Posted by John S-B on October 03, 2011 at 19:30:20 from (64.12.116.74):
Anybody harvest black walnuts? This year is the first year I've tried it. TONS of them here in Central Oh. I picked up a 30gal. trash can at work. (had to pick them up to mow out front, it's great being paid to do it!!) That was from one side of one tree, the other half is on the property next door. And only half of the nuts have fallen. Picked up a couple of buckets in front of the house and from a couple of small trees on my property as well. I could easily fill a dump truck with all the nuts that have fallen from trees by the roads around here that nobody bothers with, they just let them lay there. I've been worried about one hitting the windshield driving down the road there's so many walnut trees around here! I put them in a small cement mixer with 3-5" stones to knock off the husks, then hosed them off in an old 2 gal. plastic tree pot (the kind you get them in at the nursery). Then rinsed in a bucket of water and the floaters got pitched. I let the water run out in the gravel where I park equipment, it's supposed to be a natural herbacide, so we'll see how that works. Got enough out of that batch to cover a 3x4 screen I have mounted on a frame. I'll let them set for a few weeks then work on cracking the hulls and getting the nut meats out. It took about four hours to process the first lot, I may do a second round. I hope to get 2-3 quarts out of each batch. I know, it's a lot of work.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
