Posted by Inno on September 30, 2011 at 14:31:04 from (70.54.184.7):
In Reply to: ? for Allen in NE posted by Jerry he on September 30, 2011 at 05:44:08:
Lumpy said: (quoted from post at 14:53:56 09/30/11) Wish they were available for 6v systems.
I think they are, check out the pertronix website.
I put a Pertronix electronic ign. on my 202 (Continental Z134) along with a new coil, plug wires and plugs and what a difference!
It starts almost instantly in any weather, it runs smoother, haven't fouled a plug in over a year since installing it and it will idle down below 200 RPM (I can take a video of it if there are non believers) and all you can hear is a little valve noise, not much from the exhaust. You almost can't tell it's running. I have run it all year in temps from -20�F (or so) all the way to 90�F. So far I see nothing but benefits from the system.
This post was edited by Inno at 14:40:56 09/30/11 3 times.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
