Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums

Ford and New Holland
Master Parts List
[Show Pictures]
For 9N, 2N and 8N Parts, CLICK HERE.
 
Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5 8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1 2 inches x 9-1 2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)$264.00

 
Brakes
Ball Bearing - Bearing is used as the as an outer brake shaft bearing on 1710 Offset Tractors, two used. Measures 1.181 inch inside diameter, 2.440 outside diameter and 0.629 wide. Replaces 210064, 9N715B, 9N715BC, 9N715C, SBA040106206 (Part No: 9N715BC)$4.76

Brake Actuating Assembly - Brake Actuating Assembly, 9 inch. Replaces C7NN2N317A, 83909808, 87554517. (Part No: C7NN2N317A)$70.78

Brake Actuator Assembly, 8 - For tractor models 2810, 2910, 335, 340, 340A, 340B, 3900, 3910, 4000, 4100, 4110, 420, 4400, 445, 445A, 450, 4600, 4610, 515, 532, 540, 540A, 540B, 545, 545A. (Part No: D5NN2N317A)$98.04

Brake Actuator Rod - For tractor models (5610, 5900, 6610, 6710, 6810, 7610, 8010 all 5 1989 and up), 5610S, 6610S, 7610S, 7810S, 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110. (Part No: E8NN2466DA)$19.62

Brake Adjuster Assembly - Brake Adjuster Assembly. This part measures 4 1 4 inches at it's shortest length, fully screwed together. If you need a shorter one, the threaded side can be cut to make a shorter piece. `` Also can replace early type brake adjusters. Fits 2000, 2110LCG, 230A, 231, 2310, 233, 234, 2600, 2610, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 4110LCG, 530A, 531, Dexta, Super Dexta. Replaces OEM numbers C5NN2N046B, 957E2039, 957E2043, 957E2044, 81815741. (Part No: 1850213M91)$16.38

Brake Adjusting Hole Cover - This brake adjusting hole cover is for tractor models 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, (2000, 4000 4 cylinder) all from 1948 to 1964. (Part No: H2092)$2.95

Brake Anchor Pin Retainer - This brake anchor pin retainer is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964) (Part No: NCA22286A)$7.58

Brake Backing Plate - Fits 2000, 3000, 4110 (Dec 1966 and newer), 2600, 3600, 231, 233, 333, 335, 531, 2310, 2610, 3610, 230A, 234, 334, 530A. Replaces 81815610, C5NN2212D (Part No: C5NN2212D)$162.11

Brake Backing Plate - For 8N, NAA, Jubilee. Brake Backing Plate Restoration Quality, with felt seal. (Part No: 8N2255)$68.34

Brake Backing Plate Felt Seal - For tractor models 8N, NAA, Jubilee. This part repairs 1 wheel, 2 required per tractor. (Part No: 8N2217)$3.95

Brake Back Plate Dust Seal - This brake back plate dust seal is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1958 to 1964). (Part No: NCA2217A)$7.95

Brake Cable, Left Side - This Brake Cable is 946mm (26.7 Inches) overall length. Outer Cable length is 725mm (28.50 Inches). It is used on the Left side on: 230A, 2310, 234, 2610, 2810, 2910, 333, 334, 335, 335, 3610, 3910, 4110, 4610, 5110, 530, 530A, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8210. For Right Side, Order E1NN2853AB. Replaces E1NN2853AB, 83957515, E1NN2853AA (Part No: E1NN2853BC)$38.99

Brake Camshaft Hole Cover Spring - This brake camshaft hole cover spring is for tractor models 8N, Jubilee, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948 to 1964). (Part No: 8N2322)$2.50

Brake Cover - Cover, Brake Camshaft Hole. This is an EXACT reproduction of the ORIGINAL brake cover. For tractors: 8N, NAA (1948 TO 1954). (Part No: 8N2224)$3.95

Brake Cross Shaft - 16-5 16 inches long, 1-1 8 inch diameter. For tractor models (2000, 3000 up to 10 1972), (2110LCG, 3400, 3500, 4110LCG up to 10 1972). (Part No: D1NN2473B)$48.99

Brake Cross Shaft Bushing - Measures 1 inch long, 1 inch inside diameter and .010 thick. Press into transmission housing {one on each side}. Sold each. For tractors: 9N, 2N, EARLY 8N {1939-1949}. Fits some later Ford models, verify measurements to ensure fit. (Part No: 782477)$4.95

Brake Cross Shaft Bushing - Measures the same as 782477 except only 1 2 inch long. Presses into transmission housing. For tractors: LATE 8N, NAA, Jubilee {1949-1954}. (Part No: C0NN2477)$4.95

Brake Cross Shaft Bushing - Outside diameter 1 1 4 inches, inside diameter 1 1 8 inches, length 1 inch. Fits 2000, 3000, 4000, 5000, 7000, 2600, 3600, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8010, 8210, 3230, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, TS90, TS100, TS110. INDUSTRIALS: 230A, 231, 234, 250C, 260C, 2110LCG, 334, 335, 340A, 345C, 3400, 3500, 3550, 420, 445, 450, 4400, 4500, 530A, 531, 532, 535, 540, 545, 550, 555, 5500, 650, 655, 6500, 750, 755, 7500. (Part No: C5NN2N477A)$4.29

Brake Disc - 12 inch outside diameter, 15 spline. For tractor models (2355N, 2555, 2755, 2855N serial number 668665 and up), (2955, 3155 serial number 669174 and up), 3055, 3255. (Part No: AL65871)$105.35

Brake Disc - This 16 Spline Brake Disc replaces OEM part numbers 81878142, SBA328110150, 83965913. For tractor models TC25, TC25D, TC29, TC29D, TC29DA, TC30, TC31DA, TC33, TC33D, TC33DA, T1510, T1520, T2210, T2220, 1320, 1520, 1530, 1620, 1630 (Part No: SBA328110151)$62.96

Brake Disc - Used in late production, this disc has a 1-9 32 wide facing. This disc is 8.070 inches outside diameter, 2.086 inches inside diameter with 22 splines. Replaces Ford part numbers 86529646, E9NN2N097AA, 83983209, E9NN2A097AA (Part No: E9NN2A097AA)$28.71

Brake Disc - For 3550, 4000, 4200, 4500. All 1965-1975. Friction Brake Disc for Wet Brakes. 8 inch diameter, 22 Spline. (Part No: C5NN2A097B)$34.79

Brake Disc - For tractor models: 3900, 4100, 4600. Industrials: 420, 515, 532, 535, 340, 445, 540, 545, 550, 555, 650, 750, 5500, 5550, 6500, 7500. All 1975-1980. Also for 3910, 4110, 4610. Industrial 555. All 1981 and up. Friction Brake Disc for Wet Brakes. 8 inch diameter, 22 Spline. (Part No: C5NN2A097B)$34.79

Brake Disc - For tractor models (5100, 520, 7100, 7200 1965-1975), (5600, 5700, 6600, 6700, 7600, all 1975-1980), (5610, 6610, 6710, 7610, 7710, 7910, all 1981 and up). Intermediate Steel Brake Disc 8.819 inch O.D. and 2.086 inch I.D. 22 Teeth. 5 8 inch wide facing. C7NN2A097B, C5NN2A097A, 83956599, E6NN2A097AA, 83956599. (Part No: C7NN2A097B)$33.21

Brake Disc, 9 Inch - With 1-9 32 inch wide lining, this disc was used in later production than the 5 8 width lining. This disc is 8 7 8 inches outside diameter, 2 1 8 inches inside diameter, facing width 1.31 inches, 22 internal tooth count. Used with 9 inch actuators. This part replaces Ford part numbers E9NN2A097BA, E9NN2N097BA, 83989830, 81818854, 83956599, E6NN2A097AA, 87518036, C7NN2A097B. (Part No: E9NN2A097BA)$39.28

Brake Disc, Intermediate Steel - Used with 9 inch actuators, this intermediate steel disc measures 8.976 outside diameter and 5 inch inside diameter. This part replaces Ford OEM numbers E6NN2N315AA, E6NN2N615AA, 83956598. Used on the following with 9 inch actuator disc brakes: 3600, 4600, 5000, 5100, 5110, 5200, 532, 5340, 5500, 5550, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 650, 6500, 660, 6600, 661, 6610, 6610S, 6640, 6700, 6710, 681, 6810, 7000, 7010, 7100, 7200, 7410, 755, 7600, 7610, 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8030, 8210, 8240, 8340, TS100, TS110, TS120A, TS6000 Brazilian, TS6020 Brazilian, TS6030 Brazilian, TS6040 Brazilian, TS80, TS90 (Part No: E6NN2N315AA)$12.15

Brake Disc, Lined - For tractor models 3010S, 3830 Orchard, 4330 Vineyard, 4430 Orchard. Replaces 5159830. (Part No: S.62206)$27.75

Brake Disc, Steel - For tractor models 3010S, 3830 Orchard, 4330 Vineyard, 4430 Orchard. Replaces 5119327. (Part No: S.62207)$20.10

Brake Drum - For tractor models 1700, 1900, 1910. (Part No: SBA328510060)$199.18

Brake Drum - For tractor models 8N, NAA, Jubilee. Additional $10.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 8N1126)$113.30

Brake Drum - Fits 2000, 3000, 2600, 3600, 2310, 2610, 3610, 230A, 231, 334, 335, 530, 531. Additional $10 Shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C5NN1126E)$77.51

Brake Drum - This cast iron brake drum is for tractor models 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (Prior to 10 1965). Replaces 86533415, NCA1126A. (Part No: NCA1126A)$104.37

Brake Drum Repair Kit - For tractor models 8N, NAA Jubilee. Replaces: 8N2027B Contains: anchor (2), H2041 adjuster screw, 8N2217 felt backing plate seal, 8N2048 adjuster socket, 8N2223 adjuster nut, 8N2049 adjuster spring, 8N2297B return spring, (8N2299 secondary spring. This spring is used on the left side only). Brake Hardware Kit for 1 wheel. 2 used per tractor. (Part No: 8NAA2250)$33.98

Brake Drum Screw Kit - This Brake Drum Screw Kit contains 4 3 8 inch-16 x 3 4 inch screws, enough for one Brake Drum. Used on 8N and NAA, Jubilee. Order 2 sets per tractors. (Part No: 24667KIT)$1.95

Brake Master Cylinder - For tractor models 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100. Replaces 81869963. (Part No: F0NN2140AD)$191.82

Brake Master Cylinder Repair Kit - For tractor models 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110, TS115. (Part No: F1NN2004AA)$61.41

Brake Master Cylinder Repair Kit - This Brake Master Cylinder Repair Kit contains (2) 1-1 8 inch diameter pistons, (2) C7NN2173A cups, (2) C7NN2004A spring and retainers, (2) 277688 snap rings, (2) C7NN2180A boots. Replaces OEM part number C7NN2004A. Fits 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW5. (Part No: C7NN2004A)$61.37

Brake Pedal Return Spring - Brake Pedal Return Spring measures 3 1 4 inches and wire thickness of .100. `` Fits tractors: 2000, 2300, 2310, 2600, 2610, 3000, 3610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 3400, 3500, 4110LGC, 530A, 531 (Part No: E1NN2472BA)$1.52

Brake Pedal Shaft - 18.46 inches in length. For tractor models 2000-1972 and later, 2100, 2110, 2120, 2150, 2300, 231, 2310, 233, 2600, 3000-1972 and later, 3100, 3120, 3150, 3190, 3300, 3310, 333, 3330, 335, 340, 3400, 340A, 340B, 3500, 3600, 3900, 4000-1972 and later, 4100, 4110, 420, 445, 445A, 4600, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A. Brake pedal return spring E1NN2472BA and bushing C5NN2N477A are available separately. (Part No: D9NN2N337FA)$105.35

Brake Repair Kit - This Brake Repair Kit is for all 4-cylinder Ford tractors built from 1955 through 1964, except Majors. Kit includes all the small parts for comprehensive rebuilding of brake actuating mechanism when installing new shoes. Kit does not include shoes. Kit is complete for one wheel. Replaces: (4) Spring Clip: 6H2066, (1) Adjuster Socket: 8N2048, (1) Adjuster Nut: 8N2223, (1) Adjuster Screw: H2041, (1) Felt: NCA2217A, (2) Collar : NCA22218A, (2) Retainer Pin: NCA22276A, (2) Clip: NCA22286A, NCA2250, (1) Spring: NCA2296B, (2) Pins: NCA2333A, (2) Spring: NCA2204A, NCA22275A, NCA22219A (Part No: NCA2250)$49.95

Brake Repair Kit - For tractor models 9N, 2N from 1939-1947. (Part No: 9N2065)$28.50

Brake Rod Seal - For tractor models (750, 6600, 6700, 7500, 7600, 7700 from 1975-1980), 5000, 5610S, (6610, 6710, 7610, 7710, 7910 from 1981), (7100 from 1965-1975), 6610S, 6810S, 7610S, TV140, TV145, TV6070. Ford 86576339 (Part No: C5NN2N336A)$3.74

Brake Rod Seal - For tractor models 3000, 4000, 5000, 7000, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2810, 2910, 3910, 4110, 4610, 5610, 5610S, 6610, 6610S, 6710, 6810, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210, 3230, 3430, 3930, 4130, 4630, 4830, 5030, (5640, 6640, 7740, 7840, 8240, 8340 with 8 x 2 or 16 x 4 transmission), 250C, 260C, 335, 340, 340A, 340B. Replaces E7NN2N336A, 85999093. (Part No: C5NN2N336A)$3.74

Brake Rod Seal - For tractor models 345C, 345D, 3550, 420, 445, 445A, 445C, 445D, 455, 455C, 455D, 4400, 4500, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 650, 6500, 655, 655A, 655C, 655D, 675D, 750, 7500, 755, 755A, 755B. Replaces E7NN2N336A, 85999093. (Part No: C5NN2N336A)$3.74

Brake Shaft Felt Seal - This Brake Shaft Felt Seal measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Part No: 8N3586)$1.20

Brake Shaft Felt Seal - This Brake Shaft Felt Seal measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Part No: 8N3586)$1.20

Brake Shaft Felt Seal - This Brake Shaft Felt Seal measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Part No: 8N3586)$1.20

Brake Shaft Seal - This Brake Shaft Seal measures 1.565 inch outside diameter, 1-1 16 inch inside diameter. It replaces original part numbers C5NN2473F, C5NN2473H, C5NN2N258C, D2NN2N258A, D8NN2N289AA, D9NN2N289AA, 65968, 83924047. (Part No: D9NN2N289AA)$3.12

Brake Shaft Seal - This Brake Shaft Seal measures 1.565 inch outside diameter, 1-1 16 inch inside diameter. It replaces original part numbers C5NN2473F, C5NN2473H, C5NN2N258C, D2NN2N258A, D8NN2N289AA, D9NN2N289AA, 65968, 83924047. (Part No: D9NN2N289AA)$3.12

Brake Shaft Seal - This Brake Shaft Seal measures 1.565 inch outside diameter, 1-1 16 inch inside diameter. It replaces original part numbers C5NN2473F, C5NN2473H, C5NN2N258C, D2NN2N258A, D8NN2N289AA, D9NN2N289AA, 65968, 83924047. (Part No: D9NN2N289AA)$3.12

Brake Shoe - Shoe, with lining, 2 inches wide. Price shown is for each, sold only in multiples of 2 items. (Part No: C7NN2218A)$28.44

Brake Shoe - For tractor models Dexta, Super Dexta. 2 Inch Brake Shoe. Replaces 81717217, 957E2019A. Price shown is for each, must be ordered in quantities of 2. If you order 2, you will get 2 shoes. (Part No: M06-01-01)$43.35

Brake Shoe Adjusting Screw Spring - This Brake Shoe Adjusting Screw Spring is for tractor models: 501, 600, 700, 800, 900, 2000, 4000 series. 1801, 2030, 2130, 3500, 2100, 2300, 3000 (1955 to 1964). This item is priced EACH piece. If you order quantity of 1, your order will be adjusted to quantity of 2. Also replaces part numbers 49141 and 80049141. (Part No: NCA22219A)$3.42

Brake Shoe Anchor Pin - This brake shoe anchor pin is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964). (Part No: NCA2333A)$3.77

Brake Shoe Anchor Pin Collar - 1 inch outside diameter, 3 4 inch inside diameter, 9 16 inches wide. This brake shoe anchor pin collar is for tractor models: 501, 600, 601, 700, 701, 800, 900, 901, 2000, 4000 series (1955 to 1964). (Part No: NCA22218A)$4.71

Brake Shoe Hold Down Spring Pin - This brake shoe hold down spring pin is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964). (Part No: NCA22276A)$2.52

Brake Shoe Lining Set - Includes 4 brake linings and rivets. For tractor models Dexta, Super Dexta. (Part No: 957E2021B)$46.47

Brake Shoe Retaining Pin Kit - This kit will do 1 set of brakes. 2 kits required per tractor. Contents for 1 kit is as pictured. For models 3500, Dexta, Super Dexta, 2000, 2100, 2110, 2120, 2150, 230A, 2300, 231, 2310, 233, 234, 2600, 2610, 3000. Replaces VPJ7300, 81717336, 81802465, 81802473, 82019841, 957E2069A, 957E2068, 957E2066 (Part No: 1810029M91)$5.00

Brake Shoe Retracting Spring - This brake shoe retracting spring is for tractor models 501, 600, 700, 800, 900, 2000, 4000 series (1955 to 1964). (Part No: NCA2296B)$19.10

Brake Shoe Return Spring, RH Brake - This RH brake shoe return spring is for tractor models 8N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1948 to 1964). (Part No: NCA2204A)$6.23

Brake Shoes - Set of 4. For tractor models Fordson Major, (Power Major 1 1961 and up). SPECIAL ORDER item please allow up to 30 days for delivery. (Part No: E27N2019E)$110.40

Brake Shoe Set - Includes 2 brake shoes. For tractor models 1000, 1600. Replaces SBA328100030, SBA328010020. (Part No: SBA328100031)$174.35

Brake Shoe Set - Includes two brake shoes. Replaces 4.874 inch diameter brakes. For model 2110. Replaces SBA328100042, SBA328100041. (Part No: 87344272)$120.16

Brake Shoe Set, Set of 4 - Set includes 4 Brake Shoes with bonded lining. For 9N and 2N. (Part No: 9N2019)$76.04

Brake Shoe Spring, Primary to Secondary - This Spring is 5-3 16 inches over all, has a 2-11 16 inch coil length and a 5 8 inch coil diameter. It is used on tractor models Dexta, Super Dexta, 2000, 2110LCG, 230A, 231, 2310, 233, 234, 2600, 2610, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 4110LCG, 530A, 531. Replaces original part numbers 957E2035, 81717325, C5NN2B289A (Part No: 957E2035)$2.07

Brake Shoes, Set of 2 - Set of 2 Brake Shoes for Ford Compact tractors 1300, 1310, 1500, 1510, 1710. These shoes have an end pad thickness of 6 MM. This is not the brake pad, but the mounting pad on the end of each shoe. They will not replace the 9 MM thick pads. Replaces SBA328100021, SBA328100020, 83921592 (Part No: 87344269)$118.20

Brake Shoes, Set of 4 - Complete set of 4. For 8N, NAA, Jubilee. (Part No: 8N2200B)$51.91

Brake Shoe with Bonded Lining, Pack of 2 Shoes - This shoe is 1 1 2 inch wide, 13.25 inch diameter. Brake Shoe For 2000, 3000, 4110 (12 1966 & up), 2600, 3600. Replaces C5NN2218F. Also replaces F2NN2218A. (Part No: D9NN2218AA)$43.19

Brake Shoe with Lining - This Brake Shoe is 1 1 2 inches wide and 13 inches in diameter. For tractor models (2000, 3000, 4110 all from 1 1965 to 11 1966). Price shown is for each, sold only in multiples of 4 items. (Part No: C5NN2218E)$23.70

Brake Shoe with Lining, Pack of 2 Shoes - This brake shoe with lining is for tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1955 to 1964). (Part No: NCA2218B)$25.89

Brake Slave Cylinder - For tractor models 5640, 6640, 7740, 7840, 8240, 8340, TS100, TS110, TS115, TS120A, TS6.110 Brazilian, TS6.120 Brazilian, TS6.125 Brazilian, TS6.140 Brazilian, TS6020 Brazilian, TS6030 Brazilian, TS6040 Brazilian, TS90, TV140. Replaces E9NN2N448AB, 83997398, 81866484 (Part No: E9NN2N448AB)$67.96

Brake Spring - Also replaces 83922128. For tractor models 1300, 1310, 1500, 1510, 1710, 1710O. (Part No: SBA398210250)$13.28

Brake Stator Plate - 4.624 inch inside diameter. Replaces 83965912. For tractor models TC25, TC25D, TC29, TC29D, TC29DA, TC30, TC31DA, TC33, TC33D, TC33DA, T1510, T1520, T2210, T2220, 1320, 1520, 1530, 1620, 1630. (Part No: SBA328560190)$21.33

Brake Support Plate Stud - This is an EXACT reproduction of the ORIGINAL brake support plate stud. For tractors: 8N, NAA (1948 TO 1953). (Part No: 350920S8)$3.50

Disc Brake - Measures 6.892 inch outside diameter, 1.401 inch inside diameter, 19 Teeth and .154 inch thickness at the outside edge. For tractor models TC35, TC35A, TC35D, TC35DA, TC40, TC40A, TC40D, TC40DA, TC45, TC45A, TC45D, TC45DA, TC48DA, TC55DAT, 2310, 1720, 2120. (Part No: SBA328110161)$66.82

