Posted by Leroy on January 01, 2012 at 06:39:48 from (69.88.223.179):
In Reply to: Re: JD A hydraulics posted by Glenn Warner on January 01, 2012 at 03:58:59:
Yes, it can be done but it takes 2 people and a hoist of some kind to do it due to the weight and then to buy the power trol it will cost you as much as you paid for the tractor, perhaps more and for the Baker valve you still have to pull the whole power lift unit to install it and very good luck trying to find one. Got our first Deere a 1937 A in 1957 and been around Deeres ever since and altho I have heard of the Baker valve since the 50's I have yet to see one. Your cheapest way to do what you want to do with your A would be to go out and buy a 1950 to 1952 tractor with the single stick tranny, gas engine (38 max pto hp compaired to your 29 max pto hp and still same size and burn less fuel for the work) and power troll and with that you would have a slow enough speed, enough horse power, able to use that remote cylinder and the ability to put a 3 point hitch on it and with the roll a matic front end you might have enough weight on the front to keep it on the ground with a lighter weight 2 bottom plow. The 2 stick trannys are a fast low gear that low in them equals second speed in the single stick models.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Brief History of Tractors in Australia - by Bob Kavanagh. After Captain Cook's exploration of the east coast in 1770 the British Government decided to establish a penal colony in Australia. The first fleet arrived in 1788 and consisted mainly of convicts who were poorly equipped and new little of farming techniques. The colony remained far from self-supporting and it was not until the early 1800's that things started to improve. Free settlers started to arrive, they followed the explorers across the mountains and where land was suitable set up farms. T
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
