Through just some quick figuring the mix works out to around 14% protein with those 40% pellets, so I would not offer alfalfa hay in addition to this, but you could cut back on the pellets and feed the alfalfa. This would definitely be cheaper than pellets, but if you have an ionophore (Bovatec, Rumensin, etc.) in the pellet you will need to do something to get that same level of ionophore into the cattle that you would have had with the pellets. I also think the molasses is unnecessary- we've fed soybean oil with an additive to make it smell like butterscotch to make it more appealing to calves (@20# oil/ton of feed), but we mostly use the oil to cut down the dust for our own benefit, not the cattle. I also agree an extension agent or ag-school teacher would be helpful. Feed company nutritionists know their stuff too, but have additional interests at stake which may not be in your best interest. Good Luck. LonM
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: JB Weld - by Staff. JB Weld is basically an epoxy glue that does an exceptionally good job of bonding to cast iron and steel along with several other materials. As I mentioned, it is so common that I have yet to buy a tractor that did not have JB Weld used somewhere. It is sometimes used so well you can't tell its there and other times used as a sloppy quick fix. Finding where and how it can be used correctly is key to whether you are using it as an "inelegant hack" or an integral solution to difficult and expens
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