Disc Brake Ball Bearing - Measuring 7 8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Sold individually. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Part No: M830T)$2.79

Disc Brake Lining Kit - Fits Super Major. Kit contains 4 linings with 48 rivets for 1 side, 2 required for tractor. (Part No: E1ADDN2284)$37.80

Felt Brake Dust Seal - This Felt Brake Dust Seal is used on Ford 9N and 2N Tractors 1939 to 1947. It replaces original part number 9N2217. Two used per tractor. Sold individually. (Part No: 9N2217)$6.50

Hand Brake Disc - Diameter 4 inches, 1-1 4 inch hub, 23 splines. Also replaces: D5NN2N625A and C5NN2N625B. Fits Tractors: (2000, 3000, 4000 all from 1965 and newer - UK), (2000, 3000, 4000 all from Jan 1972 and newer - USA), 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3900, 3910, 4100, 4110, 4600, 4610, 5600, 5610, 5900, 6600, 6610, 6700, 7600, 7610, 7700, 7710. Fits INDUSTRIALS: 230, 231, 233, 234, 333, 335, 340, 3500, 3550, 420, 4400, 4500, 445, 450, 515, 531, 532, 540, 540, 545, 5500, 5550. Replaces C5NN2N625B, D5NN2N625A, E9NN2N625AB, 83906199, 81867258 (Part No: E9NN2N625AB)$26.37

Hand Brake Switch - This Hand Brake Switch is used on Ford New Holland models: 4835, 555E, 5635, 575E, 655E, 6635, 675E, 7635. Also used on Fiat Tractors. Replaces 5131017, 05131017, 4999853 (Part No: 5131017)$24.02

Intermediate Steel Brake Disc - For tractor models (5100, 5200, 7100, 7200, all 1965-1975), (5600, 5700, 6600, 6700, 7600, 7700, all 1975-1980), (5610, 6610, 6710, 7610, 7710, 7910, all 1981 and up). Intermediate Steel Brake Disc, 9 inch diameter. (Part No: C5NN2N315A)$11.25

Intermediate Steel Disc - Intermediate Steel Disc, 8 inch diameter. For 340, 3550, 3900, 3910, 4000, 4100, 4110, 420, 4200, 445, 4500, 4600, 4610, 515, 532, 535, 540, 545, 550, 5500, 555, 5550, 650, 6500, 750, 7500. (Part No: C5NN2N315B)$5.97

Parking Brake Lever - For tractor models NAA, Jubilee, 600, 700, 800, 900 all from 1953-1957. (Part No: NAA2782A)$23.45

PTO Brake Arm - For tractor models 5000, 7000, 5600, 6600, 6700, 7600, 7700, 5610, 6610, 7610, 7710, 7810, 7910, 8210, 7740, 7840, 8240, 8340, 8670. (Part No: C9NNN747B)$27.75

Spring - Spring. Rear Wheel Brake Disc Return. Tractors: 3550, 4000 (except 4110), 5000, 7000 (1965-1975), 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 420, 515, 532, 535 (1975-1981), 2810, 2910, 3910, 4110, 4610, 5610, 5900, 6610, 6710, 7610, 7710, 7810, 7910, 8210 (1981-10 1991), 3230, 3430, 3930, 4130, 4630 (3 1990 and up), 5640, 6640, 7740, 7840, 8330 (with Mechanical Brakes) (11 1991 and up), 5610S, 6610S, 7610S, 7810S (1 1994 and up). (Part No: C5NN2N320A)$2.82

Spring, Pedal Return - Brake Pedal Return Spring with disc brakes. (Part No: E1ADDN2456)$9.03

 
Clutch
Clutch Alignment Tool - 15 16 inch 10 spline, 1-3 8 inch 19 spline, .468 inch pilot. For tractor models 1000, 1500, 1600, 1700, 1900, 1310, 1510, 1710, 1320, 1520, 1620, 1720, 1925, 1530, 1630. (Part No: AG01)$9.14

Clutch Alignment Tool - 1-3 8 inch 10 spline, .67 inch pilot. This clutch alignment tool is for tractor models with single clutch: 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900. (Part No: 1112-5996)$7.56

Clutch Alignment Tool - For a duel clutch with 1 7 8 Inch 29 spline and a 1 inch with 10 splines. Verify measurements to ensure you order correct tool. Used on models 2000 series, 3000 series, 3600 series, 3610 series, 3910 series, 4000 series, 5000 series, 6000 series, all some agricultural and construction models. (Part No: 1112-5805)$16.98

Clutch Alignment Tool - For a Double Clutch. The Large Spline is 1-7 8 inches with 29 Splines. The Small Spline 1 inch with 15 Splines. Pilot Diameter is 0.670 inches. This can also be used for 15 spline single clutches that match pilot and 1 inch by 15 spines. (Part No: AG15)$13.53

Clutch Bearing - Pilot - Pilot Ball Bearing, for PTO Drive Plate. Inside diameter 1.4370 inch, outside diameter 2.6772 inch, width 0.5906 inch. Replaces 83992560, F0NNN779AA (Part No: F0NNN779AA)$7.71

Clutch Bearing - Pilot - Pilot Ball Bearing, for PTO Drive Plate. Inside diameter 1.4370 inch, outside diameter 2.6772 inch, width 0.5906 inch. Replaces 83992560, F0NNN779AA (Part No: F0NNN779AA)$7.71

Clutch Cover Assembly - Pressure Plate Assembly, 12 inch Single Clutch. For tractor models 5000, 5600, 5610, 5700, 6600, 6610, 6700. (Part No: E0NN7563CA)$118.59

Clutch Cover Assembly - 13 inch, 4 Lever, Halo Ring and 1-7 8 inch, 29 spline IPTO Hub. Tractors: 2810, 2910 (5 1983-2 1990), 3230, 3430, 3630, 3910 (5 1983-2 1990), 4110, 4130, 4330, 4340, 4400, 4410, 4500 (1 1965-1975), 4600, 4610, 4630, 4830, 5030. Industrials: 250C, 260C, 340, 340A, 340B, 345C, 345D, 420, 445A, 445C, 515, 532, 535, 540, 540A, 540B, 545, 545A Replaces E0NN7563BA, 82006027. (Part No: C5NN7563AC)$174.08

Clutch Cross Shaft - This Clutch Cross Shaft is used in Ford 9N, 2N and 8N Tractors. Replaces original part number B7510A2 (Part No: B7510A2)$30.96

Clutch Disc - Clutch Disc, 11 inch, 15-Spline, 1 inch Hub. For 4100, 4110, 4200, 4410. (Part No: C7NN7550AA)$71.86

Clutch Disc - Clutch Disc, 13 inches, 10-spline, 1-3 4 inches hub, 9 pads. For tractor models 8000, 8700, 9000, 9700. (Part No: D1NN7550C)$83.26

Clutch Disc - Clutch Disc, 12 inch, 25-spline, 1 -5 8 inch hub, woven facing. For 5000, 5600, 5700, 6600, 6700. Replaces 82006021, E3NN7550EA, F0NN7550HA, 8186649, 83944006. (Part No: E3NN7550EA)$52.99

Clutch Disc - Clutch Disc, 12 inch, 10-spline, 1-3 4 inch hub. For 5000, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710. (Part No: E7NN7550DA)$55.07

Clutch Disc - Clutch Disc, 13 inch, 10-spline, 1-3 4 inch hub, with Damper Springs. For 5600, 5610S, 5610, 5700, 6600, 6610S, 6610, 6700, 6710, 7000, 7600, 7610S, 7610, 7700, 7710, 7810S. Replaces E3NN7550DA, D9NN7550AB, E7NN7550EA, E9NN7550BA, 82001667, 82004599, D2NN7550C, D9NN7550AA, D9NN7550AB, E3NN7550DA, E7NN7550EA, E9NN7550BA (Part No: E7NN7550EA)$53.52

Clutch Disc - Clutch Disc, 13 inch Heavy-Duty Clutch, 25-spline, 1-5 8 inch hub. For 5000, 5100, 5200, 6600, 6700, 7000, 7100, 7200. (Part No: E8NN7550KA)$71.41

Clutch Disc - Dual clutch, 8-1 2 inch, 15 16 inch, 10 spline, rigid woven disc. For tractor models 1310, 1320, 1510, 1520, 1530, 1630, 1710, 1715, TC27D, 23-66. (Part No: SBA320400492)$140.40

Clutch Disc - 13 inch, 10 Spline, 1 inch Hub, Woven Disc, Dampened Disc. Tractors: 2810, 2910 (5 83 -2 90), 3230 (3 90-), 3430 (3 90-), 3630 (3 90-), 3910, 3930 (5 83-2 90), 4110, 4130, 4330, 4340, 4610 (5 83-2-90), 4630, 4830 (3 90-), 5030 (7 90-). Replaces E5NN7550AA. (Part No: E7NN7550BA)$61.39

Clutch Disc - 13 inch, 25 spline, 1-5 8 inch hub, rigid woven disc. Tractors: 5000, 5200, 5340 (1 1965-9 1969) less dual power, 5700 (1 1975-) less dual power, 6600, 6700 (10 1975-10 1981) less dual power, 7000, 7100, 7600, 7700 (10 1971-9 1975) less dual power. Replaces 82006014, 81866446, 83919288, D9NN7550CA, D2NN7550A, C5NN7550AV, 82445216, 87295811, F0NN7550AA. (Part No: 3919288)$51.75

Clutch Disc - 13 inch, 10 spline, 1-3 4 inch hub, rigid woven disc. Tractors: 5000 (1 1965-9 1969) Dual power, 5110 (1 981-12 1992) Dual power, 5200, 5340 (1 1965-9 1969) Dual power, 5640 (11 1991-), 5700 (1 1975-) Dual power, 6410 (1 1981-12 1992), 6600, 6700 (10 1975-10 1981) Dual power, 6610 (1 1981-) Dual power, 6640 (11 1991-), 6710 (1 1981-) Dual power, 7000 (10 1971-9 1975) Dual power, 7100, 7200 (10 1971-9 1975) Dual power, 7600, 7700 (10 1971-9 1975) Dual power, 8010, 8210 (4 1996-), TS90, TS100, TS110 (11 1997-). (Part No: 82011594)$81.94

Clutch Disc - 13 inch, 10 spline, 1-3 4 inch hub, 6 pad, dampened disc. Tractors: 5610 (1 81-), 5640 (11 91-), 6610 (1 81-) Dual power, 6640 (11 91), 7100, 7200 (10 71-9 75) Dual power, 7600, 7700 (10 71-9 75) Dual power, 7610, 7710 (1 81-) Dual power, 7740, 7840 (11 91-), 7810, 7910 (10 85-3 88), 8010, 8210 (4 96-), 8340 (11 91-), TS90, TS100, TS110 (11 97-). (Part No: E8NN7550PA)$195.96

Clutch Disc - This Clutch Disc is 8 3 8 diameter, 10 spline on a 15 16 inch hub. For Ford 1000, 1310, 1320, 1500, 1510, 1520, 1530, 1620, 1630, 1700, 1710, 1715, 1900. (Part No: SBA320400212)$91.79

Clutch Disc - 7 1 8, 10 spline, 15 16 hub, with springs. For model 1300 (Part No: SBA320400021)$100.04

Clutch Disc - This disc is used with single clutch systems. It is 8.810 inches in diameter with a 1.182 inch, 16 spline hub. This is a rigid (no spring) replacement. It replaces SBA320400432, SBA320400431, SBA320400430, 83970520, 83966149 (Part No: SBA320400433)$33.36

Clutch Disc - This is the PTO disc used on a Ford 1920 with a dual clutch. It is 9 1 2 Inches in Diameter with a 3 4 inch, 14 spline center. It replaces SBA3200400402, SBA3200400403, SBA3200400404 (Part No: SBA320400403)$34.29

Clutch Disc - This is the Transmission (Captive) Disc use on a Ford 1920 with a Dual Clutch. It is 9.50 inches in Diameter with a 1.187 inch, 16 spline center hub. This is a rigid fiber disc. It replaces original part number SBA320400392, SBA320400391, 83970019, 83986716, 83969143 (Part No: SBA320400393)$34.29

Clutch Disc - This is a 9.44 Inch with a 13 spline 0.938 inch diameter hub center. It is used on Ford New Holland, 1910 and 2110 compact tractors. It replaces SBA320400441, SBA320400440, SBA320400230, SBA320400150, SBA320040670, 83967185, SBA320040210, 83939662, SBA320040370, 83967990 (Part No: SBA320400442)$34.20

Clutch Disc - This clutch disc is solid, organic, measures 11.811 diameter, has a 10 splined hub that measures 1.375. Replaces E1ADKN7550D, 81805300, SW00331, SW01848. For models Major, Super Major and Power Major (Part No: E1ADDN7550C)$154.50

Clutch Disc - Clutch disk measuring 9 inches with a 1 3 8 inch hub and 10 splines. This is a 6 spring clutch. Fits tractor models 8N, 9N, 2N, NAA (4 speed), NAB, 600, 700, 800, 900 (to serial number 14257), 1800, 2130. Improved from original by added springs. Also replaces 84365150, 91A7550, NAA7550A. (Part No: 91A7550WHD)$27.00

Clutch Disc - This 10 inch clutch disc fits tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 800, 900 (4 speed to serial number 14257). 10 Spline x 1 3 8 inch hub. This is a retrofit for 9 inch clutch, must use 10 inch pressure plate and flywheel. (Part No: NCA7550A)$20.54

Clutch Disc - For tractor models Dexta, Super Dexta. 11 inch disc, 1 inch X 15 spline. (19528S) (Part No: F0NN7550CA)$61.41

Clutch Disc - For tractor models: Fordson Major, Power Major, Super Major. 11 inch Clutch disc, 1-3 8 inch, 10 spline. (72736S) (Part No: D8NN7550DA)$64.97

Clutch Disc, 10 inch - New, Organic, Spring Loaded, 15 Spline, 1 inch Hub. For tractor models 1801, 1821, 1841, (2000 4 cylinder), 2031, 2111, (2130, 2131 1958 and up), (4000 1962-1964 4 cylinder single clutch), 4031, 501, (600 single clutch), 601, 700, 701, 800, (900 single clutch), 901. Replaces E8NN7550FA, NDA7550B (Part No: NDA7550B)$36.10

Clutch Disc 10 Inch - Clutch Disc, 10 inch Organic, 10 spline on 1.375 inch hub, Spring Loaded. For 1801, 1821, 1841, 2130, NAA, Jubilee, NAA, NAB, 2110, 2120, 2131, 4120, 4121, 4130, 4131, 4140, 541, 601, 620, 621, 630, 631 (Part No: 313299)$96.38

Clutch Disc, 10 inch, Single Stage, New - Kit includes pressure plate, woven clutch disc, & bearings. For tractor models 1800, 1801, 1821. (Part No: FND63AK)$155.36

Clutch Disc, 11 inch - Torsion Dampened, Organic, 1 inch Spline Diameter, 10 Spline. For tractor models 2000, 2100, 2110, 2300, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 333, 335, 3400, 3500, 3600, 3610, 3910, 4000, 4200, 4400, 4410, 4600. (Part No: 328015716)$43.87

Clutch Disc, 11 inch - NEW, 1 inch Spline Diameter, 10 Spline, Organic, Spring Loaded. For tractor models (2000, 2100, 2110 with Independent PTO), (2120, 2150 with 3 cylinder and Independent PTO), (3610 from 10 1981 to 12 1984 with Dual Clutch), (4000 with 3 cylinder and Independent PTO from 1965 to 9 1969 or 1965 to 9 1975 with Dual Clutch), (4100, 4200 from 1965 to 9 1969 with Independent PTO). (Part No: E5NN7550BB-RO)$71.98

Clutch Disc, 11 Inch - 10-Spline, 1 inch Hub, Button Pad Type Facing. For tractor models 2000, 3000, 4000, 4110. (Part No: C7NN7550AC)$70.00

Clutch Disc, 11 Inch - 15-Spline, 1 inch Hub, Woven Facing. For Tractors including: (2000 and 3000 1965 to 9-1969) Replaces C7NN7550C. Models with 7 and 8 speed transmissions and PTO. Also fits the following models (less PTO): (4100, 4110, 4200 1965 to 9-1969), (4100 10-1971 and up). 83971425, C7NN7550V, E8NN7550BA, C7NN7550B (Part No: C7NN7550V)$44.33

Clutch Disc, 11 Inch - 10-Spline, 1 inch Hub, Woven Facing. For 2000, 2600, 2610, 3000, 3600, 3610, 3900, 4000, 4100, 4110, 4600. Replaces 82006626, 87295808, D1NN7550A, E5NN7550BA, E5NN7550BB. (Part No: D1NN7550A)$39.30

Clutch Disc, 11 Inch - This is a Rigid Disc, no Springs. It is 11 inch, 15 Spline, 1 inch Hub, Rigid Disc, Fiber type material. Replaces E8NN7550BA, C7NN7550V, 328024710, 3280247101. (Part No: 328024710)$37.49

Clutch Disc, 12 Inch - This Transmission Clutch Disc is 12 inch organic, spring loaded. It has a 1 inch, 15 spline Hub. Used on some of the following built from 1965 through 9 01 1969: 3400, 3500, 4330, 4340, 4410 (Part No: E8NN7550EA)$133.17

Clutch Disc, 13 Inch - Clutch Disc, 13 inch, 10-spline, 1 inch Hub, no Damper Springs. For 2810, 2910, 335, 3550, 3910, 4110, 420, 4400, 4410, 4500, 4600, 4610, 515, 532, 535. Replaces D1NN7550B, E3NN7550BA, VPG2204, 333008810, 3554214, 81825076, 82006015, 83937180, 1112-6025, 81866447, 87295809. (Part No: F0NN7550BA)$55.07

Clutch Disc, 13 Inch - This 13 Inch Clutch Disc has a 1 inch, 15 spline hub. It is used on Ford 3400, 3500, 4400, 4330 and 4340 Tractors all 1 1965- 9 1969 with Trans PTO. Replaces FC750Y, C7NN7550Y. (Part No: E8NN7550JA)$132.14

Clutch Disc 14 Inch - This is a 14 inch, Ceramic 7 Button Disc. It has a 1-3 4 inch, 10 spline center. Used on Ford New Holland: TB100, TB110, TB120, TB80, TB85, TB90, (5610S 4 2002 and later), (6610S 4 2002 and later), 6810S, 7610S. Replaces 82983565 (Part No: 82983565)$216.47

Clutch Disc, 9 inch - Clutch Disc: 9 inch Organic, Spring Loaded, 15 Splines, 1 inch Hub. Replaces E8NN7550GA, C0NN7550B, C0NN7550A. (Part No: E8NN7550GA)$35.19

Clutch Fork To Cross Shaft Pin - This Clutch Fork to cross shaft pin is 5 16 inch X 1 1 2 inches. It is used on Ford Tractors built between 1939 and 1964. Replaces 352581S8, 352581-S8, 352581S. (Part No: 352581S8)$1.50

Clutch Kit - New heavy duty DUAL clutch. Includes: SBA320040484 Pressure plate assembly, (9", 16 spline, 30mm hub, woven disc.), SBA320400384 Heavy duty disc (9", 14 spline, 19mm hub, woven disc), SBA398560340 Release bearing, SBA040116001 Pilot bearing. Additional $20.00 shipping due to weight (50 lbs). IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Fits compact tractors: 1720. (Part No: SBA320040483K)$302.75

Clutch Kit - This single stage clutch kit contains a 11 inch, 10 spline rigid drive clutch disc (87295808), a 11 inch single pressure plate with six bolt mount, (used 1969 and later)(C9NN7563D), a pilot bearing which measures 1.575 inches OD, .669 inch ID, .472 inches wide (C5NN7600A), new release bearing which measures 4.0700 inches outside diameter, 2.4997 inches inside diameter, 0.8700 inches wide (83914247), and clutch alignment tool. **NOTE** Some tractors use a release bearing which measures 2.0625 inches inside diameter, 3.515 inches outside diameter and .840 inches in width. If you need this smaller bearing, also order part number N1087. For tractor models 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 334, 335, 345C, 345D, 3600, 3600V, 3610, 3900, 4110, 4140, 4190, 4330, 4340, 4400, 4410, 445C, 445D, 4500, 4600, 4600SU, 4610, 5000, 5190, 530A, 5340, 545C, 545D. (Part No: D0NN7563A-KIT)$180.91

Clutch Kit - This new heavy duty single stage clutch kit contains a new 8 1 2 inch single pressure plate assembly (SBA320450011), a new 8 1 2 inch 10 spline, 24 mm (0.944882 inch) hub, woven clutch disc (83986703), new release bearing, 2.88 inches outside diameter x 1.77 inches inside diameter x .31 inch wide (SBA398560120), new pilot bearing, 1.10 inches outside diameter x .472 inch inside diameter X .31 inch wide (SBA040116001), and clutch alignment tool. For tractor models 23-66, 1000, 1310, 1320, 1500, 1510, 1520, SBA040116001 1530, 1620, 1630, 1700, 1710, 1715, 1900. (Part No: SBA320450011K)$101.26

Clutch Kit - This new single stage clutch kit contains a new 13 inch pressure plate assembly with a 2.5 inch hub (D8NN7563AB), a new 13 inch, 25 spline, 1.625 inch hub, rigid drive disc (D2NN7550A), new release bearing (83914247), new pilot bearing (F0NNN779AA), and a clutch alignment tool. Fits Tractors 4600, 4600NO, 4600SU, 5000, 5100, 5190, 5200, 5340, 5600, 5610, 5610S, 5700, 6410, 6600, 6600C, 6610, 6610S, 6700, 6810S, 7000, 7010, 7100, 7200, 7600, 7600C, 7610, 7610O, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210, 9610. (Part No: FD13P25RD)$250.01

