Posted by tomstractorsandtoys1 on January 09, 2012 at 08:05:05 from (64.136.27.226):
In Reply to: F345 Plow posted by 2510Paul on January 08, 2012 at 08:29:44:
They were an ok system for areas with only some rocks.In lots of rocks they were problems hit a rock ledge with all bottoms at once and oil can not move thru the lines fast enough and parts will break. On my grandfathers six bottom plow he switched to two accumalators hooked up to every other bottom, worked great after that. The accumalater was designed for non Deere tractors or two cyclinders.The tank is filled with nitrogen,when a rock is encountered the bottom raises up compressing the cyclinder and causing the oil to flow to the tank where the nitrogen is compressed after clearing the rock the nitrogen expands and pushes the oil back into the cyclinder forcing the bottom back in the ground.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.