[an error occurred while processing this directive]
Classic Truck Discussion Board |
Posted by John Ne. on May 07, 2004 at 13:24:48 from (209.74.227.253):
In Reply to: Re: No spark posted by 26Red on May 07, 2004 at 11:36:39:
Also check the little wire that grounds the breaker plate inside the distributor, am sure there is one on that model, also check the coil wire, coming from the tower to the distributor. If you end up with spark at the coil wire and none at the plugs, inspect the rotor thoroughly.
[an error occurred while processing this directive]
|