Clutch Kit - This new double clutch kit contains a new 11 inch, 15 Spline Rigid Drive Disc E8NN7550BA. A new 11 inch, 29 Spline Double Pressure Plate D8NN7502AA. Pilot Bearing C5NN7600A and Release Bearing 83914247. Includes Pilot Tool. For tractor models (2000, 2100, 2110, 2310 3 cylinder dual clutch), 2120, 2150, 231, 234, 530A, 531, (230A, 233, 333 dual clutch), (2310, 2600, 2600N, 2610 1981-Dec 1984 dual clutch), (3000, 3100, 3400, 4000, 4110 1965-Sept 1975 dual clutch), (3120, 3150, 3190, 3300, 3310, 3330 Jan 1965-Dec 1974), 3600 Oct 1975 and up dual clutch, 3610 Oct 1981-Dec 1984 dual clutch. (Part No: D8NN7502AA)$329.31

Clutch Kit - Complete Kit includes 13 inch disc, pressure plate, release bearing, pilot bearing and alignment tool. For tractor models 5110, 5610, 5640, 6410, 6610, 6640, 6710, 6810, 7610, 7710, 7740, 7840, 8240, 8340, 8530, TS100, TS110, TS90, TW5. Replaces OEM 82006010 and 82011590. (Part No: 1112-6145)$356.38

Clutch Kit - This new dual stage, 9 inch clutch kit contains a 9 inch, 15 Spline Drive Disc with 29 Spline Double Pressure Plate Assembly (311435). Includes Pilot Bearing (C5NN7600A) and Release Bearing (83914247). The pressure plate assembly is larger than the 9 inch captive discs. Note: Pilot Tool is not included and not needed in this kit. For live PTO Double Clutch Models (1955 to 1964). This clutch kit is used on tractor models: 600, 700, 800, 900, 2000 4 cylinder, 4000 4 cylinder, Dexta, Super Dexta. (Part No: 311435K_)$378.45

Clutch Kit - The Clutch Kit contains a 14 Inch Pressure Plate part number E5NN7563AA, a 14 Inch Transmission Disc number E5NN7550CA-8, a Release Bearing number N1585 and a Pilot Bearing Number 6108. The Pressure Plate is 3 Lever with a 2.048 Inch Flywheel Step. The Disc is an 8 Button Type, 10 Spline and is Spring Loaded. For Models TW15, TW20, TW25, TW30, 8630, 8730, 8830. (Part No: CLK101)$706.26

Clutch Kit - This new single stage clutch kit contains a 13 inch, 4 finger pressure plate assembly (D8NN7563BA), a new 13 inch, 10 spline, 1 3 4 inch hub, 6 button clutch disc (82011591), new release bearing (N1585), and new pilot bearing(6108). For Models 8400, TW10, TW5, 7910, 8000, 8200, 8210, 8530, 8600, 8700, 9000, 9200, 9600, 9700. (Part No: CLK107)$492.33

Clutch Kit - This new IPTO clutch kit contains a new 11 inch, 15 spline rigid drive disc (E8NN7550BA), a new 11 inch, 29 spline IPTO pressure plate assembly (C5NN7563U), a new pilot bearing (C5NN7600A), new release bearing (83914247), and clutch alignment tool. For tractors 4000 Series 3 Cyl 65-74, 4100, 4140, 4200, 4600, 4600SU. (Part No: C5NN7563UKIT15)$186.70

Clutch Kit 10 Inch - This 10 inch Single Clutch Kit has a 10 inch 10 Spline on a 1 3 8 inch hub Spring Drive Disc NCA7550A, 10 inch Single Pressure plate NDA7563A, Pilot Bearing C5NN7600A and Release Bearing C0NN7580A. Includes Pilot Tool. This clutch kit is for tractor models with a 4 or 5 speed transmission. Tractor models: 600, 601, 700, 800, 900 (1953 to 1957). Fingers do not have counter-weights. (Part No: 1112-5987)$143.82

Clutch Kit, 10 Inch, Single Clutch - This 10 inch Single Clutch Kit has a 10 inch 15 Spline on a 1 inch hub Spring Drive Disc E8NN7550FA, 10 inch Single Pressure plate NDA7563A, Pilot Bearing C5NN7600A and Release Bearing C0NN7580A. Includes Pilot Tool. This clutch kit is for tractor models with a 4 or 5 speed transmission. Tractor models: 600, 601, 700, 800, 900, 1841, 2000, 4000 (1953 to 1957). Fingers do not have counter-weights. (Part No: NDA7563AK)$122.96

Clutch Kit, 10 SPLINE DISC - This new complete clutch kit includes: a 12 inch, 10 spline, with 1.75 inch hub, rigid clutch disc (E7NN7550DA), a 12 inch, 4 finger pressure plate (86634458), a sealed type release bearing that measures 2.49 inch inside diameter, 4.06 inch outside diameter, .87 inch width (83914247), a pilot bearing that measures 1.43 inch inside diameter, 2.68 inch outside diameter, .59 inch width (F0NNN779AA) and clutch alignment tool. For models: 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700. (Part No: E0NN7550DA)$223.15

Clutch Kit, 11 Inch IPTO - Kit contains 11" 10 spline four pad ceramic disc. (Note, this replaces a three pad triangular type drive disc) C7NN7550AC, 11" 29 spline IPTO hub pressure plate with four finger design that will also replace three finger type with six (6) bolt mounting design D8NN7563DB, release bearing 83914247, pilot bearing C5NN7600A, and 1" by 10 spline and 1-7 8" by 29 spline pilot tool. (Part No: 1112-6113)$209.76

Clutch Kit, 11 Inch IPTO - Kit contains 11" 10 spline four ceramic pad disc, (Note, this replaces three pad triangular type drive disc) C7NN7550AC, 11" 29 spline IPTO hub pressure plate with four finger design that will also replace three finger type with six (6) bolt mounting design D8NN7563DB, release bearing 83914247, pilot bearing C5NN7600A, and 1" by 10 spline and 1-7 8" by 29 spline pilot tool. (Part No: 1112-6113)$209.76

Clutch Kit, 11 Inch IPTO - Kit contains 11 inch - 10 spline rigid drive disc with 1 inch center (82006626), 11 inch - 29 spline IPTO pressure plate (C5NN7563U) with 8 bolt mount pattern, pilot bearing C5NN7600A and release bearing 83914247, includes pilot tool. Replaces 82006626, C5NN7563U, E5NN7550BB. (Part No: 1112-6067)$172.02

Clutch Kit, 11 Single - This Clutch Kit contains 11 inch 15 spline spring drive disc E8NN7550AA, 11 inch single pressure plate C9NN7563D, pilot bearing C5NN7600A and release bearing 83914247, includes pilot tool. Used on some Ford tractors 1965 and later. (Part No: FC563ZNKIT)$176.16

Clutch Kit, 13 Inch Single - This Kit contains 13 inch - 10 spline spring drive disc with 1 3 4" hub 82011593, 13" single pressure plate w ring D8NN7563AB, pilot bearing F0NNN779AA and release bearing 83914247, includes pilot tool. Replaces 82006046, 82011593, D8NN7563AB Additional $10.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 11126087)$247.22

Clutch Kit, 13 Inch Single - This Kit contains 13 inch - 10 spline spring drive disc with 1 3 4" hub 82011593, 13" single pressure plate w ring D8NN7563AB, pilot bearing F0NNN779AA and release bearing 83914247, includes pilot tool. Replaces 82006046, 82011593, D8NN7563AB Additional $10.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 11126087)$247.22

Clutch Kit, 25 SPLINE DISC - This new complete clutch kit includes: a new 12 inch, 4 finger pressure plate (86634458). A 12 inch, 25 spline, 1 5 8 inch hub rigid disc (C7NN7550Z). A new release bearing which measures 2.49 inch inside diameter, 4.06 inch outside diameter, .82 inch width (83914247), pilot bearing measures 1.43 inch inside diameter, 2.68 inch outside diameter, .59 inch width (F0NNN779AA) and clutch alignment tool. For tractor models 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700. (Part No: E0NN7563CA-KITA)$209.32

Clutch Kit, 25 SPLINE DISC - Complete Kit is the same description as E0NN7563CA-KITA except Disc has springs not rigid. Disk, 12 inch, 25 spline SPRING disc, 1 5 8 inch hub, pressure plate is 4 finger, release bearing measures 2.49 inch inside diameter, 4.06 inch outside diameter, .82 inch width, pilot bearing measures 1.43 inch inside diameter, 2.68 inch outside diameter, .59 inch width and alignment tool. For tractor models 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700. (Part No: E7NN7550DA-KIT)$212.78

Clutch Kit, 8-1/2 - New heavy duty DUAL clutch. Kit contains SBA320040341 8.5 inch double clutch with 19 spline 1 3 8 inch center hub, 83986703 drive disc, 8 1 2 inch diameter by 10 spline with 15 16 inch center hub, SBA398560340 release bearing outside diameter 3.47 inch by inside diameter 2.16 inch by width of .766 inch, SBA040116001 pilot bearing 1.10 inch outside diameter by .472 inch inside diameter by .472 inch width pilot tool, .468 inch pilot, 10 spline, for 15 16 inch hub drive disc, 19 spline 1 3 8 inch on hub for PTO disc. Fits compact tractors: 1310, 1510, 1710, TC27D. (Part No: SBA320040341K)$205.20

Clutch Kit, 9 - This new heavy duty DUAL clutch kit includes: Pressure plate assembly, (9 inch, 19 spline, 36mm hub, woven disc.). Heavy duty disc (9 inch, 13 spline, 25mm hub, woven disc). Release bearing, pilot bearing. Comes with alignment tool. Fits compact tractors: 1500, 1700, 1900. Additional $10.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces SBA320040110. (Part No: SBA320040110K)$217.07

Clutch Kit, 9 Inch, Single Clutch - This 9 inch Clutch Kit contains 10 spline spring drive disc part number NAA7550A, 9 inch single pressure plate part number 8N7563, pilot bearing part number C5NN7600A, release bearing part number C0NN7580A and alignment tool. This clutch kit is for tractor models 1800, 1801, 2000 (4 cylinder 1962-1964), 2031, 2110TR, 2120, 2130, 2131, 4000 (4 cylinder 1962-1964), 4031, 4110TR, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, NAB. (Part No: 8N7563K)$95.88

Clutch Kit NEW - This new dual clutch kit contains a new 11 inch (280 mm) dual IPTO with 6 lever pressure plate assembly fitting a 9 or 12 bolt flywheel, a 11 inch (280 mm), 10 spline, 0.984 inch (25 mm) hub, rigid woven PTO disc, new transmission release bearing, PTO release bearing and pilot bearing. Tractors: 3010S, 4010S, 4030 Orchard, 4230, 4330V, 4430, 5010S, 5530, 5610S, 6530, 6610S, TT55, TT65, TT75. (Part No: 5171137KT)$476.49

Clutch Kit - Single - This new complete clutch kit (for flat flywheel step) contains: a 13 inch single pressure plate, with ring (D8NN7563AB), 13 inch 10 spline rigid 1.75 inch hub disc (82011593), a pilot bearing that measures 1.437 inch inside diameter, 2.6772 inch outside diameter, .59 inch wide (F0NNN779AA), a release bearing that measures 2.5 inch inside diameter, 4.125 inch outside diameter, .870 inch wide (83914247), and clutch alignment tool. For tractor models: 4600, 4600SU, 5000, 5110, 5190, 5340, 5600, 5610, 5610S, 5700, 6410, 6600, 6610, 6610S, 6700, 6710, 6810, 6810S, 7000, 7010, 7600, 7610, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210. (Part No: D8NN7563AB-KIT)$241.06

Clutch Master Cylinder - For 5640, 6640, 7740, 7840, 8240, 8340. Replaces 81867084, F0NN7A543AB. (Part No: F0NN71543AB)$116.02

Clutch Master Cylinder Repair Kit - For tractor models 5640, 6640, 7740, 7840, 8240, (8340 with 12 x 12 trans), (TS90, TS100, TS110 1 1997 and up). Replaces 81869662, 81873179, 81873388, F1NN2R169AA, F1NN7578AA, FP574. (Part No: 81873388)$57.27

Clutch Pack Housing - This Clutch Pack Housing comes without clutches. It replaces original part numbers 83931457, D0NN7R036A, D0NN7R036B, D2NN7R036A, D2NN7R036B, D3NN7R036A, D5NN7R036A, D5NN7R036B, D6NN7R036A, D8NN7R036AA, E0NN7R036AA, E0NN7R036AB. (Part No: E0NN7R036AB-B)$394.50

Clutch Pedal Arm Bushing - For tractor models: 8N, Jubilee, NAA, (1948-1954). This bushing is 1.002 inch inside diameter x 1-1 2 inches long. Minimum Order Qty is 2. (Part No: 8N7508B)$4.95

Clutch Pedal Bushing - 1 inch inside diameter. For 9N, 2N 1939-1947. Clutch Pedal Bushing. Replaces original part number 9N7508. (Part No: 9N7508)$7.43

Clutch Pedal Return Spring - This Clutch Pedal Return Spring is used on multiple Ford New Holland Tractors and Industrial Models, build 1965 and later. It replaces original part numbers C7NN7N598A and 81820895 (Part No: C7NN7N598A)$5.04

Clutch Pedal Return Spring - This Clutch Pedal Return Spring is used on multiple Ford New Holland Tractors and Industrial Models, build 1965 and later. It replaces original part numbers C7NN7N598A and 81820895 (Part No: C7NN7N598A)$5.04

Clutch Pedal Return Spring - This Clutch Pedal Return Spring is used on multiple Ford New Holland Tractors and Industrial Models, build 1965 and later. It replaces original part numbers C7NN7N598A and 81820895 (Part No: C7NN7N598A)$5.04

Clutch Plate - Pressure Plate Assembly, 11 inch. 1.875 inch 29 spline center. Replaces D8NN7563DA, C9NN7563F, C7NN7563J. (Part No: D8NN7563DB)$126.16

CLUTCH, PRESSURE PLATE - Pressure Plate (7 1 4 inch) Diaphram Type. For model 1120, 1220, 1300. Replaces SBA320450020, SBA320450160 (Part No: S.72822_)$43.99

Clutch PTO Disc - This PTO disc measures 9.5 inches, has 19 splines on a 1.38 inch hub, and is a solid disc. For models 1910 and 2110. Replaces 83939664, SBA320400160 (Part No: SBA320400160)$34.20

Clutch Release Arm Kit - This clutch release arm kit is for tractors 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). Clutch Release Arm kit contains: eyebolt part number 355584S8, pin part number 8N7533 and clutch release arm part number 8N7511B. (Part No: S.66657)$54.45

Clutch Release Bearing Hub - For tractor models 5000, 5600, 5700, 6600, 6700 all with Single Clutch. (Part No: C5NN7571H)$38.09

Clutch Release Fork - This Clutch Release Fork is used in Ford Tractors with 5 speed transmissions and live PTO. 1958-1964 (Part No: 311649)$101.91

Clutch Release Shaft Fork - This Clutch Release Shaft Fork is used on Ford Tractors 1939 - 1954. Replaces original part number 487515, 48-7515. For models 9N, 2N, 8N, NAA and Jubilee. NOTE: This part is not made to OEM standards, and may require the bored holes to be honed slightly to fit. Unfortunately, we do not have a higher quality part available. (Part No: 487515)$19.95

Clutch Shaft Bushing - This clutch shaft bushing measures1.50 inches long, 1.2 inch outside diameter, 1.13 inch inside diameter. For tractor models 2000, 2100, 2600, 3000, 3100, 335, 340, 3400, 3500, 3550, 3600, 4100, 420, 4200, 4400, 4410, 445, 4500, 4610, 5000, 5100, 5200, 535, 540, 545, 550, 555, 5600, 6600, 6700, 7100, 7200, 7600, 7700, 8000, 8700, 9000, 9700, TW10, TW20, TW30. (Part No: C5NN7A615A)$8.13

Clutch Shaft Bushing - This clutch shaft bearing has a 7 8 inch inside diameter. This clutch shaft bushing is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Transmission only). (Part No: 407508A)$6.15

Dual Clutch Kit - Used on Ford 1920 tractors, with 9 1 2 dual clutch assemblies, this kit includes SBA320040615 pressure plate, SBA320400403 PTO disc, SBA320400393 transmission disc (captive in the pressure plate assembly), SBA040116001 pilot bearing, and SBA398560340 release bearing. (Part No: FD320614N_KIT)$498.76

Dual Clutch Kit with 10 spline RIGID disc - This new dual stage clutch kit contains a new 11 inch, 3 lever dual pressure plate assembly (D8NN7502AA), a new 11 inch 10 spline RIGID type clutch disc (E8NN7550HA), new release bearing, new pilot bearing and clutch alignment tool. For 3-cylinder tractors: 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. VERIFY DISC TYPE BEFORE ORDERING. Note: Includes PTO Disc. (Part No: 1112-6089)$370.04

Dual Clutch Kit with 10 spline SPRING disc - Kit contains 11 inch, 10 Spline 1 inch hub, Spring Drive Disc E8NN7550HA. 8 1 2 inch 29 Spline, 1 7 8 inch hub PTO Disc in Double Pressure Plate D8NN7502AA. Pilot and Release Bearings. Includes Pilot Tool. For 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. VERIFY DISC TYPE BEFORE ORDERING. Additional $20.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1112-6075)$355.53

Dual Clutch Kit with 15 spline Spring disc - This Clutch Kit includes NEW parts: D8NN7502AA Pressure Plate is 11 inches and 29 Spline, 3 lever. C7NN7550B Clutch Disc with Springs is 11 inches and 15 Spline on a 1 inch hub. Release and Pilot Bearings and Clutch Alignment Tool. For 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. (Part No: 1112-6061)$340.98

Dual Clutch Kit with Triangular disc - This new dual stage clutch kit includes a new 11 inch, 3 lever, 29 spline double pressure plate assembly (D8NN7502AA), a new 11 inch, 10 spline, triangular clutch disc (E8NN7550BA), new release bearing, new pilot bearing, and a clutch alignment tool. For 3-cylinder tractors: 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. VERIFY DISC TYPE BEFORE ORDERING. Note: PTO disc included. (Part No: 1112-6076)$386.10

Friction Disc - 5.85 inch outside diameter, 52 Teeth. For tractor models 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 4000 (1962-1964), 4110, 501, 541, 601, 611, 620, 621, 630, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 850, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981. (Part No: PBB77519A)$15.62

Friction Facing - Slip clutch disc, 2 required (6-1 2 inch outside diameter, 2 inch inside diameter). For tractor models 909, 910. (Part No: 202227)$9.51

Friction Plate - Clutch Friction Plate, 5-1 4 outside diameter, 45 Internal Splines. For tractor models 2000, 3000, 4110. (Part No: C0NN7B164A)$15.29

Friction Plate - Clutch friction plate, 5-1 4 inches outside diameter, 45 internal splines. For model 4000. (Part No: C5NNP743A)$12.77

Friction Plate - Clutch Friction Plate, 6 inch outside diameter, 4-1 2 inch inside diameter, 60 external splines. For 650, 6500, 750, 7500, 755, 755A, 755B. (Part No: D2NN7R174A)$7.26

Friction Plate - Clutch Friction Plate. For tractor models (3000, 4000 from 1 1965 and up), 4100, 4600. (Part No: C7NNP743B)$12.79

Friction Plate - Friction Plate, 5-7 16 inch outside diameter, 50 External Splines. For Hydraulic Shuttle Instant Reverse Clutch. 3500, 3550, 4400, 4500, 340, 340A, 340B, 420, 445, 445A, 455, 535, 540, 540A, 540B, 545, 545A, 555, 555A, 555B, 655, 655A. Replaces 1P77518A, 81808604. (Part No: 1754344M1)$11.64

Friction Plate - Friction Disc, 5-1 4 inch outside diameter, 45 Internal Splines. For Hydraulic Shuttle Instant Reverse Clutch. FORD 3500, 3550, 4400, 4500, 340, 340A, 340B, 420, 445, 445A, 455, 535, 540, 540A, 540B, 545, 545A, 555, 555A, 555B, 655, 655A. Replaces 85999292, 1754345M1, 1P77519A1, C0NN7B164A. (Part No: 2757328M1)$15.44

Friction Plate, Select-O-Speed #2 or #3 - For tractor models 4000, 4100, 4140, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200, 5340, 6000, 7000, 7100, 7200, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700. (Part No: C0NN7B455A)$53.54

Input Shaft Retainer - This Input Shaft Retainer fits the following Ford Tractor Models with live pto and double clutch and 5 speed transmission, serial number 14256 and up 1958-1964: 2000, 4000, 661, 861, and 961. It has a tube length of 2.105 inches and an overall length of 5.120 inches. Replaces part number 311261. (Part No: 311261)$102.81

Pilot Bearing - For tractor models 1800, 1801, 1821, 1841, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 335, 340, 3400, 340A, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3610, 3630, 3910, 3930, 4031, 4100. 4110, 4120, 4121, 4130, 4131, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 4500, 455, 4600, 4600O, 4600SU, 4610, 4610O, 4610SU, 4630, 4830, 4830N, 501, 515, 530A, 531, 532, 535, 540, 540B, 541, 545, 545A, 550, 555, 555A, 620, 621, 630, 640, 641, 650, 651, 655, 655A, 6710, 740, 741, 820, 821, 840, 841, 850, 851, 941, 950, 951. Replaces 81805417, B7600A3, C5NN7600A (Part No: C5NN7600A)$3.08

