Re: How to reduce vibration in compressor air line

Posted by ScottP on August 09, 2004 at 08:32:34 from (4.243.146.99):

In Reply to: How to reduce vibration in compressor air line? posted by Brad on August 08, 2004 at 10:39:34:

Brad
There are several things to consider when sizing your flexable hose. Just because you used 3/4" pipe for your lines doesn't mean you have to use 3/4" flex. Are you using a 3/4" air hose off your line with out a regulator? Probably not. The line from the tank to the regulator is high pressure, and low pressure after the regulator. So you could use as small as 3/8" line from your tank to your line which is under high pressure, and your not going to out run the compresser even with a wide open air hose as long as your regulator and compresser are working properly.
Scott

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]