A contract is written evidence of what you and the individual/company doing the work agree to. So it can contain whatever you want and both agree to. Some suggestions: 1) Do NOT pay out all the money till the job is done. Tough part is figgering out how much to hold back, some guys will keep coming back for 5-10% others will disappear when they have collected 75%. In framing my house I tried to hold back 25% but was soft-hearted and fell for a sob story and paid in full before it was done. Now we're in a lawsuit which is just costing more. Typically these type of guys don't own anything--it's all in the wife's name. 2) Always, Always have a signed contract. For the concrete work I had a signed contract and he more then lived to it; an absolutely honest person. The framer acted the same up front and I agreed to let it be without a signed contract, even though it was written. That then becomes an oral contract, but at least the terms are documented. I'm winning but it's costing lots more. Most contractors have a contract they like to use, go over it and insert/remove what you don't like; work for an agreement. If anyone refuses to sign get different contractor!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: Lead Substitutes - by Mike Schordine. Lead was oriinally added to gasoline as an upper cylinder lubricant. It lubes the valves and seats. If you rebuild the motor, you could use hardened seats and valves, and unleaded fuel. But if your old tractor runs good, a simple lead substitute added to the gas is a perfectly reasonable solution. And, if you are like me, your tractor is under cover, but it sits outside. So with every temperature change, the humidity in the air collects in the fuel tank, in the form of water.
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