Pilot Bearing - For tractor models 4110, 4120, 4121, 4130, 4131, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 4500, 455, 4600, 4600O, 4600SU, 4610, 4610O, 4610SU, 4630, 4830, 4830N, 501, 515, 530A, 531, 532, 535, 540, 540B, 541, 545, 545A, 550, 555, 555A, 620, 621, 630, 640, 641, 650, 651, 655, 655A, 6710, 740, 741, 820, 821, 840, 841, 850, 851, 941, 950, 951. (Part No: C5NN7600A)$3.08

Pilot Bearing - Inside diameter .475 inch, outside diameter 1.102 inch, thickness .313 inch. For Shibaura compact Tractors: 1000, 1210, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1530, 1620, 1630, 1700, 1710, 1715, 1720, 1900, 1910, 1920, 1925 HST, 2110, 2120, TC27D, TC30D, 23-66, 28-66. (Part No: SBA040116001)$2.16

Pilot Bearing - This Pilot Bearing measures .669 inches inside diameter, 1.575 inches outside diameter and is .472 inches wide. For tractor models 8N, 9N, 2N, NAA, NAB, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: C5NN7600A)$3.08

Pilot Bearing - For Fordson Major, Power Major, Super Major. (Part No: E1ADKN7600A)$8.95

Pressure Plate - Pressure Plate Assembly, 11 inch. For models: 4000, 4100, 4140, 4200, 4600SU, 4600. (Part No: C5NN7563U)$109.63

Pressure Plate - Pressure plate assembly, 11 inch single clutch. For tractor models 2000, 3000. (Part No: C9NN7563D)$120.26

Pressure Plate - This 9 inch single pressure plate, flat flywheel type is for tractor models 1800, 2130, 8N, 9N, 2N, NAA, NAB, 600, 700, 800, 900 with a single clutch. (Part No: 8N7563)$90.95

Pressure Plate - 11 inch, 3 lever, open center. For single clutch Models: Dexta, Super Dexta, Major, Power Major. Replaces 957E7563B, E1ADKN7563A. (Part No: E1ADDN7563A)$200.38

Pressure Plate - 11 inch, 4 lever with 8 mounting holes. Tractors: 2000, 2100, 2110 (1965-9 1969), 2300, 3000, 3055 (1965-9 1969), 3100, 3110, 3120, 3190 (1965-9 1969), 3300, 3310, 3330 (1965-9 1969), 4000, 4100 (1965-9 1969), 4140 (10 1971-9 1975). (Part No: C5NN7563V)$106.81

Pressure Plate - 13 inch diaphragm For tractor models 5110, 5610, 6410, 6610, 6710, 6810, 7610, 7710. Also replaces 52001664, 82006009 and 82006025. (Part No: 82011590)$161.11

Pressure Plate - 1000, 1310, 1320, 1500, 1510, 1520, 1530, 1600, 1620, 1630, 1700, 1710, 1715, 1900 (Part No: SBA320450011)$60.13

Pressure Plate, 10 Inch, Single Clutch, New - This new 10 inch single clutch pressure plate is for tractor models 1800 series, (2000, 4000 4 cylinder 1962-1964), 2120, 2130, 4120, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, NAA, Jubilee. (Part No: B8NN7563A)$80.85

Pressure Plate, 13 - 4 lever, long style, heavy duty, with new cast plate. For tractor models 8000, 8100, 8200, 8210, 8400, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW5 all indep. PTO with or without dual power. Replaces D8NN7563BA, C9NN7563B, 133002010 (Part No: D8NN7563BA-RHN)$126.28

Pressure Plate and Cover - 11 inch Single Clutch. For tractor models (4000, 4100, 4110, 4200, 4410 all with transmission PTO or live PTO). (Part No: C5NN7563Z)$162.71

Pressure Plate Assembly - Pressure Plate Assembly, 11" single clutch. Ford New Holland Tractors: 2000 (3 cylinder), 2100, 2110, 2120, 2300, 2310, 3000, 3100, 3110, 3120, 3300, 3310, 3330, (10 1969 to 5 1971). Ford New Holland Industrials: 3400, 3500, 3550, 230A, 231, 233, 234, 333, 334, 335, 530A, 531 Replaces C9NN7563E, D0NN7563A, D0NN7563AGV, C9NN7563DGV, C9NN7563EGV (Part No: C9NN7563E)$119.95

Pressure Plate Assembly - Pressure Plate Assembly, 11 inch Single Clutch. For tractor models 2000, 233, 2600, 3000, 321, 3600, 5000. (Part No: D0NN7563A)$120.26

Pressure Plate Assembly - This is an 11 inch Double Clutch with a 29 Spline 8 1 2 inch PTO Disc with 1 7 8 inch hub, and a 1.750 inch Flywheel Step. It replaces part numbers 86634451, D8NN7502AA, D8NN7502BA, D8NNY502AA and 83939291. (Part No: D8NN7502BA)$291.41

Pressure Plate Assembly - This is a 9 Inch (8.82 inch diameter) Single Clutch Pressure Plate Assembly. It is used on Tractors with Hydrostat Transmission. Used on Ford New Holland 1720, 1925, Boomer 2030, Boomer 2035, T1510, T1520, T2210, T2220, TC30, TC31, TC33, TC34 (Part No: SBA320450230)$46.25

Pressure Plate Assembly - This is a 9 1 2 inch dual clutch assembly with a 1-3 16 inch, 16 spline transmission disc. PTO (outside) disc is not included. Replaces SBA320040614, SBA320040613, SBA320040612, SBA320040611, SBA320040610, 83986712, 87779327, 87761214, 83969105, 83968524 (Part No: SBA320040615)$457.92

Pressure Plate Assembly - This is an 11 inch, six (6) lever, organic facing material, for tractors with IPTO. PTO disc is 14 spline with 1.56 inch inside diameter. Used on Ford New Holland 3010S, 4010S, 4030, 4230, 4330V, 4430, 5010S, 5530, 5635, 6530, 6635, TD60D, TD70D, TD75D, TD80D, TD90D, TT55, TT65, TT75, TT75A. Replaces 5085402, 5154879, 5171137. (Part No: 5154879)$386.86

Pressure Plate Assembly, 12 Inch - The is a 12 inch Pressure Plate Assembly with 4 levers and bearing hanger. It is used on 3400, 3500, 4330, 4340 and 4410 tractors, 1965 through September 1969. Replaces original part number C5NN7563AB (Part No: C5NN7563AB)$149.69

Pressure Plate Assembly, 13 - 13 inch Single Clutch. For tractor models 5000, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: D8NN7563AB)$145.00

Pressure Plate Assembly, 13 Inch - This is a 13 inch pressed steel Pressure Plate Assembly, with release plate. It has a 57mm Release Lever Height. If you need 63mm Release Lever Height, also order F1815816 Shim Kit. Used on 335, 340, 3400, 340A, 340B, 3550, 420, 440, 4400, 445, 445A, 4500, 515, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 4330, 4340. Replaces C5NN7563AD, C5NN7N513A, E0NN7563AA, E0NN756AA, 83925714 (Part No: C5NN7563AD)$144.65

Pressure Plate Assembly, 14 Inch - This is a Single Clutch, 14 inch Pressure Plate Assembly. It has a 1.350 flywheel step. Used on Ford New Holland: TB100, TB110, TB120, TB80, TB85, TB90, (5610S 4 2002 and later), (6610S 4 2002 and later), 6810S, 7610S. (Part No: 82983566)$305.28

Pressure Plate Shim Kit - This Shim Kit contains (4) 0.090 inch thick shims. It is used with 13 inch pressure plates C5NN7563AD and C5NN7563AC when needed. Replaces C5NN7N596B. (Part No: F1815816)$12.80

Pressure Plate Shim Kit - Ford 5600, 5610, 5900, 6600, 6700 Pressure Plate Shim Kit. This is a 4 pack of .060 inch shims for 12 inch single clutch. Replaces E0NN7N596AA. (Part No: F1815815)$12.80

PTO Clutch Disc - PTO Disc 8-1 2 inch, 29-Spline, 1-7 8 inch hub. For tractor models (2000, 2100, 2110, 2120, 2150, 2310 3 cylinder dual clutch), (2300 vineyard), (230A, 231, 233, 234, 333, 531 dual clutch), (2310, 2600, 2600N, 2610 1981-12 1984 3 cylinder dual clutch), (3000, 3100, 3400, 4000, 4110 1965-12 1974 dual clutch), (3120, 3150, 3190, 3300, 3310, 3330, 1 1965-12 1974), (335 utility 10 1975-9 1978), 3500, 3550, (3600 10 1975 and up), 3600N Narrow, (3610 10 1981-12 1984), 3910, 4600, 4600O, 4600SU, 530A. (Part No: C5NN77641B)$24.68

PTO Disc - This PTO Disc is solid, organic, measures 12 inches in diameter, hub is 16 spline and 2.125 inches in diameter. Replaces E1ADDN7764, VPG002, 81808611 and SW01770. For models Major, Super Major and Power Major (Part No: E1ADDN77641)$115.87

PTO Disc - This PTO Disc is used as the captive disc inside the Pressure Plate Assembly. It is 8.480 inches in diameter, 19 count spline, 1.3125 inch spline diameter. Replaces SBA320400262, SBA320400261, SBA320400260, SBA320400290, 83938759, 83986709, 87761138 (Part No: SBA320400260)$33.81

Release Bearing - This clutch release bearing has an inside diameter of 2.4997 inches, an outside diameter of 4.0700 inches, and is 0.8700 inches wide. This release bearing is used in multiple Ford Tractors. Replaces original part numbers D8NN7580AA, D8NN7580BA, D8NN7580BB, E4NN7580AA, D8NN7580CA, C7NN7580A, 82010859, 83914247, 83933520, 83946908 and 86534551. (Part No: N1585)$24.60

Release Bearing - Clutch Release Bearing. Inside diameter 2.4997 inches, outside diameter 4.0700 inches, 0.8700 inches wide. This is used in multiple Ford Tractors. Replaces original part numbers NDA1585, NDA7580, NDA7580B, D8NN7580AA, D8NN7580BA, D8NN7580BB, E4NN7580AA, D8NN7580CA, C7NN7580A, 82010859, 83914247, 83933520, 83946908 and 86534551. (Part No: N1585)$24.60

Release Bearing - This Release Bearing measures 2.165 inches inside diameter, 3.448 inches outside diameter, .7696 inches width. Clutch release bearing. FITS 1310, 1320, 1510, 1520, 1530, 1630, 1710, 1715, 1720, 1900, 1920, 1920, 2110....ALL WITH DOUBLE CLUTCH. Replaces 83922741. Verify measurements. (Part No: SBA398560340)$21.66

Release Bearing - This Sealed Release Bearing measures Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. For tractor models 1800, 2130, 2131, (2600, 2600N, 2610 1981 to 12 1984), (3000, 3100 1965 to 9 1975), (3120, 3150, 3190, 3300, 3310 1 1965 to 12 1974), (Dexta, Super Dexta 1 1958 to 12 1964), Major, Power Major. Replaces 787580A8. (Part No: N1087)$20.33

Release Bearing - Inside diameter 1.496 inch, outside diameter 2.642 inch, thickness .640 inch. For tractor models 1210, 1220, 1300. (Part No: SBA398560110)$46.94

Release Bearing - Release bearing (single clutch), inside diameter 1.771 inch, outside diameter 2.900 inch, thickness .700 inch. For tractor models 1000, 1310, 1320, 1500, 1510, 1520, 1530, 1620, 1630, 1700, 1710, 1715, 1900, 2120, 23-66. (Part No: SBA398560120)$19.77

Release Bearing - This Clutch Release Bearing. Inside diameter 2.4997 inches, outside diameter 4.0700 inches, width 0.8700 inches. This is used in multiple Ford Tractors. Replaces original part numbers D8NN7580AA, D8NN7580BA, D8NN7580BB, E4NN7580AA, 82010859, 83914247, 83933520, 83946908, 86534551 and N3004. (Part No: N1585)$24.60

Release Bearing - This release bearing measures 3.831 inches outside diameter, 2.364 inches inside diameter and is .861 inches wide. For Models 2120 and 3415. (Part No: SBA398560930)$99.71

Release Bearing - This release bearing is for Ford Tractors with a 9 inch or 10 inch single clutch 1939 to 1964. It has an inside diameter of 2.0625 inches, an outside diameter of 3.515 inches, a width .7969 inches. It replaces 78-7580A, 787580A, 787580A8, C0NN7580A. (Part No: N1087)$20.33

Release Bearing and Hub - This is a Hydraulic Release Bearing and Carrier. It is used on 12 x 12 transmissions. Ford New Holland 5640, 6640, 7740, 7840, 7840O, 8240, 8340, T6010, T6020, T6030, T6050, TS100, TS100A, TS110, TS110A, TS115, TS115A, TS90. Replaces 47134440, 81864436, 82005471, F0NN7580AA, 510001920, AZ36461. (Part No: F0NN7580AA)$252.29

Release Bearing Carrier - Used on: TW10, TW5, 5000 (W Dual Power & 12" Clutch; 1973>), 5110 (1981> W Syncronized Transmission), 5610 (1985> W Syncronized Transmission), 6410 (1981> W Syncronized Transmission), 6610 (1981> W Syncronized Transmission), 6710 (1981> W Syncronized Transmission), 6810 (1981> W Syncronized Transmission), 7610 (1981> W Syncronized Transmission), 7710 (1981> W Syncronized Transmission), 7810 (10 1985> W Syncronized Transmission), 7910 (10 1985> W Syncronized Transmission), 8000, 8200, 8210 (10 1985> W Syncronized Transmission), 8400, 8530, 8600, 8700, 9000, 9200, 9600, 9700 Replaces D9NN7571AA, D8NN7571BA, D8NN7571AA, C9NN7571A, C7NN7503A, 8776010, 87767009, 83919107, 81820438, E1NN7571BA, 83927906 (Part No: E1NN7571BA)$109.02

Release Bearing, Clutch - Measures 1.770 inches inside diameter, 2.905 inches outside diameter, width 0.703 inches. Replaces SBA398560840. (Part No: 72098054)$21.06

Release Bearing Hub - Dimension A = 1.75 inches, B = 2.05 inches, C = 2.80 inches. Fits 601, 701, 801, 901, 2000, 4000. All up to 1965. 5 speed transmission with SINGLE clutch (serial number 14256 and greater). (Part No: 311259)$31.92

Release Bearing Hub - This release bearing hub is for tractor models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, Jubilee, NAB. (Part No: 9N7561)$42.74

Release Bearing Hub - Dimension A = 2.10 inches, B = 2.48 inches, C = 1.91 inches. For tractor models: 601, 701, 801, 901, 2000, 4000 (DOUBLE CLUTCH, serial number 14256 and up, 1965 and newer). For tractors with 5-speed transmission and double clutch. Replaces OEM number 311260, 86539876. (Part No: 311260)$36.92

Release Bearing Spring - This Release Bearing Spring measures .627 inch outside diameter, 4.875 inch overall length and .095 inch wide diameter. For tractor models 8N, 9N, 2N, NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 820, 900, 901, 1801, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2110, 2111, 2130, 2131, 4030, 4040, 4031, 4110, 4121, 4130, 4131, 4140. Two are used per tractor. Sold and priced each. (Part No: 9N7562)$3.95

Release Fork Shaft - This Release Fork Shaft is a Double Clutch Adjusting Bolt Type. The Bolt is not included. Used on (2000, 3000, 3400 1 1965-3 1968) (Part No: C5NN7503H)$133.99

Spring - Spring for Clutch and Brake Lever Assist. Tractors: 3550, 4000 (11 1972 and up), 5100, 7100 (1965 and up), 420, 515, 532, 535, 4600, 5600, 5700, 6600, 6700, 7600, 7700, (1975 to 1981). Price shown is for each, sold only in multiples of 2 items. (Part No: C5NN2472H)$3.44

Throw Out Bearing Carrier - This Throw Out Bearing Hub has 2.055 inch inside diameter. Replaces 83992559, E1NN7571CA, E1NN7571CB. Uses N1585 release bearing, not included. (Part No: E1NN7571CA)$63.90

Torque Limiter Clutch Disc, Select-O-Speed - 8 inches in diameter, 10 spline, 1.125 inch spline diameter. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500 all 1965 and up with Select-O-Speed Transmission. (Part No: D0NN7A539B)$260.10

Trans Disc - 8.5 inch disc with springs for tractor models 1000, 1600. (Part No: SBA320400010)$87.22

Trans. Disc, 13 - Spring Loaded, Organic, 1.750 inch Spline diameter, 10 Spline. For tractor models: 4830, 4830N, 5000, 5100, 5110, 5200, 5550, 5600, 5610, 5640, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8100, 8210, TS100, TS80, TS90. (Part No: 82011593)$104.62

 
Cooling System
Air Conditioning Compressor - This Air Conditioning Compressor comes complete with Clutch. Sanden Style. It mounts to the Side of Engine-Front. Used in production from 11 1 1991 to 3 31 1994 on Ford New Holland 5640, 6640, 7740, 7840, 8240, 8340. Replaces F0NN19D629AB, F0NN19D629AA. (Part No: F0NN19D629AB)$307.73

Alternator New With Pulley And Fan - NEW Alternator assembly, 12 volt, 37 amp. For skid loaders: L series with Motorola alternators. For L (Part No: 86520116)$255.36

Belt Tensioner - This Belt Tensioner is used on 2450 Windrower, 2550 Windrower, 5640, 6640, 6640O, 7740, 7740O, 7840, 7840O, 8240, 8340, HW300 Windrower, HW320 Windrower (Part No: 87801102)$23.03

Blower Motor - This Blower Motor is 4 wire, 12 volt 3 8 inch x 4 1 4 inch shaft, 3 speed, body length 4 1 8 inches, body diameter 3 1 2 inches. It is used on Ford New Holland 8400, 8530, 8600, 8630, 8700, 9200, 9600, 9700, 9710, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 230A, 2310, 233, 234, 2600, 2610, 2910, 335, 3600, 3610, 3910, 4610, 530A, 5600, 5700, 5900, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8730, 8830, 9000. Replaces D2NN19N581B, D5NN18527AA, D5NN18527AA, V103596, V18380, V35513. (Part No: 72162089)$104.92

Cooling Fan - 6 Blade - Used on Ford compacts: 1000, 1500 (10 1979 and later), 1600 (1 1974 and later), 1700 (1 1979 and later). This new 6 blade fan has a 12 inch diameter, 1.14 inch pilot hole, and 2.075 inch bolt hole circle. (Part No: SBA145306130)$33.03

Cooling Fan - 6 Blade - Our new 6 blade fan has a 12" diameter, 1.125" pilot hole, and 2.075" bolt hole circle. This fan fits the Ford New Holland Compact Tractor 1500 built between 1 1979- 9 1979. (Part No: SBA145306070)$33.88

Engine Block Heater, Perkins - 600 watt heater with adaptor and one foot cord. Fits Perkins Engines 3.152 with 1-1 4 inch core plug. (Part No: 19841A91)$57.84

Engine Block Heater - Thread in - This is a 400 watt thread in Engine Block Heater. It is used in some Ford Tractors, 1965-2 1969. Make sure Core Plug can be removed before ordering. (Part No: D8NN8B152AB)$53.05

Fan, 5 Blade - Measure before ordering. Many of the models listed used more than one size fan. This fan measures 16 inch diameter, 0.625 inch pilot hole, and a 1.75 inch bolt circle (around the perimeter). Used on Ford tractors 1955-1964: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4040, 4110TR, 4120, 4121, 4130, 4131, 4140, 500, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 800, 801, 900, 901 (Part No: F8JL8600CA)$188.15

Fan, 6 Blade - 14-1 4 inch diameter, 1-1 8 inch pilot hole, 1-1 2 inch center to center on mounting holes. For tractor models 1710, 2120. (Part No: SBA145306110)$32.08

Fan, 7 Blade - 13-1 2 inch diameter, 15 16 inch pilot hole, 1-1 8 inch center to center on mounting holes. For tractor models 1620, (1720 with tropical cooling). (Part No: SBA145306520)$52.61

Fan Belt - Narrow fan belt. For Major Diesels prior to 1965. (Part No: DKN8620C)$8.21

Fan Belt - Belt, Drive for Fan and Water Pump, 54 inches long. For tractor models 2000, 3000, 4000, 5000. Replaces D4NN10C318A, 86514618 (Part No: D4NN10C318A)$8.81

Fan Belt - For tractor models 8N, 9N, 2N EARLY with Front Mount Distributor. Length is 44 1 8 inches. Alternator Belt for those tractors using our 12 volt conversion kit. (Part No: 9N8620B3-SL)$5.00

Fan Belt - This fan belt fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Some of these tractors used more than one type of belt. Verify part number before ordering. (Part No: EAF8577A)$6.86

Fan Belt - Fits 2000, 3000, 4000, 5000. Industrials: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. Some of these tractors used more than one type of belt. Verify part number before ordering. 1 2 X 55.375 inches. (Part No: C9NN10C318B)$9.42

Fan Belt - This belt has a length of 44.25 inches, thickness measures 0.354 of an inch, and has a width measuring .531 of an inch. Fits Dexta, Super Dexta, Fordson Major, Power Major, Super Major. (Part No: E1ADKN8620C)$7.07

Fan Belt - Fits 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7000, 7600, 7700, 2610, 3610, 4110, 4610, 5610, 6610, 6710, 230A, 231, 334, 335, 420, 515, 530A, 531, 532, 535, 545D 650, 750, 755, 755A, 755B. Some of these tractors used more than one type of belt. Verify part number before ordering. 1 2 Inch (13 mm) x 55 7 16 Inches (1408 mm) raw edge v-belt. (Part No: D4NN10C318A)$8.81

