Posted by Don-Wi on March 23, 2012 at 18:48:06 from (75.249.123.115):
In Reply to: wood pellets posted by Don-Wi on March 23, 2012 at 12:17:55:
You mentioned indeck as one brand. That was what I got from TSC 2 years ago, and I don't know if it was just because they were stored outside for so long, or what, but they didn't burn very clean for me. I am currently burning Vulcan, and some is burning better than others but better than the Indeck did last season. That being said, what isn't burning the best is because of moinsture, and again I bought it last fall after it sat outside in their yard all summer in the rain. The first year I got them, I bought in March or April and I store them inside so they were kept dry. Those burnt great.
I wouldn't be leery to try Indeck again, as I wrote them and complained, and they did send me a couple new bags in exchange for a couple of what I had. They said according to the tests they ran everythign was right in line with where they should have been. The 2 new bags did burn cleaner. I just burnt 1 bag of Indeck to every 2 bags Vulcan. When we moved in the previous owners left behind 1/3 a skid of Marth, but I wasn't overly impressed by them.
I've heard that softwood was more BTU's per lb. than hardwood, and I may try 1 skid of softwood to try it out. See how much longer a bag lasts or if I notice any difference.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
