Posted by NCWayne on January 12, 2012 at 07:51:19 from (69.40.232.132):
In Reply to: Fuel and lubricants. posted by dej(jed) on January 12, 2012 at 07:25:36:
What misrepresentation have you seen concerning lubes? It's a fact that there are good oils and greases, better oils and greases, and there are those that aren't so good. Too there are those that are good in one situation but not so good in others. Personally I have one particular brand that I use because I have seen the results of it's use. I couldn't care less about any PR because in my book you simply can't get any better advertisement for a product than results and happy customers. Example, customer is using a very common, very well liked brand of oil in his compressor engines and getting approx 9 months out of the turbo's. I got him to switch to the brand I like because I've seen the results another customer had with it. Turbo life increased to well over 2 years. Granted the new oil cost twice as much but it also saved him at least $3200 per year just in the cost of the turbo repair alone, and that's not counting the expense of time lost when a machine went down. Not to bad for an extra $50 or so investment to buy a better oil.
Heck taking things into the grease side of things I've got another customer that resisted buying the better grease due to the it being twice as expensive. Once they started buying and using the better stuff they were able to extend their greasing intervals by three. In other words the more expensive grease actually cost them less to purchase and use because they used less of it. Then add in the additional production time provided to them that the operator previously spent greasing, the extended life of the machine because the better grease wasn't breaking down as quickly as the old stuff was, etc, etc. Taken all into account a little more expense for better grease both saved them money and made them money with increased production.
So, beyond the 'fairly tails' that better greases and oils are a good thing, what exactly are you talking about.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Search For Spares - by Anthony West (UK). Following on from the aquisition of the old Fordson F, I was very much in need of spares. As a novice though I didn't appreciate the fact that there were so many Fordson tractors made, that all the other makes seem rare by comparison. As far as I was aware a fordson was a fordson and it was only through trial an
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