Fan Belt - For tractor models 1510, 1710 both built between 1983 and 1987. 3 8 inch wide X 35 inches long. Wrapped Polyester Cord (Part No: SBA080109055)$13.70

Fan Belt - Measures 1 2 x 38.2 inches. For tractor models 1320, 1520, 1715, 1720, 1920, 3415 all built 1987 and later. (Part No: 86517954)$17.79

Fan Belt - This is a 17 32 inch X 44.27 inch V-Belt. It is used on some Ford Compact models: 1000 (11-74 79), 1500 (79 82), 1600 (11-74 79), 1700 (79 82), 1900 (79 82), 1910 (83 87), 2110 (83 87). Note that some of these models used more than one size belt. Verify measurements before ordering. Replaces SBA080109064, 1512172532, 15601-97010, 1560197010, 396829R1, 700709214, 71352142, 86514598, A75579, B3440, D129916, GAT9440, 133758R1, 1352142, 15121-72532, 1560197010, 1612875C1, 1612875C91, 17442, 2M5840, 259440, 3H3897, 301-C396829, 4707726, 476614, 617143, 619508, 685590, 7L2904 (Part No: 86514598)$6.16

Fan Belt - Used on Ford Compacts: 1120 (87 ), 1210 (83 87), 1215 (87 ), 1220 (87 ), 1310 (83 87), this fan belt is a Raw Edge Cogged Polyester Cord measuring 3 8 inches X 31.5 inches. Replaces SW03632, (Part No: SBA080109050)$13.07

Fan Belt - Belt is 41 3 8 inches long. For tractor models: 8N late (with Side Mount Distributor), NAA 1952-1954, Jubilee. This belt also works with alternator conversion kit part number 8NL10300ALT. (Part No: 8N8620)$5.81

Fan Belt - For tractor models 9N, 2N and early 8N with Generator and Front Mount Distributor. Not for tractors with alternator conversion. This belt is 46-1 8 inches long. (Part No: 9N8620B3)$13.46

Fan Blade - (17 inch) 7 Blade, Metal. Center hole is 3.25 inch. Bolt holes are 2.5 inches apart (measured in a square pattern) AND 4 inches apart (measured diagonally). Fits (5600, 6600, 6700, 7600, 7700, 8 76> less Air Cond), (7600, 7700 9 76-9 80 with Air Cond), (7710 7 81-10 88 less Air Cond). (Part No: E7NN8600DA)$44.25

Fan Blade, 3 Blade - This 3 blade fan measures 16 inches in diameter. Fits tractor models: 501, 600 Series, 601 Series, 800 Series, 801 Series, 900 Series, 901 Series, 2000, 4000 1955 to 1964. 4 cylinder gas. 3.120 inch bolt circle, .625 inch pilot hole. USED WITH WATER PUMPS CDPN8501C and DCPN8501A. May come painted black, primer gray or primer red. (Part No: NCA8600S)$38.91

Fan Blade - 4 Blade - Fan Assembly, 4 Blade, 16 inch diameter, 0.625 inch pilot hole, and mounting holes on 2.5 inch center. For tractor models 2000, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3900, 3910, 4000, 4100, 4110, 420, 4400, 4500, 4600, 4610, 5100, 515, 531, 535, 5600, 6600. Replaces 87017802, 81805721, C5NN8600B, C5NN8600A (Part No: C5NN8600A)$39.62

Fan Blade - 4 Blade - For tractor models 9N, 8N, NAA, Jubilee. Has 4 mounting holes on 3.125 inch centers. Diameter is 15.75 inch. (Part No: 8N8600A)$33.47

Fan Blade - 6 Blade - Fan Assembly, 6 Blade, 16 inch outside diameter, metal, .625 inch pilot hole, 4 mounting holes in 2.5 inch circle. For AG and Industrial models 1965 and later; 2000, 230, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 340, 3400, 340B, 3430, 345C, 345D, 3500, 3600, 3610, 3930, 4000, 4100, 4110, 4130, 420, 4400, 445 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4610, 4630, 5000, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 5500, 555A, 555B, 555C, 555D, 55C, 650, 6500, 655, 655A, 655D, 675. (Part No: D9NN8600AA)$36.38

Fan Blade, 6 Blade - This 6 blade fan is for tractor models 2000, 4000, 600, 800, 900. This 6 blade fan has a .5 inch pilot hole, 3.15 inch 4 hole mounting center, 15.5 inch outside diameter. (Part No: NCA8600B)$54.18

Fan Blade, 6 Blade - For 9N, 8N, 2N, NAA, Jubilee. 6 Blade Fan for extra cooling in those hotter climates. (Part No: 9N8600D)$54.03

Fan Blade, 6 Blade, Pusher - 15.50" diameter, .500" pilot hole, 2.187" center to center on mounting holes. For tractor models 1801, 1811, 1821, 1841, 1871, 1881, (2000, 4000 up to 1964), 2030, 2031, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 770, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860. (Part No: JE8600A)$91.08

Fan Blade, 6 Blade, Pusher - 15.50" diameter, .500" pilot hole, 2.187" center to center on mounting holes. For tractor models 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981. (Part No: JE8600A)$91.08

Fan Blade, 7 Blade - This new 7 Blade Fan has a 17 inch diameter, 0.625 inch pilot hole, and mounting holes on 1.75 inch center. Replaces D3NN8600A, 81829494, 83910793, 87010708. (Part No: 87010708)$44.40

Fan Bracket - This Fan Bracket is used on Ford 8700 and 9700 Tractors. It replaces original part number D6NN8632A (Part No: D6NN8632A)$138.75

Fan / Generator Belt - This Fan Belt measures 45.57 inches length and 0.453 inch width wedge belt. Direct replacement to A4897, A4897R, TX10276, 102752A, 303045080, 4796327, 4796328 Please verify measurements before ordering (Part No: A4897R)$5.99

Fan Pulley - This Fan Pulley is used on Ford New Holland models 8400, TW10, TW20, TW30, 8000, 8200, 8700, 9000, 9600, 9700. Replaces D2NN8610B, 83913833 (Part No: D2NN8610B)$162.27

Fan Shroud - Shroud, Radiator Fan. For 2000, 2100, 2120, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 420 LOADER, 4400, 4410, 4600, 4610, 515, 530A, 531, 532. Fiberglass type. Must drill holes. Not like original. Replaces C5NN8146J, 83910061, D6NN8146D, D6NN8146H. (Part No: D6NN8146H)$54.35

Fan Shroud - For 8N, 9N, 2N. Metal Fan Shroud. (Part No: 2N8146)$57.96

Fan Shroud - This fan shroud is plastic and fits models 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 3230, 3430, 3930, 4130, 4630, Industrials 230A, 234, 250C, 260C, 334, 335, 340A, 530A, 540B. Also replaces E0NN8146DC and 81863583. (Part No: E0NN8146DB)$41.48

Fan Shroud - This fan shroud is for tractor models: NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110, 2111, 2120, 4000, 4110, 4120, 4121 all before 1965. This fan shroud is metal, and is made to fit original radiators. It must be slightly trimmed to fit aftermarket radiators lower pipe. (Part No: NCA8146A)$66.96

Fan Shroud Hardware Kit - This fan shroud hardware kit is used for mounting original Fan Shrouds on Ford Tractors, 1939-1964. The kit includes 7 screws and 7 washers. Some models listed use less than 7. (Part No: 357622-K)$1.95

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3 8 inches (11cm) length, 2-1 2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: MBH1153)$70.77

Pulley, Water Pump - For tractor models (8000, 8600 both 1968 thru 7 31 1976), (A64 prior to 8 31 1976). (Part No: C7NN8A528A)$45.70

Pump, Water - For tractor models A64 (<8 31 1976), 8000, 8200, 8400, 8600 (8000, 8200, 8400, 8600 from 68-7 76). This water pump with pulley is completely new, from the seal to the housing. Replaces DHPN8A513B-R, 83912464, 8508AB. (Part No: DHPN8A513B)$100.74

Radiator - Radiator Assembly with Oil Cooler. For tractor models 7000, 7100, 7200. For Radiator Cap order part number E2NN8100BA. Inlet 1 1 2 inches, Outlet 1 3 4 inches, Ht: 24 inches, W: 18 1 2 inches, Thickness: 4 1 4 inches, Core Ht: 17 5 8 inches, W: 17 7 8 inches, Thk: 3 inches, 5 Rows of tubes, 7 Fins per inch. (Part No: D3NN8005B)$384.05

Radiator - Has 5 rows of tubes and 7 fins per inch. The core measures 17 3 4 inches tall and 18 inches wide. Radiator comes with built in oil Cooler in bottom tank. Used on tractors without Air Conditioning. Fits tractor models 5110, 5610, 6610, 7410, 7610. Also replaces E0NN8005GB15M, E0NN8005GA15M and E0NN8005HA15M. (Part No: E0NN8005GC15M)$357.14

Radiator - For the following tractors without Oil Cooler: 4100 or 4600 (Diesels with cab and AC 1977>), 4500, 5000 (1965 to 1975); 5600, 6600 (1975 to 1981); 535 (1975 to 1978). Industrials: 340 (< 9 1985), 445 (without Torque Converter 10 1978 - 9 1986). Replaces D6NN8005B, C5NN8005N, 83918041, 83916894, 83916415. Measures core size: 17.500 inches wide, 17.750 inches high, 3 rows of tubes. (Part No: 86531508)$312.32

Radiator - For tractor models 6810 with Air Conditioning, 7610 with Air Conditioning and Viscous fan, 7810 with Oil Cooler holes on rear side. This Radiator uses cap part number R1855. (Part No: E7NN8005BA)$376.61

Radiator - For model 1710. Radiator. Core measures 14.812 inches high, 16.812 inches wide. Filler cap is top center. Top hose connection is left, bottom is left. (Part No: SBA310100440)$243.14

Radiator - For 1510. Radiator measures 14.8 inch high and 16.8 inch wide core. Fill cap center, top hose left, bottom hose left. (Part No: SBA310100291)$243.14

Radiator - Fits Dexta (1957 to April 1962). (Part No: 957E8005)$315.69

Radiator - Radiator Fits Major, Power Major, Super Major. Radiator core measures 18 1 2 inches wide and 18 3 4 inches tall. Has attaching lugs on outer edge. Replaces 211000, AR2106, SW07550, SW15423. (Part No: E1ADDN8005C)$413.34

Radiator - This Radiator, with Oil Cooler is copper core. Core size 18 inches wide, 17-3 4 inches high, 4 rows of tubes, 8 fins per inch. Replaces D8NN8005KA, D5NN8005A. For tractor models 5600, 6600, 7600. All with diesel engines. (Part No: D8NN8005KB)$377.65

Radiator - Core is 16.812 inches wide, 14.812 inches high. For model 1510. (Part No: SBA310100291)$243.14

Radiator - Radiator with Oil Cooler. Core measures 19.937 inches high, 20.00 inches wide, 3 rows of tubes, 10 fins per inch. Inlet 1 1 2 Inches, outlet 1 3 4 inches. For tractor models (6710 with Air Conditioning), (7700, 7710 with or without Air Conditioning). Replaces E1NN8005EA15M, D6NN8005F, D5NN8005T, D5NN8005B. (Part No: E1NN8005EB15M)$509.23

Radiator - This is a Restoration Quality radiator for the 9N, 2N and 8N models. This radiator replicates the original with lower cast connections and domed top tank, 4 rows of tubes, and Copper core. Replaces 8N8005. (Part No: 8N8005-R)$270.78

Radiator - 14-7 8 inches high x 16-3 8 inch wide core, 2 rows of tubes, serpentine fin construction. For model 1900. If 12-7 8 inch core height needed order part number SBA310100031. (Part No: SBA310100280)$561.78

Radiator - 12-7 8 inches high x 16-3 8 inches wide core, 2 rows of tubes, serpentine fin construction. Filler cap is top center. For tractor models 1500, 1600, 1700, 1900. (Part No: SBA310100031)$434.51

Radiator - Core 16.625 inches wide x 15.750 inches high, 3 rows of tubes. For tractor models 1720, 1920. (Part No: SBA310100600)$388.24

Radiator - Core size is 15.50 inches wide, 15.75 inches high, 3 rows of tubes. For tractor models 1530, 1630, 1725, 1925, TC25, TC25D, TC29, TC29D, TC29DA, TC33, TC33D, TC33DA. (Part No: 86402723)$479.90

Radiator - This radiator has 3 rows of tubes, stamped steel inlets and outlets, and it does not come with a cap. This radiator fits tractor models: NAA, 500, 501, 600, 800, 900, 2000, 4000 thru 1964, except HD ind. and fork lift. Also 172 inch, 192 inch power units. Replaces NCA8005B, C and NDA8005B. Core measurements Height: 17 inches. Width: 15-1 4 inches. (Part No: C5NN8005ABECON)$196.89

Radiator - For Super Dexta. (Part No: 959E8005)$299.39

Radiator - For tractor models 256V, 276II, 276V, (9030E, 9030V ALL 7 1990 thru 9 1997)Core Size: 26.00" Wide, 30.375" High. Repalces 9706675, 9700356, V78976, 89706675. (Part No: 86018393)$1045.69

Radiator - For 5700, 6700 all with AC 8 1976 and up. Radiator. Core dimensions: 20.0 inches wide, 19.875 inches high, 3 rows of tubes, 7 fins per inch. (Part No: D6NN8005D)$473.46

Radiator - For 7910, 8210 all 1982 and up. Radiator. Core dimensions: 20.0 inches wide, 23.5625 inches high, 5 rows of tubes, 8 fins per inch. (Part No: E1NN8005BD15M)$758.91

Radiator - For L553 Skidloader with Diesel Engine, L555 Skidloader with Diesel Engine SN# 712165. Radiator. Core size: 18.0" wide, 17.75" high, 3 rows of tubes, 8 fins per inch. (Part No: 9828737)$368.68

Radiator - For model 1300. Comes with Cap. (Part No: SBA310100211)$285.60

Radiator - This radiator has 8 fins per inch and 5 rows of tubes. HAS A 5 8 Inch HEATER BYPASS CONNECTION TO THE LEFT OF THE OUTLET CONNECTION. It is 20.3125 inches tall and the core size is 20.3125 inches wide. For tractor models: TS90, TS100, TS110, TS115, 5640, 6640, 7740 WITH A C. Replaces 82013164, 82015097, 82015095, 82011374, 82015103, 82015101, F0NN8005AF15M, F0NN8005AE15M, F0NN8005AD15M, F0NN8005AC15M, F0NN8005AB15M, F0NN8005AA15M, 73401042. (Part No: 82015097)$564.03

Radiator - Copper and Brass Radiator, core measures 21.5 inches tall, 20.75 inches wide and 2.5 inches thick. For tractor models: C175, C185, C190, L175, L180, L185, L190, LS180B, LS185B, LS190B, LT185B, LT190B. Replaces OEM numbers 87013856, 87015523. FOR PLASTIC TANK version see part number 87015523. (Part No: 87013856)$430.94

Radiator - This is a restoration quality version of the radiator used on Ford 4 cylinder tractors, 1953-1964: Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140. Used on tractors without oil cooler in lower tank. Features a cast lower pipe, cap, drain tap (not shown) and overflow tube. Replaces C5NN8005AB, NCA8005B, NCA8005C, NCA8005D NAA-8005-B, NAA8005B (Part No: C5NN8005AB)$269.95

Radiator - This radiator has 10 fins per inch and 8 rows of tubes. It is 23.87 inches tall and the core size is 21.25 inches wide. This radiator fits Ford New Holland models 555E, 655E, 675E, LB75. Replaces original part number 85802859. (Part No: 85802859)$1224.86

Radiator - This radiator has 8 fins per inch and 4 rows of tubes. It is 22.4375 inches tall and the core size is 18.5 inches wide. This radiator fits the Ford New Holland Tractor 7810S. Replaces 82980245. (Part No: 82980245)$669.93

Radiator - This radiator has core measurements 19 9 16 inches wide x 18 inches high x 4 1 2 inches deep. It has 5 rows of tubes. It is used on New Holland TB80, TB85, TB90, TB100, TB110, TB120. Additional $70 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces 82985374. (Part No: 82985374)$643.19

Radiator - This radiator has 10 fins per inch and 3 rows of tubes. It is 26.875 inches tall and the core size is 27.5 inches wide. This radiator fits Ford New Holland Tractor models G170, 8670, 8670A. Replaces 86012174, 89825244, 9825244. (Part No: 86013264)$1065.11

Radiator - This radiator has 8 fins per inch and 4 rows of tubes. It is 26.875 inches tall and the core size is 27.5 inches wide. This radiator fits Ford New Holland Tractor Models G190, 8770, 8770A. Replaces 86012173, 89821616, 9821616 Note: When replacing previous radiator 86012173 the fan and shroud will also need replacing. These are currently unavailable through Yesterday's Tractor. (Part No: 86013263)$1183.55

Radiator - This radiator has 8 fins per inch and 5 rows of tubes. It is 26.875" tall and the core size is 27.5" wide. This radiator fits Ford New Holland Tractor models (G210, G240, 8870 and 8970 all Serial number 410465 and up), 8970A . Replaces 86012172, 89821595, 9821595. There is an additional charge of $200.00, must be shipped truck freight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 86013980)$1261.60

Radiator - This radiator fits the following tractor models: T6010, T6020, T6030, TS100A, TS110A, TS115A, TS125A, TS135A, TS6020, and TS6030. The core measures 23 1 2 inches high, 20 5 8 inches wide, and 4 7 16 inches deep. Replaces part numbers: 82033794, 82033772, 87306757, 87306756, and 82033774. (Part No: 82033774)$1023.56

Radiator - This radiator fits the following tractor models: TN60VA, TN65V, TN70VA, TN75F, TN75VA, TN75V SPECIAL, TN80F, TN85FA, TN90, TN90F, TN95F, TN95FA, and TN95VA. The core measures 17 1 2 inches high, 17 1 2 inches wide, and 2 3 8 inches deep. Replaces part numbers: S5172926 and 5172925. (Part No: 5172925)$453.66

Radiator - This radiator fits the following tractor models: TM135, TM150, TM165, TS110A DELUXE, TS115A DELUXE, 8360, and 8560. The core measures 24 5 8 inches high, 20 5 8 inches wide, and 4 inches deep. Replaces part numbers: 82006827, 82013307, and 82008038. (Part No: 82006827)$1048.97

Radiator - This radiator fits the Ford 1110. The core measures 10 1 4 inches high, 11 3 8 inches wide, and 1 1 4 inches deep. Replaces part number SBA310020020. (Part No: SBA310020020)$267.94

Radiator - This radiator fits the Ford 1200. The core measures 12 1 2 inches high, 12 inches wide, and 1 1 2 inches deep. Replaces part number 86561701. (Part No: 86561701)$364.46

Radiator - This radiator fits the following tractor models: 8700 and 9700. The core measures 24 13 16 inches high and 22 1 8 inches wide and has 4 rows of tubes. Replaces part numbers: D5NN8005P and D5NN8005S. (Part No: D5NN8005P)$838.38

Radiator - This radiator fits the 5610S, 6610S, and 7710S. The core measures 22 1 2 inches high, 18 3 4 inches wide, and 2 3 4 inches deep. Replaces part number 82988918. (Part No: 82988918)$634.12

Radiator - This new Radiator is designed and built to precise dimensional specifications to ensure an exact fit. Each Radiator has a stamped brass tank, undergoes a rigorous quality inspection, and is 100% leak tested. This Radiator without an Oil Cooler has 7 fins per inch and 3 rows of tubes. It is 17.75 inches tall and the core size is 18 inches wide. It has a 24 inch overall height and 18 3 4 inch overall width. Confirm measurements before ordering. This radiator fits: 5000, 5100, 5600, 6600. Replaces C5NN8005E, C7NN8005E, C5NN8005SE. (Part No: C7NN8005E)$249.48

Radiator - Radiator Assembly with Oil Cooler on engine side for: (345C, 445C 12-88 12-9, (4500, 5000, 5100, 5200 all 1965 and up), 535 with TORQUE CONV., 545 with TORQUE CONV. 7 11-88, 5600 1975, 6600 1975, 6600C. (Part No: D8NN8005SB)$348.86

Radiator - This is a Replacement High Quality Radiator. It is not exactly like original but will replace the original with no modification required (except if using a fan shroud). For 8N, 9N, 2N. Copper Core, 3 rows of tubes, weight 16 lbs. Drain cock included. 1 year warranty. DOES NOT COME WITH CAP. The Original or Replacement Fan Shroud will not fit this radiator without some modification to the fan shroud. This modification consists of trimming the inside of the bottom of the fan shroud. This is a replacement radiator for OEM part number 8N8005. (Part No: 8N8005)$193.13

Radiator - Core size (the finned part) is 17 3 8 inches wide, 16 1 2 inches high with 3 rows of tubes and 9 fins per inch. Also replaces EONN8005MA15M, EONN8005KA15M, EONN8005LA15M, EONN8005MB15M, EONN8005MD15M, C7NN8005N. For 3-cylinder engines (1965 and newer) on: 2000, 2100, 2120, 2300, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4140, 4400, 4600, 4610. (Part No: C7NN8005H)$177.00

Radiator - For tractor models 6810, 7610, 7810 with Air Conditioning. Radiator Core is 18 inches wide, 17.75 inches high. Inlet is 1.5 inch diameter, outlet is 1.75 inch diameter. (Part No: R2759)$516.71

