Posted by 1 Dollar on December 03, 2008 at 18:29:57 from (65.29.88.166):
So I went around and got anout 130lbs. of wheel balancing weights from some local tires shops. (the big stores don't give it away, try the little guys). I got it all for free, so the was awesome! I was also given about 10lbs. of pure lead sheets from old x-ray films by a doctor, so I'm up to 140lbs before melting down.
Pretty simple from there, melt down the lead. I did end up casting it though, since I has so much. I used a metal spackling mix pan as the mold.
Here is my set-up, I just used a wood fire.
I just put those handles on the pot to put myself further away from the hot stuff. I wore welding gloves. Holding 52lbs. of molten lead at that distance from my body was heavy enough!
I didn't get any action shots, but here is what the "bricks" look like: And here is the mold I used. You can buy them at any hardware store. I did spray it with cooking spray, and the lead popped right out.
So there are the surprisingly good results. I ended up with 120lbs. of cast weight, so I lost about 20lbs. in steel clips off the weights.
Those weights will go on the front of this snowplow, right on top of that rusty weight that is already up there.
Hope somebody learns something here. I'm just trying to give back a teeny bit :-)
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
