Posted by YesterdayRick on October 22, 2011 at 12:08:40 from (173.210.135.12):
I have an early 60s JD 4020. I recently changed out the hydraulic pump (driven off of front of motor; bought rebuilt pump with warranty $1200!!) and everything worked just fine last weekend. Today, pump sounds like it may be cavitating a bit when under load (i.e. makes a grattling sound when under load). I can raise the front end loader but it goes up really slow, seems the pump isn't pressuring up enough. Hydraulic oil level is topped right up and brakes, transmission, steering etc. work fine, changed hydraulic oil filters (2 filters as its a power shift transmission) prior to starting up after changing out pump, no leaks to speak of; basically everything works good except the pump makes a noise when under load that I don't recall hearing last weekend and front end loader doesn't work properly (neither smooth nor quick) both raising and tilting the bucket. Thought perhaps it may be sucking air? There is a cooler which I believe ties into the suction side of the pump via a ~1.25" rubber hose, tightened clamps up and doesn't appear to be leaking however may be very slight leak on cooler itself but its been there every since I bought the tractor. Any other ideas?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