Radiator - For tractor models 8630, TW15 (1983 & Later), TW20 with Air Conditioning. (Part No: R2761)$855.53

Radiator - For tractor models 8730, TW25 (1983 & Later). (Part No: R2762)$904.48

Radiator - For tractor models 8830 (1983 & Later), TW30, TW35 (1983 & Later). (Part No: R2763)$855.53

Radiator Assembly - For the following tractors without oil cooler: 4610 with 4-cylinder diesel (1984 to 1988). Replaces E4NN8005AB15M. For Radiator Cap order PN# E2NN8100BA (Part No: E4NN8005AA)$312.32

Radiator Assembly - For the following tractors without Oil Cooler, with Air Conditioning: 6810, 7610 (1981 to 1991). Replaces E7NN8005BA. For Radiator Cap order part number E2NN8100BA. (Part No: E7NN8005BB15M)$375.35

Radiator Cap - For tractor models Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: E62A8100A)$10.23

Radiator Cap - Used as a primary radiator cap for many Japanese built compact tractors, this 13 psi cap is also used for radiator overflow reservoir systems in some larger ag tractors. Fits 3 4 inch deep neck. Verify OEM numbers before ordering. Replaces 157017-2030, 2097708, 3280783M1, 3280783M1GV, A171919, A171919GV, ESL10493GV, TPCH18207GV, TP-CH18207GV, 2097708GV, 1570172030GV, 157017-2030GV, E5TH8100AA, E5TH8100AAGV, CH18207, ESL10493, SBA145546060, 87749607. Sub for CH10427 (Part No: CH18207)$9.65

Radiator Cap - Plain, Conventional Type 4 psi Pressure Cap, less ornament. For tractors 8N, 9N, 2N. (Part No: 2N8100A-LW)$11.22

Radiator Cap - This radiator cap is a low pressure 4 psi cap. This radiator cap is for tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, series with 4 cylinder gas and diesel (1953 to 1964) except Majors. (Part No: 1T8100A2)$6.09

Radiator Cap - 13 PSI Radiator CAP (FOR 2000, 3000, 4000, 5000, 7000 1965 TO 1975), (2600, 3600, 4100 4600, 5600, 5700, 6600, 6700, 7600, 7700 1975 TO 1981), (2610, 3610, 4110, 4610, 5610 6610, 7610, 7710 1981 and up). REPLACES D2AE8100A1A. (Part No: E2NN8100BA)$5.03

Radiator Cap, Black - For 8N, 9N, 2N with pressurized system. Winged Radiator Cap. (Part No: 2N8100A)$8.04

Radiator Cap, Chrome - For tractor models 8N, 9N, 2N with pressurized system. Winged Radiator Cap, Chrome. (Part No: S.61615)$11.84

Radiator for Tractor with Oil Cooler - Core size (the finned part) is: 18.000 inches wide, 17.750 inches high, 4 Rows of tubes with 8 fins per inch. Fits Industrials: 455 (7 87-11 88), 550 (8 81>), 555 (8 81>), 555A (8 81>), 555B (8 81>), 655 (8 81>), 655A (8 81>). Replaces E0NN8005FA15L, F2NN8005FA15L, 83925458. (Part No: E0NN8005FA15L)$381.95

Radiator Hood Pad - These Radiator Hood Pads fit models 8N, 9N, 2N. One pad is used at the top of the radiator. (Part No: 2N8032)$2.46

Radiator Hose, Bottom - Inside diameter 1.725 inches. Fits GAS and DIESEL MODELS: 2000 (3 Cylinder), 2600, 3000, 3055, 3100, 335, 340, 3400, 3500, 3600, 3610, 4100, 4110, 4140, 420, 4600. GAS ONLY MODELS: 4000, 445, 5000, 540, 545, 5600, 6600, 7000, 7700. (Part No: C5NN8286B)$7.46

Radiator Hose, Bottom - For tractor models Fordson Major, Power Major, Super Major. (Part No: E1ADDN8286)$13.47

Radiator Hose Clamp - This radiator hose clamp is an EXACT reproduction of the ORIGINAL hose clamp. This radiator hose clamp is for tractor models 8N, 9N, 2N (1939 to 1954), NAA, Jubilee (2 per tractor, 1953 to 1954). For 1 3 4 inch to 2 inch outside diameter hoses. Also works on other Ford 4 Cylinder tractors through 1964. Priced each. Replaces 608287. PLEASE NOTE: Original hoses are usually thicker than current hoses available for many antique tractors. Measure your current outside diameter to ensure fit. You can add electrical tape to the ends to have these original style clamps effectively tighten on newer (thinner) hoses. (Part No: 608287)$3.75

Radiator Hose Kit - Kit contains upper, lower, filler, inlet-pump-block, bypass-pump-thermostat housing-cut to length hoses. For model Dexta diesel only. Replaces 957#8260A, 957E8286, 957E8333A, E5CJ9, E15CJ9 (Part No: S.66632)$29.66

Radiator Hose Kit - Kit contains upper, lower, filler, inlet-pump to block, bypass-pump to thermostat housing- cut to length hoses. For model Super Dexta diesel only. (Part No: S.66633)$31.58

Radiator Hose Kit - Kit contains upper, lower and filler hoses. For tractor models Major, Power Major, Super Major diesel only. (Part No: S.66641)$27.92

Radiator Hose Lower - Hose, Radiator Lower less AC. For 5700, 6700, 6710, 7710. (Part No: D6NN8286B)$22.49

Radiator Hose Lower - Hose, radiator lower. For tractor models 750, 755A, 755B, 755. (Part No: D8NN8286AA)$37.27

Radiator Hose Lower - Hose, Radiator to Cooler, lower. For tractor models 8200, 8400, 8600. (Part No: C7NN8286A)$10.93

Radiator Hose Lower - Hose, Radiator Lower. For models 5600 (with Oil Cooler), 5610, 6600 (with Oil Cooler), 6610, 7600 (with Oil Cooler), 7610. (Part No: D5NN8286F)$9.51

Radiator Hose Lower - Hose, Radiator Lower. For tractor models 5640, 6640, 7740, 8240, 8340. (Part No: F0NN8286AB)$15.98

Radiator Hose, Lower - For tractor models 8670, 8770, 8970. (Part No: 9821599)$13.58

Radiator Hose, Lower - This lower radiator hose goes from the water pump to lower radiator. Hose is 1 1 2 inch inside diameter. For tractor models 2000, 4000, NAA, 2N, EARLY 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 312588)$6.93

Radiator Hose, Lower - Hose, Radiator to Outlet Lower. For model Late 8N. (Part No: 8N8286)$8.13

Radiator Hose, Lower - This Lower Hose has an inside diameter on the small end of 1.645 inches and 1.757 on the larger end. For tractor models 445 Diesel and Gas, 450 Diesel and Gas, 4500, 535, 540 Diesel, 545 Diesel, 6500 Construction, 335, 5000, 5100, 5600 (without Oil Cooler), 5900 (without Air Conditioning), 6600 (without Oil Cooler), 7000, 7100, 7600 (without Oil Cooler). (Part No: C5NN8286C)$10.41

Radiator Hose, Lower - With a 1.312 inch inside diameter. For 1700, 1900, both January 1979 to September 1979. Lower radiator hose. (Part No: SBA310160150)$26.27

Radiator Hose, Lower - 1.25 inch inside diameter. For tractor models 1700, 1900 both after Oct 1979. (Part No: SBA310160350)$28.50

Radiator Hose, Lower - For tractor models Dexta, Super Dexta. Replaces 81718088, 87295272, 957E8286 (Part No: 957E8286)$28.13

Radiator Hose, Lower - A= 1.312 inches. For tractor models 1510, 1710. (Part No: SBA310160441)$23.57

Radiator Hose, Lower - A= 1.250 inch. For model 1500. (Part No: SBA310160310)$33.29

Radiator Hose, Lower - New lower radiator hose with an inside diameter of 1.312 inch. This radiator hose fits the Ford New Holland Compact Tractor 1720. (Part No: SBA310161031)$10.32

Radiator Hose, Lower - A= 1.00 inch inside diameter. For tractor models: 1120, 1210, 1215, 1220, 1310. (Part No: SBA310160740)$21.81

Radiator Hose, Lower - This Lower Radiator Hose fits the Ford 4200 (Gas and Diesel). It has an inside diameter of 1 3 4 inches and replaces the original part number C5NN8286D. (Part No: C5NN8286D)$19.74

Radiator Hose, Lower - This lower hose has an inside diameter of 1.25 inches. For models 1320, 1520, 1620, 1715. Verify measurement. (Part No: SBA310161091)$12.35

Radiator Hose, Lower - This Lower Radiator Hose is used on Ford 4 Cylinder tractors 1954-1964 with factory or converted to power steering. Replaces 313151 (Part No: 313151)$9.71

Radiator Hose, Lower - With Clamps - For tractor models TW10, TW20, TW30. (Part No: D8NN8B274AB)$12.21

Radiator Hose Upper - Hose, Radiator Upper with Oil Cooler and Air Conditioning. For tractor models 8200, 8400, 8600. (Part No: D2NN8260B)$17.22

Radiator Hose Upper - Hose, radiator upper. For TW10, TW20, TW30 (Part No: D8NN8260BB)$20.65

Radiator Hose Upper - Hose, Radiator Upper with Air Conditioning. For tractor models 6710, 7700, 7710. (Part No: D4NN8260C)$14.09

Radiator Hose Upper - Hose, Radiator Upper. For tractor models 5700, 6700, 6710, 7700, 7710. (Part No: D5NN8260C)$10.67

Radiator Hose Upper - Hose, Radiator Upper. For 8530, 8630, 8730, 8830, TW15, TW25, TW35, TW5. (Part No: E3NN8333AA)$12.98

Radiator Hose Upper - This Upper Radiator Hose has a 1.5 inch inside diameter and a Spigot. For tractor models 3230, 3430, 3930, 4130, 4630. (Part No: E9NN8260AA)$11.00

Radiator Hose, Upper - For tractor models 8670, 8770, 8970. (Part No: 9821598)$18.39

Radiator Hose, Upper - For tractor models 750, 7500, 755, 755A, 755B. (Part No: D1NN8260B)$15.23

Radiator Hose, Upper - For model 7710. (Part No: E6NN8260AA)$21.54

Radiator Hose, Upper - Hose, Radiator Upper. For tractor models 7710. (Part No: E6NN8260BA)$14.82

Radiator Hose, Upper - For tractor models 4830, 5030. (Part No: F0NN8260BB)$20.97

Radiator Hose, Upper - This Upper Hose is for Gas engines. Hose inside diameter 1.5 inch. Fits radiator upper. For 2000, 2310, 2600, 2610, 2810, 2910, 3000, 335, 3600, 3610, 3910, 4000, 4100, 4110, 420, 4600, 4610, 515, 532, 535, 5600, 5700, 6700, 7600, 7700. (Part No: C5NN8260D)$11.99

Radiator Hose, Upper - Hose, Radiator Upper. For 5640, 6640, 7740. (Part No: F0NN8260CA)$6.83

Radiator Hose, Upper - Hose, Radiator Upper. For 7840, 8240, 8340. (Part No: F0NN8260DA)$12.23

Radiator Hose, Upper - For 1700 all, 1900 January 1979 to September 1979. Upper Radiator Hose. (Part No: SBA310160170)$19.31

Radiator Hose, Upper - Hose inside diameter 1.5 inch. FITS: 2000 (3 Cylinder DIESEL), 2600, 2610, 3000, 3000 DIESEL, 3055 DIESEL, 3100 DIESEL, 335, 335 DIESEL, 340, 340 DIESEL, 3400 DIESEL, 3500 DIESEL, 3600, 3600 DIESEL, 3610, 3610 DIESEL, 4000, 4100, 4100 DIESEL, 4110, 4110 DIESEL, 4140 DIESEL, 420 DIESEL, 445 DIESEL, 450 DIESEL, 4600, 4600 DIESEL, 4610, 4610 DIESEL, 5000, 540, 545, 550, 555, 5600, 5610, 5900, 6500, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: D5NN8260D)$6.09

Radiator Hose, Upper - This upper radiator hose is for tractor models NAA, Jubilee, 600 series, 700 series, 800 series, 900 series, 2000 4-cylineder, 4000 4 cylinder Series. It can replace 310048. This hose measures 7 3 8 inches long, 1 1 2 inch outside diameter and 1 3 16 inside diameter. (Part No: NAA8260B)$3.53

Radiator Hose, Upper - 1.50 inch inside diameter. For models: 1520, 2020, 2030, 300B, 301A, 302, 302A, 401B, 401C, 380, 400, 401, 440, 440A, 440B, 480, 480A, 480B. All with gas engines. (Part No: T22496)$12.87

Radiator Hose, Upper - For model Dexta. (Part No: 957E8260A)$8.23

Radiator Hose, Upper - A= 1.312". For model 1710. (Part No: SBA310160450)$23.43

Radiator Hose, Upper - A= 1.312 inch inside diameter. For tractor models TC25, TC29, TC33, 1530, 1630, 1725, 1925. (Part No: 86519847)$8.16

Radiator Hose, Upper - A= 1.25 inch For model 1500. (Part No: SBA310160380)$28.10

Radiator Hose, Upper - 1.312 inch inside diameter. For tractor models TC30, 1320, 1520, 1620, 1715, 1720. (Part No: SBA310160932)$15.21

Radiator Hose, Upper - Hose, Cylinder Head to Radiator Upper. For tractors 9N, 2N and 8N. (Part No: 2N8260)$4.49

Radiator Hose, Upper - A= 1.00 inch inside diameter. For tractor models: 1120, 1210, 1215, 1220, 1310. (Part No: SBA310160730)$14.01

Radiator Hose, Upper - This Upper Radiator Hose fits the Ford 4200 (Gas and Diesel). It has an inside diameter of 1 1 2 inches and replaces the original part number C5NN8260E. (Part No: C5NN8260E)$10.35

Radiator Hose, Upper - Inside diameter 1 1 4 inches, For tractor models 1510. (Part No: SBA310160750)$16.38

Radiator Hose, Upper - New upper radiator hose with an inside diameter of 1.25". This radiator hose fits the Ford New Holland Compact Tractor 1900 (Serial number U902326 and up. 10 1979 and later). (Part No: SBA310160430)$30.78

Radiator Mounting Bolt Kit - These Radiator Mounting Bolts are used on aftermarket radiators to mount the radiator to the front support. Kit includes 2 Carriage Bolts, 2 Nuts, 2 Lock Washers and 2 Washers. For tractor models: 2000 4 cylinder, 2N, 4000 4 cylinder, 8N, 9N, Jubilee, NAA, NAB, 600, 601, 800, 801, 2030, 2031, 2120, 2130, 2131, 4030, 4031, 4120, 4121, 4130, 4131 4 cylinder. Replaces Nut 34670, 34090S, Flat Washer 44732, Lock Washer 34808, Carriage Bolt 351655S8. (Part No: 351641S8)$5.63

Radiator Mounting Pads, Pack of 2 - This pack of 2 radiator mounting pads is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. Replaces B9NN8125A, 81811605 and C5NN8125A. Two are used per tractor on the bottom of the radiator. (Part No: 180705M1)$2.66

Radiator, New - This is a New Radiator with oil cooler connections. It is used on Ford New Holland models: 3230, 3430, 3610, 3610N, 3610NO, 3610V, 3930, 4130, 4410, 4630, 260C, 340, 340A, 340B, 420, 445, 532. Measurements in inches: Overall Height: 22 1 2, Overall Width: 19, Core Height: 16, Core Width: 17 1 4, Depth: 2 1 4, Rows: 3, Fins Per Inch: 8, Fill Neck Height: 3 4, Inlet: 1 1 2, Outlet: 1 3 4, Oil Cooler: 45 Degree Flared Fittings (7 8-14 Threads) on 10 inch centers. Replaces OEM numbers: 82847505, E1NN8005AB15M (Part No: E1NN8005AB15M)$263.92

Radiator, New - Our new radiator is designed and built to precise dimensional specifications to ensure an exact fit. Each radiator has a stamped brass tank, undergoes a rigorous quality inspection, and is 100% leak tested. This radiator has 10 fins per inch and 5 rows of tubes. It is 24.875" tall and the core size is 21.875" wide. This radiator fits multiple Ford New Holland Tractor models. (NOTE: replaces E3NN8005BD15M, E3NN8005CE15M, E3NN8005DE15M). Can be used with or without oil cooler. (Part No: 82847503)$714.49

Radiator - PTR - Plastic Tank Radiator core measures 21.5 inches tall, 20.75 inches wide and 2.5 inches thick. - For tractor models: C175, C185, C190, L175, L180, L185, L190, LS180B, LS185B, LS190B, LT185B, LT190B. 3 rows of tubes. Replaces OEM numbers 87013856, 87015523. FOR Copper and Brass version see part number 87013856. (Part No: 87015523)$449.29

Radiator with Oil Cooler - For the following tractors with oil cooler, 3 cylinder GAS 158 CID or 158 CID Diesel: 2000, 3000, 4000, 4100, 4400 (1965 to 1975); 420, 532 with torque converter (1975 to 1981). Core is 18 inches tall and 16 inches wide. Oil cooler fittings on front side. Oil cooler can be plugged and not used if desired. For Radiator Cap order part number E2NN8100BA. Replaces original part numbers D8NN8005PA, E0NN8005MD15M, E0NN8005MA15M, E0NN8005KA15M, E0NN8005LA15M, E0NN8005MB15M. (Part No: D8NN8005PA)$158.77

Radiator with Oil Cooler-Rear Fittings - Oil cooler fittings are on the back-side of radiator. Replaces 83925458. Core size (the finned part) is: 18.000 inches wide, 17.750 inches high, 4 rows of tubes, 8 fins per inch. Fits industrials: 455 (7 87-11 88), 550 (8 81>), 555 (8 81>), 555A (8 81>), 555B (8 81>), 655 (8 81>), 655A (8 81>). (Part No: D8NN8005BB)$354.06

Thermostat - Thermostat, 168 degree with gasket. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700, Dexta, Super Dexta. (Part No: D8NN8575AAWG)$9.18

Thermostat - 172 degree with gasket. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700, Major, Super Major. (Part No: D8NN8575CAWG)$10.32

Thermostat - Thermostat, 203 degree with gasket. For tractor models 4830, 5640, 6640, 7740, 7810, 7840, 7910, 8210, 8240, 8340, 8530, 8630, 8670, 8730, 8770, 8830, 8870, 8970, G170, G190, G210, G240, TW10, TW15, TW20, TW25, TW30, TW35, TW5. (Part No: D8NN8575FBWG)$13.02

Thermostat - This thermostat is 160 degree lo-temp with gasket. For gas engines 1953 to 1964. (Part No: EAF8575BWG)$9.14

Thermostat - This thermostat is 160 degree lo-temperature. For tractors models 8N, 9N, 2N. Fits in upper radiator hose with the pointed end towards the front of the tractor. Thermostat is 2.250 inches long. Replaces 181634M1, B2NN8575A, 9N8575A3 (Part No: B2NN8575A)$21.89

Thermostat Housing - This thermostat housing is for tractor models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Gasket available as part number EAF8255A, please order separately. (Part No: 310031)$46.48

Thermostat Housing to Block Gasket - Tractors: all 4-cylinder, 1953-1964, gas and diesel. Bolt holes measure 3 8 inch in diameter, and center to center of bolt hole spacing is 2 3 4 inches. Sold and Priced as Each. (Part No: EAF8255A)$0.83

Thermostat with Gasket - This is a 160 degree Thermostat with Gasket. It is used on Ford Compact models 1000, 1500, 1600, 1700, 1900, 1910, 2110. Also used on Skid Loaders CL45, CL55. Replaces part numbers SBA145206011, 83932808, SBA145206010, 83920279 (Part No: SBA145206011)$22.47

Water Outlet Housing - Housing, Water Outlet Connection. For 2000, 231, 233, 2600, 3000, 333, 335, 3600, 3900, 4000, 4100, 420, 4600, 5000, 515, 531, 532, 535, 5600, 5700, 6600, 6700, 7000, 7600, 7700. (Part No: C7NN8594B)$11.42

Water Pump - Water pump includes 4 1 2 inch pulley. Replaces DHPN8A513A, 8508BB, E1NN8A513G, SW01640, 839120, 83912463. Includes gasket. For models 9000 and 9600. Verify OEM part numbers. Includes gasket. (Part No: E1NN8A513G)$120.06

Water Pump - Water Pump with single groove threaded pulley, less rear housing. For 5110, 5610, 5910, 6410, 6810, 7610, 7710 (Part No: FAPN8A513HH)$78.18

Water Pump - For tractor models 1500 AFTER 10 1979, 1700, 1900. Includes backing plate and gasket. Replaces: 83926846, 87764987, 87764988, Casting # M712, SBA145016070, SBA145016071, SBA145016120 (Part No: SBA145016071)$78.65

Water Pump - For a 1710. Can also be used for a 1510 if the original back plate is reused. Water pump with pulley. O-ring part# SBA052300250 NOT included (available from dealer only). (Part No: SBA145016510)$86.94

Water Pump - For model 1510. Water Pump also replaces SBA145016440. (Part No: SBA145016500)$216.96

Water Pump - For tractor models (1120, 1215, 1220 from 1987 and up), (1210, 1310 from 1983 and up). (Part No: SBA145017300)$101.90

Water Pump - For tractor models 5640, 6640, 7740, 7840, 8240, 8340, TS100, TS110, TS90. With serpentine pulley. Will not fit models equipped with Mando Air Conditioning. Pulley diameter is 140 mm. Replaces 87801112, F0NN8501CC. (Part No: 87800712)$163.34

