Posted by John Harmon on December 16, 2011 at 13:31:13 from (97.124.30.32):
In Reply to: Hearing loss posted by oldironman on December 16, 2011 at 06:59:37:
I wear or use which ever word fits ,dual range Phonak brand hearing aids all the time.Mine are programmable and I change range several times a day. My hearing loss is work related from 20 years of work in the construction industry. The last 12 years of my employment was working in various nuclear power plants.40 to 60 hours a week in that noisy environment degrades your hearing extremely so.We were required to wear hearing protection but what was provided was not really adequate protection in my opinion. A small shaped foam plug stuck in your ear canal is not much protection.Some of the plant areas required ear phone type noise suppressors and by and large they worked well.I am aclimated to the fact my lack of hearing ability is compromised so now i hope I don"t lose one or both of my hearing units or that my hearing does not get worse.Every one owes them selves to have their hearing checked at least once a year if not more often.JH
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.