t know if they do any recycling of components of the garbage at the facility, but I have read that the ash that comes from what they burn is considered hazardous waste, which is hauled to a special landfill in another state, maybe Oregon.
It sure sounds like Wheelabrator and/or Waste Management sold our area a real bill of goods, which we will continue to have to pay for, probably until the plant wears out.
Wheelabrator is not a good topic in the Spokane area!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.