Water Pump - For tractor models 5640, 6640, 7740, LS190, LX985. Replaces F0NN8501DC, F0NN8501DB. With serpentine pulley, Will not fit models equipped with Mando Air Conditioning. Pulley diameter is 147 mm. (Part No: 87800714)$151.73

Water Pump - Fits Ford New Holland models: 8160, 8260, 8360, 8560, TM115, TM125, TM135, TM150, TM165 (Part No: 82847714)$151.73

Water Pump - For tractor models 1320, 1520, 1620, 1715. (Part No: SBA145016780)$90.27

Water Pump - For FORD Tractor Models 3010S, 3830, 4230, 4330V, 4430, 4835, 5530, 5635, 6530, 6635, 7635, LB75, LB75CP, LM430, LM640, TK76, TK85, TK85M, TL100, TL70, TL80, TL90, TN55, TN55D, TN55S, TN60VA, TN65, TN65D, TN65F, TN65S, TN65V, TN70, TN70D, TN70F, TN70S, TN75, TN75D, TN75F, TN75S, TN75V, TN80F, TN90F, TN95F, TT55, TT75. (Part No: 99454833)$110.33

Water Pump - Ford: Water Pump for tractor models TB90, TB10, TB110. (Part No: 87803008)$162.41

Water Pump - With pulley. For tractor models 1200 and 1300 with a 6 blade fan. Has a 1 1 8 inch pilot hole. Order O-Ring part number SBA052300450 if needed. (Part No: SBA145016191)$68.81

Water Pump - For Ford Tractors with Mando Air Conditioning Compressor. 6640, 7740, 7740O, 7840, 7840O, 8240, 8340. Replaces original part number 87840257. (Part No: 87840257)$220.80

Water Pump - This new water pump is for models 8670, 8670A, 8770, 8770A, 8870, 8870A, 8970, 8970A. Also replaces 87801873. (Part No: 87800490)$151.80

Water Pump - This water pump comes with gasket, without backplate. It is completely new, from the seal to the housing. It fits multiple Ford New Holland Tractor models. TB120, 7810 (2-1-88 >), 7810S (1-1-94 >), 8010 (After Serial Number 800001M). Replaces EJPN8A513BA, EJPN8A513BA, VPE1038, 81863835, 83926130, 83961310, SW06499 (Part No: FAPN8A513CC)$128.05

Water Pump - Water Pump with single pulley and backplate. For the following models: 4610N (Latin America), 4830, 4830N, 4830O, 5030, 5030O (all made before 7-1-90 >), 5110, 5610, 6410, 6610, 6610O, 6710, 6810, 7410, 7610, 7610O, 7710 (all made 8 87 thru 10 88). Replaces E6NN8501HA, E6NN8501HB, E6NN8501HC, E6NN8501HD, E8NN8501BB, E8NN8501BC, VPE1106, 81862767, 81872275, 81872278, 83960873. (Part No: 87800119)$121.53

Water Pump - Pump comes with threaded double pulley, and includes pump and housing gaskets. For the following models with diesel engines: 5110(W 4 CYL, 5 84-10 91), 5610, 6610, 6710, 6810(W 4 CYL, 4 89-10 91), 7010, 7410, 7610, 7610O(W 4 CYL, 10 81-12 91), 7710(11 88 thru 2 99). Replaces 81863830, E7NN8501FB, 8513FB , E7NN8501FC, E7NN8501FD, E7NN8501FE, AFAPN8A513AA, EJPN8A513FB, FAPN8A513AA, 83964037. (Part No: 87800123)$119.09

Water Pump - For Dexta, Super Dexta with Perkins diesel. Comes with pulley & gasket. (Part No: 957E8501B)$109.71

Water Pump - For tractor models 340A, 340B, 345C, (4500 diesel), (540, 550, 555, 555A, 555B, 3930, 4000, 4130, 4600, 4610H all with BSD333 engine), (2000, 2600, with BSD326 engine), (3000, 3600, 3900 with BSD329 engine), 3230, 3430, 3910H with BSD332). Water Pump with Single Pulley, Back Housing and Gasket. Replaces 87800115, C5NE8501A, C5NN8501A, D3NN8501A, D5NN8501E, D8NN8501CA, D8NN8501UA, D8NN8501UB. (Part No: D8NN8501UC)$57.86

Water Pump - This water pump comes with a dual belt pulley. For 340A, 340B, 420, 445, 445A, 450, 515, 535, 540, 540A, 545, 545A, 555E, 6500, 750, 2600, 3600, 4600, 5600, 6600, 6700, 7600, 7700, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 6610, 6710, 6810, 7410, 7610, 7710 (1 1981-10 1988). Replaces EGPN8A513CA, FAPN8A513DD. Water Pump with Dual Pulley & Gasket. The proper fan for this pump is part number D9NN8600AA. Bolt pattern on the hub for the pulley is 2.5 inches center-to-center across. (Part No: EAPN8A513E)$80.93

Water Pump - For tractor models 8N, 9N, 2N. Comes with pulley, rear cover plate and gasket. Pulley will accommodate a 1 2 inch or 5 8 inch belt. Replaces 8N8501A, CDPN8501AGV, CDPN8501A. (Part No: CDPN8501A)$41.14

Water Pump - For NAA, Jubilee. Comes with Rear Cover Plate and Gasket. Replaces Part number CDPN8501B. (Part No: S.60663)$52.18

Water Pump - Comes with Hub and mounting gasket. For tractor models: Major, Power Major, Super Major - 220 CID Engine Except With Power Steering. Replaces E1ADKN8501B, DKN8501AB (Part No: DKN8501AB)$45.40

Water Pump - This Water Pump comes with Single Groove Pulley and Gasket. Does not come with back housing. Comes with back housing gasket. Replaces FAPN8A513GG. For 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5710, 5610, 6610, 6710, 7610, 7710. Also replaces FAPN8A513GG. Uses Fan blade with 2-1 2 inch bolt spacing center-to-center. (Part No: EAPN8A513F)$48.56

Water Pump By-Pass Hose - This Water Pump By-Pass Hose has a 0.540 inch inside diameter. It us used on numerous Ford New Holland Compact Tractors. It replaces part numbers 87780789, 87772767, 83938274, SBA145537020, SBA145536050, SBA145536380, 83966732 (Part No: SBA145536051)$6.54

Water Pump, Complete - This is a complete Water Pump with the Front and the Back. The Front only, is available as part number FAPN8A513LL. This pump is for models TW15, TW25, TW35, TW5, 7810, 7910, 8210, 8530, 8630, 8730. Comes with gasket and single pulley. (Part No: E6NN8501AC)$247.27

Water Pump Cover plate Gasket - Tractors: 8N, 9N, 2N (Part No: 9N8507)$.68

Water Pump Cover Plate Gasket - This pump cover plate gasket is for all 4-cylinders 1953-1964. Price is for each. (Part No: EAF8507B)$2.00

Water Pump, Front Only - This Water Pump is the Front only. The complete water pump is available as part number E6NN8501AC. This pump is for models TW15, TW25, TW35, TW5, 7810, 7910, 8210, 8530, 8630, 8730. Comes with gaskets and single pulley. Replaces EAPN8A513G, EAPN8A513SG, EGPN8A513BA, VPE1036, 81863921, 83926007, 83956957, 8508, SW03757, SW1863921, 1863921, 81872282, 87295223 (Part No: FAPN8A513LL)$85.01

Water Pump Gasket - Used on multiple Ford models built 1965 and later. Replaces original part numbers D6NN8507A, E5NN8507AA, E5NN8507AB, C5NE9513A. (Part No: E5NN8507AB)$1.01

Water Pump Gasket - Used on multiple Ford models built 1965 and later. Replaces original part numbers D6NN8507A, E5NN8507AA, E5NN8507AB, C5NE9513A. (Part No: E5NN8507AB)$1.01

Water Pump Gasket - Used on multiple Ford models built 1965 and later. Replaces original part numbers D6NN8507A, E5NN8507AA, E5NN8507AB, C5NE9513A. (Part No: E5NN8507AB)$1.01

Water Pump Gasket - This is the Water Pump to Pump Housing Gaskets used in Ford New Holland equipment, 1965 and later. It replaces original part numbers 83959398, E6NN8513AA. (Part No: E6NN8513AA)$1.11

Water Pump Gasket - This is the Water Pump to Pump Housing Gaskets used in Ford New Holland equipment, 1965 and later. It replaces original part numbers 83959398, E6NN8513AA. (Part No: E6NN8513AA)$1.11

Water Pump Gasket - This is the Water Pump to Pump Housing Gaskets used in Ford New Holland equipment, 1965 and later. It replaces original part numbers 83959398, E6NN8513AA. (Part No: E6NN8513AA)$1.11

Water Pump Gasket - Used on Perkins 144 and 152 cubic inch, three cylinder engines. Replaces 957E8507, 72080255, 0941183, 731275M1, 4222931M1 (Part No: 4222931M1)$1.61

Water Pump Hose to Cyl. Block - For tractor models Dexta, Super Dexta. Replaces: E5CJ9, 732443M1, 747939M91 (Part No: 81716946)$6.67

Water Pump Kit - This water pump repair kit is for tractor models 8N, 9N, 2N, NAA, Jubilee (Part No: CPN8591B)$51.05

Water Pump Kit - Repair kit. For tractor models Dexta, Super Dexta. (Part No: E158Z9)$58.47

Water Pump Kit - This water pump repair kit is for Water Pump CDPN8501C used on 4 cylinder gas engines on tractor models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. Kit includes gasket and all parts necessary to rebuild pump. Replaces all moving parts. Replaces FPN8591A. (Part No: CPN8591B)$51.05

Water Pump Mounting Gasket - Gasket, Pump rear to Cylinder Block. Tractors: 8N, 9N, 2N. (Part No: 9N8513)$2.37

Water Pump Mounting Gasket - Gasket, water pump rear to cylinder block. Tractors: All 4-cyl, 1953-1964. (Part No: EAF8513A)$0.96

Water Pump, New - This is a new water pump. Comes with backing plate and gasket. Used on 1530 Compact Tractor, 1630 Compact Tractor, 1725 Compact Tractor, MC28 Mower, TC25 Compact Tractor, TC25D Compact Tractor, TC29 Compact Tractor, TC29D Compact Tractor. Replaces SBA145017660, 87778871, SBA145017661, F17661N, SW14216. (Part No: SBA145017661)$105.67

Water Pump, New - Used on Ford New Holland compact models: 1925, Boomer 3040, Boomer 3045, Boomer 3050, Boomer 4055, L140, L150, L160, L170, L465, L565, LS140, LS150, LS160, LS170, LX465, LX485, LX565, LX665, T1510, T1520, T2210, T2220, T2310, T2320, T2410, T2420, TC30, TC31DA, TC33, TC34DA, TC35, TC35A, TC35DA, TC40, TC40A, TC40DA, TC45, TC45A, TC45DA, TC48DA, TT45A, TT50A, this water pump replaces OEM numbers SBA145017790, SBA145017670, 87763372, SBA145017720 (Part No: SBA145017730)$106.44

Water Pump O-ring - This is the sealing o-ring used with SBA145016191 water pump. (Part No: SBA052300450)$3.12

Water Pump Pulley - Single groove. For tractor models 1910, 2110, 2120. (Part No: SBA145336570)$53.16

Water Pump Pulley - For tractor models 9N, 2N. (Part No: 9N8606)$36.86

Water Pump Pulley, Single Groove - For tractor models NAA, Jubilee. Single Groove Water Pump Pulley. (Part No: EAF8509A)$28.84

Water Pump Repair Kit - For tractor models Major, Power Major, Super Major. (Part No: E1ADKN8591)$45.73

Water Pump Repair Kit - This water pump repair kit includes impeller, shaft seal, bearing assembly, bolts, and pulley. For tractors TM120, TM130, TM155, TM175, TM190. (Part No: 87802496)$235.00

WATER PUMP REPAIR KIT - Water pump repair pump. Kit includes: impeller, shaft seal, bearing assembly, bolts, pulley. Tractors: TM115, TM125, TM135, TM150, TM165. (Part No: 87801641)$175.19

Water Pump Repair Kit, with 2 Impellers - For tractor models 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110. Replaces FBPN8591B. (Part No: FBPN8591A)$114.50

Water Pump Replacement Kit - This water pump replacement kit includes CDPN8501B water pump with gasket, NAA8260B upper hose, 312588 lower hose, 8N8620 fan belt (for generators or alternators), 4 hose clamps, and clamp key. This kit is used on Jubilee and NAA tractors 1953-54. (Part No: 119844)$70.88

Water Pump Replacement Kit - This water pump replacement kit includes 957E8501B water pump with gasket, S.66632 five-piece hose set, E1ADKN8620C fan belt, 10 hose clamps, and clamp key. This kit is used on Fordson Dexta tractors, 1958-1961, with Perkins 3 Cylinder Diesel Engines. (Part No: 119847)$146.21

Water Pump Replacement Kit - This water pump replacement kit includes 957E8501B water pump with gasket, S.66633 five-piece hose set, E1ADKN8620C fan belt, 10 hose clamps, and clamp key. This kit is used on Fordson Super Dexta tractors, 1962 - 1964, with Perkins 3 Cylinder Diesel Engines. (Part No: 119848)$151.73

Water Pump Sealant - RTV Blue 3.35 oz. tube. (Part No: PRM77BR)$8.45

Water Pump to Engine Gasket - Used with SBA145016061 Water Pump. It replaces SBA145996020, 87351943 (Part No: 87351943)$4.47

Water Pump - uses Bolt-On Pulley - This water pump uses the bolt on style pulley, which does not come with the water pump and is not available. For tractor models 600, 601, 700, 701, 800, 801, 900, 2000, 4000 - 172 inch industrial gas and diesel engines (Part No: DCPN8501A)$57.15

Water Pump with Back Plate - This Water Pump includes back plate and back plate to block gasket. For tractor models (1910, 2110 1983 and up), (2120 1987 to 2 1999). Replaces part number SBA145016540 (Part No: SBA145016540WBP)$81.42

Water Pump with Gasket - Includes Gasket. For tractor models (1910, 2110 1983 and up), (2120 1987 to 2 1999). This Pump does not have the back plate or back plate to block gasket. (Part No: SBA145016540)$79.02

Water Pump, with Gasket - For tractor models 3010S, (3830, 4430 Orchard), 3435, 3935, 4135. (Part No: 98497117)$126.04

Water Pump with Hub - New, with Gasket. For tractor models (1720, 1920 and 3415 all 1987 and up), 2120 (1999 and up). (Part No: SBA145017780)$62.65

Water Pump with Hub - Water pump with Hub. Fits 1100, 1200, 1300 with 4 Blade Fan. Replaces SBA145016201. Uses SBA052300450 O-ring, sold separately. (Part No: SBA145016201)$86.07

Water Pump with Oring - This Water Pump This water pump is completely new, from the seal to the housing and fits multiple New Holland models. Replaces J804927, 3286293, J940052, 87400267 (Part No: 87308650)$66.17

Water Pump - with Press-On Pulley - This water pump with press on style pulley replaces OEM CDPN8501C. This water pump comes with the pulley and is for tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 - gas and diesel engines. Comes with rear cover plate and gasket. For tractor models with press on pulley. USES 3 BLADE FAN PART number NCA8600S or NCA8600B 6 Blade Fan Uses 4 1 4 inch mounting bolts on a 3 1 4 inch circle. (Part No: S.60627)$49.74

Water Pump with Pulley - For tractor models 1000, 1600. Replaces SBA145016022. Comes with backing plate and gasket. (Part No: SBA145016061)$87.59

 
Decals and Emblems
Data Plate - Patent Data Plate, with drive screws to install. Restoration Quality. For tractors: 9N, 2N, {1939-1947}. (Part No: 9N14001)$6.05

Decal - For model 1700. Mylar Hood Decal ONLY. (Part No: F1700)$22.50

Decal - This decal set has 2 self adhesive stickers. For 3000 to 1968. These are printed on Mylar, not die cut. (Part No: R0508)$22.50

Decal - This decal set contains 2 self adhesive stickers. For 2000 up to 1968. These are printed on Mylar, not die cut. (Part No: R0506)$22.50

Decal, Fear This Ford - 12-1 2 inches x 3 inches. For all Ford tractors. (Part No: S.67825)$14.10

Decal , Fender Set - For 8N, 9N, 2N. Each decal is approximately 8-3 4 inches wide by 3-1 4 inches tall. Fender Decals (2) Red Ford Script. (Part No: R2006)$15.00

Decal Set - Decal set for Ford 600 Series. Order Workmaster or Powermaster hood set separately. For tractor models 601, 640, 641, 661 series tractors. Does not include "Workmaster" or "Powermaster" decals. (Part No: R4666)$40.50

Decal Set - For model 2000 gas 1968-1975. (Part No: S.66683)$58.10

Decal Set - Complete Mylar decal set for models 801, 841, 851, 861. Set contains decals for: fuel cap warning, dual valve, battery, air cleaner, draft control, upper link, PTO warning, fender script (2), hood side (2 red powermaster), numbers inserts 801, 841, 851, 861, (2 each black), service decal for under fuel door, instructions. (Part No: D8015862)$57.48

Decal Set - Hood Only Black and Red Ford 1910 Decal Set. (Part No: S.12099)$95.44

Decal Set - Ford 541 Offset Workmaster: Set Of 2 Mylar Decals (Part No: DEC362)$21.00

Decal Set - Ford 601 Series for model years 1958, 1959, 1960, 1961 and 1962. 20 Piece Mylar Decal Set (Part No: DEC445)$60.00

Decal Set - For model 2000, this is a set of 6 self adhesive decals. These are printed on Mylar, not die cut. (Part No: R0507)$22.50

Decal Set - For Ford 641 WorkMaster. This is a set of 2 self-adhesive decals. These are printed on Mylar, not die cut. (Part No: R4123)$22.50

Decal Set - For the Ford 901 Select O Speed. This is a set of 2 decals. These are printed on Mylar, not die cut. (Part No: R4133)$25.99

Decal Set - For the Ford 701 Power Master. This is a set of 2 self-adhesive decals. Photo is dim because decals have masking that is removed at installation. These are printed on Mylar, not die cut. (Part No: R4125)$25.99

Decal Set - Hood only set for the Ford 841 Power Master. This is a 2 piece set. These are printed on Mylar, not die cut. (Part No: R4128)$25.99

Decal Set - For Ford 901 Power Master. Set of 2 self-adhesive decals. These are printed on Mylar, not die cut. (Part No: R4132)$33.75

Decal Set - This decal set contains 6 self adhesive stickers. For 3000 Diesel 1968 and up. These are printed on Mylar, not die cut. (Part No: R0509)$22.50

Decal Set - Hood only For model 2600. (Part No: R0517)$22.50

Decal Set - Hood Only Decal Set for Ford Model 3600, 6 pieces Printed on Mylar. (Part No: R0518)$25.82

Decal Set - Hood Only Decal Set for Ford Model 3610 Force II after 1986, 5 pieces (Part No: R1500)$37.01

Decal Set - Decal Set for Ford Model 5000, 1968 & up, 6 pieces (Part No: R0513)$27.00

Decal Set - Hood only Decal Set for Ford Model 5000, up to 1968, 2 pieces, bot sides. Gray background with Ford in red and 5000 in chrome. (Part No: R0512)$23.62

Decal Set - Combination Vinyl Decal Set For tractor models 8N, 9N and 2N (1939-1952). Set of 10 self adhesive decals. Contains decals for air cleaner, oil filter, position control, PTO warning, hood sides (Red Ford Name 2-1 4 inches x 5-1 4 inches), fenders (Red Ford name 3-1 4 inches x 9 inches) and tachometer. (Part No: R2008)$29.25

Decal Set - Hood only set for Model 661 Workmaster. (Part No: R4124)$18.75

Decal Set - Decal Set for Ford Model 850 (Part No: R4129)$25.99

Decal Set - Hood only set for Model 860. (Part No: R4130)$25.99

Decal Set - Decal Set for Ford Model 861 Power master. Hood only (Part No: R4131)$25.99

Decal Set - Hood only set for Model 961 Power master. (Part No: R4134)$25.99

Decal Set - Hood only 3 piece set for Model 1710. Replaces SBA390113250 (Part No: R1495)$41.78

Decal Set - Blue and white hood only decal set for Ford model 1910 Force II (From 1986) 5 piece. (Part No: R1496)$35.25

Decal Set - Hood only 5 piece set for Model 2110 Force II (From 1986) (Part No: R1497)$45.26

Decal Set - Hood only set for Model 2610, 5pc. (Part No: R0528)$35.25

Decal Set - Hood only 5 piece set for Model 2910 Force II (from 1986). (Part No: R1499)$45.26

Decal Set - Decal for Ford Model 3400. HOOD DECAL ONLY. (Part No: R4135)$23.62

Decal Set - Hood only 5 piece set for 3910 up to 1986. (Part No: R0530)$35.25

Decal Set - Hood only 5 piece set for 3910. Force II. Printed on Mylar. BLACK WITH WHITE LETTERING AND A REDDISH ORANGE STRIPE. (Part No: R1501)$46.50

Decal Set - For 3930. Hood Only. (Part No: R4136)$42.75

Decal Set - For 4100. Hood ONLY Complete 2 piece set. (Part No: R0519)$24.41

Decal Set - Hood only 5 piece set for 4110. (Part No: R0531)$32.93

Decal Set - Hood only 5 piece set for 4110 after 1985, Force II. (Part No: R1502)$37.01

