Posted by wolfman on July 07, 2011 at 19:06:34 from (174.140.65.158):
In Reply to: Gasoline Hoarding? posted by Paul Simmer on July 06, 2011 at 17:59:53:
Do you guys all realize that each time you release the gas nozzle to change cans you lose about a dollar! Somehow when you release the lever the gas is siphoned back down in the tank. That's why if you watch the dollar amount at the pump when filling a plastic can, when you first here the splash the gauge is already at 40 cents or so. That's why cars that are supposed to get 30 mi per gal don't. The States weights & measures guys don't do good work. They see the last reading on the pump and check to see if the $20 divided by the listed price equals the gallons the pump states. They in no way check to see if you really get a gallon (231 cu in) when the pump says 1 gal. Case in point: The other day I put $40 in one pickup. Got 9.4 gal. Minutes later took other pickup & two little cans for mowers. Same station, same pump, filled one can, then the second, finished the $40 in the truck; got 8.6 gal. Shutting off the gas flow quickly twice cost me .8 gal, about $3.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.