Posted by John T on February 24, 2012 at 05:34:02 from (66.87.4.142):
In Reply to: Electrical question posted by Mattcatlin on February 23, 2012 at 19:55:01:
First of all Id go ahead and create a 20 amp versus only a 15 amp branch circuit which means a 20 amp single pole 120 volt breaker and the use of 12 gauge pigtail wiring.
If you use wire nuts that avoids some of the worry of taping/insulating a split bolt.
Of course, all those splices need to be inside a junction box (grounded if metallic) in an accessible location.
Im NOT up to date on the latest NEC and have no idea if you have any local authority that has adopted any particular codes, but if the range is within 6 feet of your kitchen sink Id (for my own purposes and satisfactioin and peace of mind REGARDLESS IF ANY AUTHORITY REQUIRES IT) use a GFCI receptacle.
John T Thats how id do it but its your houme and money of course
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
