Re: single to three phase , beat this with a rotary ?

Posted by Cas on March 05, 2012 at 08:03:41 from (74.65.46.158):

In Reply to: single to three phase , beat this with a rotary ? posted by buickanddeere on March 04, 2012 at 10:50:23:

I use a home made rotary phase converter. Powers
my lathe, 2 Bridgeports, Karcher pressure washer,
and 10 hp compressor. Electrical bill is reasonable. Checked with oscilloscope and patterns were not to bad(can use cnc mill with no problem). It is self exciting so it starts with the push of a button.
The only thing I am going to do sometime is build a box and put the 10 hp motor outside bedause it is quite noisy. Total cost was $275.

Replies:

• Re: single to three phase , beat this with a rotary ? Buickanddeere 08:59:52 03/05/12 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]