Posted by MeAnthony on November 01, 2011 at 18:34:36 from (74.204.60.35):
I have a '91 Dodge Dakota, 3.9L V6, 5 speed manual, 4x4. The transmission is a NP535/NV2500.
Now the problem: at the rear of the trans, on the top passenger side corner(about 1:00 o'clock position when viewed from the rear), there is a hole drilled in the case. It's a smooth bore, no threads, about 5/16" or so diameter. I am losing transmission fluid out this hole. I spoke to parts guy at the local Dodge garage this afternoon. He says yes, parts diagram shows a one-way valve of some sort there but is labeled NS-1, meaning no longer manufactured? So...no help from the Chrysler camp.
There is a metal pipe nipple on the top of the trans case, just behind the shifter, where the breather hose is attached.
What is this valve and where can I get one?
I don't recall ever seeing two vents on a transmission before. Can anyone explain why it has two?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - My Ford Golden Jubilee - by Troy Estes. This article is about my '53 Ford Jubilee and a story that starts with taking the tractor to my brother's Starter/Alternator Rebuilding shop for a wiring fix. The generator was shot as well as all the wiring. I dropped off the tractor expecting a transformation from a 6 volt to a 12 volt system utilizing the original generator housing, and a total rewiring of the whole tractor. The front end center pin bushing was worn also so I ask that they replace it if they had time. Well, that’s wha
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