Decal Set - For 4600. Hood Only 4 piece set. (Part No: R0520)$23.25

Decal Set - For 4610. Blue and white hood 5 piece set. (Part No: R0532)$37.01

Decal Set - Hood only 5 piece set for 4610 after 1985. Force II. (Part No: R1503)$45.26

Decal Set - Hood only set for 5030. (Part No: R4137)$40.53

Decal Set - For 5600. Hood only. (Part No: R0522)$24.75

Decal Set - Hood only 5 piece set for 5610 without cab 1981-1986. (Part No: R0533)$37.01

Decal Set - Hood only 5 piece set for 5610 after 1985. (Part No: R1504)$45.26

Decal Set - Hood only 6 piece set for 6600. (Part No: R0523)$30.71

Decal Set - For 6610 with cab 1981-1986. 5 piece set. Replaces EBPN16605KA, 83928796 (Part No: S.8432)$36.86

Decal Set - Hood only 5 piece set for 6610 without cab 1981-1986. (Part No: R0535)$38.59

Decal Set - Hood only 5 piece set for Model: 6610 From 1986. (Part No: R1505)$38.59

Decal Set - Hood only 5 piece set for 6700. (Part No: R0526)$45.36

Decal Set - Hood only 5 piece set for 6710 1981-1986. (Part No: R0539)$50.33

Decal Set - Hood only 5 piece set for 6710 From 1986. (Part No: R1507)$50.33

Decal Set - Hood only 6 piece For 7000. (Part No: R0516)$46.46

Decal Set - Hood only 6 piece set for 7100. (Part No: R0524)$31.62

Decal Set - This decal set is for the Ford 7600. It includes 6 pieces for the hood only. (Part No: R0525)$30.71

Decal Set - Hood only 5 piece set for 7610 with cab, 1985-1986. (Part No: R0538)$42.91

Decal Set - Hood only 5 piece set for 7610 Force II with cab 1981-1986. (Part No: R0537)$46.74

Decal Set - Hood only 5 piece set for Model: 7610 without cab 1981-1986. (Part No: R1506)$38.59

Decal Set - For 7700. Hood only 4 piece set. (Part No: R0527)$45.36

Decal Set - Hood only 5 piece set for 7710 1981-1986. (Part No: R0572)$40.74

Decal Set - Hood only 5 piece set for 7710 From 1986. (Part No: R1508)$52.10

Decal Set - Hood only 5 piece set for 7910 1984-1986. (Part No: R1494)$42.91

Decal Set - For 8000. HOOD ONLY decal set. (Part No: R4138)$44.66

Decal Set - For 8N, 9N, 2N, all 1939-1947. Decal set for the Air Cleaner, Oil Filter Position (2) and PTO Warning. (Part No: FO1)$11.25

Decal Set - Hood only set for 8210, 1981-1986. 5 Piece Set. (Part No: R0585)$55.34

Decal Set - Hood only set for 8210, after 1986. 5 Piece Set. (Part No: R1510)$50.33

Decal Set - Hood only set for 8600. 6 Piece Set. (Part No: R4139)$44.16

Decal Set - Hood only set for 8700. (Part No: R4140)$51.00

Decal Set - For 9600. Hood only Decal Set. (Part No: R4141)$45.36

Decal Set - Hood only set for 9700. (Part No: R4142)$45.36

Decal Set - Hood only set for TW10. Blue and White. (Part No: R4143)$64.50

Decal Set - For TW15. Hood ONLY. Black and Red Decal Set, includes white "TW15". (Part No: R4144)$64.50

Decal Set - Hood only set for TW20. Blue and White. (Part No: R4145)$64.50

Decal Set - For TW25. Hood Only. Black and Red Decal Set. (Part No: R4146)$64.50

Decal Set - Hood only set for 2750. (Part No: R3772)$43.17

Decal Set, 60-68 Gas - Hood Set for Ford Model 4000, up to 1968, 2 pieces (Part No: F503HA)$22.50

Decal Set, 62-64 Gas - Complete decal set for 1962-1964 Gas 4000 minus the Shift Pattern decal. Shift Pattern is sold separately. (Part No: S.67696)$56.52

Decal Set, 68-75 Diesel - Complete set except for Shift Pattern. For model 4000 diesel 1968-1975. (Part No: S.66692)$57.70

Decal Set, 68-75 Gas - Complete 15 piece set. For model 4000 gas 1968-1975. (Part No: S.66691)$53.42

Decal Set, 68-75 Gas - Hood set for Ford Model 4000, 1968 and up, 6 pieces. (Part No: F503HB)$22.50

Decal Set, Blue & White - Set of 2 "SU" Decals. For tractor models 4000SU, 4600SU. (Part No: S.67554)$18.21

Decal Set, Complete - This complete decal set is for the Ford 800 Series. For model 800. (Part No: R4667)$40.50

Decal Set, Complete - Ford 3000 decals set. For model 3000 gas 1968-1975. DOES NOT INCLUDE SHIFT PATTERN (Part No: S.66687)$54.92

Decal Set, Complete - For model : 3000 diesel 1968-1975. DOES NOT INCLUDE SHIFT PATTERN (Part No: S.66688)$54.95

Decal Set, Complete - 10 Decals per set. For model 5000 Diesel 1968-1975. Does not contain Shift Pattern Decal. (Part No: S.66693)$57.95

Decal Set, Complete - For tractor models NAA, Jubilee. (Part No: R4665)$30

Decal Set, Complete - Hood decals are vinyl cut. For model 900. (Part No: R4668)$44.57

Decal Set, Hood - For model 1900. (Part No: F1900)$22.50

Decal Set, Hood - For model 9000. (Part No: R4676)$77.96

Decal Set, Hood - For model 7840. (Part No: R4675)$57.41

Decal Set, Hood - For model 7740. (Part No: R4674)$57.41

Decal Set, Hood - For model 6640. (Part No: R4673)$57.41

Decal Set, Hood - For model 971 with Select-O-Speed. (Part No: R4672)$49.61

Decal Set, Hood - For model 871 with Select-O-Speed. (Part No: R4671)$49.61

Decal Set, Hood - For model 771 with Select-O-Speed. (Part No: R4670)$49.61

Decal Set, Hood - For model 601 with Select-O-Speed. (Part No: R4669)$49.61

Decal Set, Hood - For model 2000 with Jubilee style sheet metal. (Part No: R5196)$22.50

Decal Set, Hood - For model 4000 with Jubilee style sheet metal. (Part No: FJUB4000)$22.50

Decal Set, Hood - For model 5000 with Jubilee style sheet metal. (Part No: R5199)$23.62

Decal Set, Hood - For model 1215. (Part No: R5201)$30.71

Decal Set, Hood - For model 1220. (Part No: R5202)$30.71

Decal Set, Hood - For model 1310. (Part No: R5203)$30.00

Decal Set, Hood - For model 1500. (Part No: R5204)$23.62

Decal Set, Hood - For model 1510. (Part No: R5205)$30.71

Decal Set, Hood - For tractor models 1720. (Part No: R5208)$30.71

Decal Set, Hood - For model 2310. (Part No: R5210)$37.01

Decal Set, Hood - Black and red, mylar. For model 2810. (Part No: R5211)$37.01

Decal Set, Hood - For model 8630. (Part No: R5212)$65.92

Decal Set, Hood - For model TW30. (Part No: R5214)$63.08

Decal Set, Hood - For model TW35. (Part No: R5215)$63.08

Decal Set, Hood - This Mylar Hood decal set is Blue and white. For Model 2110. (Part No: R5341_)$35.25

Decal Set, Hood - This Mylar hood decal set is for model 1210. (Part No: R5340)$30.71

Decal Set - Hood Only - This Mylar Decal Set is a Hood Set for a Ford 1000. (Part No: R7169)$23.25

Decal Set - Hood Only - this 2 piece Hood Only Decal set if for the Ford 601 Workmaster. This is a set of 2 Self-adhesive decals. Dim photo because decal has meshing that is removed during installation. These are printed on Mylar, not die cut. (Part No: R4121)$23.25

Decal Set, PowerMaster - For the Ford 801 Power Master. This is a set of 2 self-adhesive decals. These are printed on Mylar, not die cut. (Part No: R4126)$33.75

Decal Set, Red & White - Set of 2 "SU" Decals. For tractor models 4000SU, 4600SU. (Part No: S.66826)$13.32

Decal Set, Select O Speed - For the Ford 801 Select O Speed. This is a set of 2 self-adhesive decals. Photo is dim because decals have masking that is removed at installation. These are printed on Mylar, not die cut. (Part No: FO801)$24.75

Decals, Hood Set - For tractor models 8N, 9N, 2N, 1947-1952. Hood Decals (2) Red Ford Script. (Part No: R2005)$12.00

Decals, Hood Set - For model 4400. (Part No: F4400)$32.48

Emblem Bracket - For Part number 312718. Replaces C0NN16600BR (Part No: 312741)$6.38

Ford 501 Offset Workmaster - Ford 501 Offset Workmaster: Mylar Decal Set. (Part No: DEC388)$21.00

FORD Lettering for Grill - These 1 7 8 tall Vertical Letters for Grill part number C3NN8200A and C3NN8200A. For ford 2000 and 4000 1962-1964, (2000, 3000, 4000, 5000, all 1965-1 1971). (Part No: 86514060)$27.75

Ford Script Painting Mask - This Ford script painting mask set includes 2 smaller 7-1 4 inch x 1-3 4 inch and 2 large 9 inch x 3 inch Ford script painting masks for tractor models: (NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960 1953-1957). Application instructions included. Note: the picture is to demonstrate what your finished result will look like it is not a picture of the mask itself. (Part No: S.67163)$18.75

Ford Script Painting Mask - Includes 1 small 5-3 8 inch x 2-1 4 inch, and 1 large 8-5 8 inch x 3 inch painting masks. For model 8N. Application directions included. Note: the picture is to demonstrate what your finished result will look like it is not a picture of the mask itself. (Part No: S.61441)$21.60

Front Emblem - Fits Fordson Major. (Part No: E1ADKN8212C)$28.23

Front Emblem - For model 900. (Part No: NDB16600A)$48.30

Front Emblem - Restoration quality with studs & retaining clips. Chrome, gold and red. For tractor models 801, 901 (58-62) (Part No: 311232)$69.95

Front Emblem - Chrome plated copper coated alloy. For model Fordson Dexta 1957-10 1960. (Part No: 957E8213A)$162.12

Grill Emblem - This Ferguson System Grill Emblem was used between 1939 and 1947. Replaces original part number 9N8215 (Part No: 9N8215)$24.95

Grill / Steering Wheel Emblem - This new Emblem is used on 1962-1964 Ford 6000 Commander as a front grill or steering wheel Emblem. Replaces: C0NN16600A, C5NN3A515A. Includes mounting hardware. (Part No: C0NN16600A)$59.95

Hood Decals - Ford 640: Mylar Hood Decals, Pair (Part No: DEC333)$12.75

Hood Decals - Ford 650: Mylar Hood Decals, Pair (Part No: DEC334)$12.75

Hood Decals - This is a Mylar decal set for the Ford 661 Workmaster tractor. (Part No: DEC405)$25.00

Hood Decal Set - For Ford 1100. Hood Decal Set only - 2 Pcs. (Part No: F1100VC)$44.93

Hood Decal Set - This pair of hood decals is mylar and for the model 1300. (Part No: F1300VC)$29.25

Hood Decal Set, 62-64 Gas - Hood Set 2-Piece for 4000. (Part No: FJUB4000)$22.50

Hood Emblem - For NAA. Just like original Hood Emblem. (Part No: C0NN16600)$51.23

Hood Emblem - For Industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4030, 4040, 4130, 4140. Metal back, 5 7 8 inch outside diameter. Replaces: 312718, C0NN16600E, C0NN16600F. Bracket available as part number 312741. (Part No: 312718)$85.91

Hood Emblem - Two piece emblem set says "Ford" and "Ferguson System", includes 355870-S speed nuts. Cast aluminum, dull finish with black outline and lettering. For tractors 9N & 2N. (Part No: 2N16600)$23.61

Hood Emblem - 8N (bright metal with red enamel background). (Part No: 8N16600A)$40.49

Hood Emblem - Restoration quality with studs and retaining clips. For tractor models 501, 601, 701. Chrome, Gold and red. (Part No: 311231)$64.95

Hood Emblem - 600 (bright metal with red background). Just like original. Licensed by Ford. (Part No: NCA16600A)$52.11

Hood Emblem - This hood emblem is for the 800 Series (bright metal with red background) (Part No: NDA16600A)$50.59

Hood Emblem - This is a New Ford Hood Emblem Blue with Chrome. Ford 1939 - 1942. Replaces Original Part Number 9N16600S (Part No: 9N16600S)$26.21

Hood Emblem - 8N One piece emblem. Cast aluminum, dull finish with red outline and lettering. (Part No: 8N16600B)$18.75

Hood Emblem for Jubilee - For Golden Jubilee Model. Just like original (Part No: NAA16600A)$48.53

Hood Emblem, Front - Chrome plated. For model Fordson Super Major. (Part No: S.67278)$175.67

Hood Emblem, Side - Chrome plated Side Hood Emblem. For Major. (Part No: S.67273)$162.12

Hood Emblem, Side - Chrome plated. For model Fordson Power Major. (Part No: S.67276)$117.69

Hood Emblem, Side - Chrome plated. For model Fordson Super Major. (Part No: S.67277)$150.93

Hood Emblem, Side - Chrome Plated. For model Fordson Major. (Part No: S.67275)$117.69

Hood Ornament - For tractor models (2000, 4000 4-cylinder 1962-1964). (Part No: C3NN16B748A)$64.50

Plate - Patent Data Plate, with drive screws to install. For tractors: 8N, {1948-1952}. (Part No: 8N14001)$6.50

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Part No: SHERMAN)$17.89

Shift Pattern Decal - For tractor models 2000, 3000 both 8 speed with live PTO. (Part No: C5NN7B292FY)$9.71

Shift Pattern Decal - For tractor models 4000, 4600 with 8 speed transmissions. (Part No: C5NN7B292FN)$9.80

Shift Pattern Decal - For tractor models 5000, 7000 with 8 Speed Transmissions. (Part No: D3NN7B292B)$9.51

Shift Pattern Decal - For tractor models 2000, 3000 with 4 speed transmissions. (Part No: S.67192)$9.15

Shift Pattern Decal - For tractor models 2000, 3000, 2600, 3600 all with 6 speed transmissions. (Part No: S.67193)$9.51

 
Drive Train
3rd Gear - This is 3rd Gear in a 5 speed Transmission, 1958 and up. It replaces original part number NDA7137A. (Part No: NDA7137A)$165.78

6 Speed Transmission Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application & availability. (Part No: SPX_F5_1)$0.00

Axle - Rear Axle 8N, NAA, Jubilee. Total length is 32.25 inches. (Part No: 8N4235C)$157.98

Axle Bearing Assembly - For tractor models: 8N, 9N, 2N, NAA, Jubilee. This includes rear axle bearing (2N4221) and cup (9N4222). (Part No: S.18516)$41.42

Axle Bearing Cup - Tapered Cup. For tractor models 2000, 3000, Dexta. (Part No: E19EB9)$23.39

Axle Collar - This axle collar measures 2 3 4 inches outside diameter, 2 inches inside diameter and 11 16 inches thick. For tractor models 9N, 2N. (Part No: 9N4132)$11.24

Axle Collar - This Axle Collar is used on Dexta and Super Dexta tractors. It replaces part number 957E4132. (Part No: 180596M1)$10.79

Axle Nut - 1.25 inch, 18 hex. For tractor models (8N 1948-1953), (NAA, Jubilee 1953-1955), NAB. (Part No: 8N4179)$8.09

Axle Nut and Snap Ring - Kit, Nut and Snap Ring. For tractor models 8N, NAA. 1-1 4 inch - 18 Threads per inch. (Part No: CBPN4179A)$12.98

Axle Nut, Clamp Lock Type - Clamp Lock Nut, rear axle, 1-1 4 inch. For 8N, NAA, Jubilee. This improved nut helps to prevent premature wear on both axle and hub. (The ring on the original type can fall out or rust out which allows the nut to come loose). This nut stays tight! Replaces CBPN-4179-A and 8N4187. (Part No: LN10-21)$25.28

Axle Nut Lock Ring - For 8N 1948-1953, Jubilee and NAA. Snap Ring. Priced each. (Part No: 8N4187)$2.22

Axle Oil Seal Gasket, Inner - For 8N 1948-1950. Used between A8NN4251A Seal & Retainer in Oil seal assembly. Price is for each. (Part No: 8N4290)$1.29

Axle Oil Seal-Outer, Pack of 2 - For tractor models 8N to serial number 486753. inside diameter 2 3 4 inch. Rear Axle Oil Seals. Also comes as part of A8NN4248A Assembly. (Part No: A8NN4251A)$15.57

Axle Outer Retainer - For model 8N to serial number 486753. Rear Axle Outer Retainer. These retainers come with seals and gaskets. Order Quantity of 1 for a set of 2. (Part No: A8NN4248A)$15.23

Axle Outer Retainer Gasket - Requires 2. For tractor models 8N 1948-1950. (Part No: 8N4225)$3.75

Axle Rear Bearing Race - This Tapered Bearing Cup is for models 4120, 600, 800, 8N, 9N, 2N, Jubilee, NAA. (Part No: 9N4222)$14.38

Axle Rear Collar - This rear axle collar is for tractor models 600, 800, 601, 801, 2000, 4000. (Part No: NCA4132A)$14.03

Axle Seal, Inner Pair, Pack of 2 - This is a pair of seals. These seals measure 2.000 inches inside diameter, 2.754 inches outside diameter, and are 0.510 inches wide. The seal replaces OEM numbers: 8N4233A, C4NN4233A, NCA4233A, NDA7048A, 8N4233A1, 1014202M1, 103682A, 103682A, 10A12051, 10A2500, 12A2500, 30-3084914, 1E3377, E3377, 103682A, 10A12051, 157166A (Part No: 8N4233A)$4.58

Axle Seal, Outer Pair - For tractor models 8N serial number 486753 and up, NAA, Jubilee. Comes in pairs. 3-3 4 inch outside diameter, 2-7 8 inch inside diameter. (Part No: D5NN4115A)$8.76

Axle Shaft Gasket - For tractor models 8N, NAA, Jubilee all 1948-1954. Inside diameter 1 15 16 inches, outside diameter 2 3 16 inch. These were originally made of cork and all replacements are made from rubber. These must be replaced when the axle seals are replaced. (Part No: 8N4284)$2.39

Axle Shaft Seal - Seal and Retainer Assembly, Outer, for Rear Axle Shaft. For tractor models 3250C, 260C, 2810, 2910, 3055, 335, 340, 340A, 340B, 345C, 345D, 3550, 3900, 3910, 4000, 4100, 4110, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4610, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 555C, 555D, 575D, 655C, 655D, 675D. Replaces 83999828, C5NN4969B, C5NN4969D, 81819097, 81809097, 81875227, 81859537, F2NN4969AA, E0NN4969AA (Part No: C5NN4969D)$15.95

Axle Shaft Seal - Seal and Retainer Assembly, outer, for Rear Axle Shaft. For tractor models 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: C5NN4969E)$16.31

Axle Washer - Axle washer is for model 8N. 1 1 4 inch Id X 2 3 8 inch Od X .20 Thick. (Part No: 8N4293)$4.79

Ball Bearing - Bearing is used as the syncro sliding gear shaft front bearing on 1310, 1510, 1710 Tractors. Measures 1.181 inch inside diameter, 2.440 outside diameter and 0.629 wide. Replaces 210064, 9N715B, 9N715BC, 9N715C, SBA040106206 (Part No: 9N715BC)$4.76

Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Part No: C5NN7127B)$24.55

Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Part No: C5NN7127B)$24.55

Bearing Cone - This differential Bearing cone is for tractor models 4120, 800, 801. (Part No: NDA4221A)$32.25

Bearing Cone, Rear Axle - This rear axle outer bearing cone is for tractor models 2120, 4120, 600, 800. (Part No: NCA44224A)$69.43

Bearing Cone, Rear Axle - For 4000, 4100, 4110 4600, 4610. (Part No: C5NN4N221B)$18.70

Bearing Cone, Rear Pinion - This is a rear pinion tapered bearing cone. (Part No: NCA4630A)$71.75

Bearing Cone, Rear Pinion - This is a rear pinion tapered bearing cone. (Part No: NDA4630A)$63.74

Bearing Cup - This differential bearing cup is for tractor models 800, 801, 4000, 2000. (Part No: NDA4222A)$23.62

Bearing Cup - This rear pinion tapered bearing cup is for tractor models 3500, 4120, 800, 801. (Part No: NDA4628A)$13.08

Bearing Cup - This rear pinion tapered bearing cup is for tractor models 2120, 4120, 600, 601, 800, 801. (Part No: TBAA4628A)$37.52

Bearing Cup - Bearing, Tapered Cup For Major (Part No: 14283)$23.60

Bearing Cup, Rear Axle - For 4000, 4100, 4110 4600, 4610. (Part No: C5NN4874B)$8.45

Bearing, Input Reverse Gear - This Input Reverse Gear Bearing measures 31.75 mm inside diameter x 41.27 mm outside diameter x 25.4 mm width. Two are used per tractor. Replaces original part number C5NN7N168A. (Part No: C5NN7N168A)$40.59

Bearing, Main Input Shaft - Measures 40mm inside diameter, 90mm outside diameter, 23mm wide. Replaces 20943310, 63082RS, 6308, 86511837, 81805130, 81808853, C5NN7A452A, N115069A, 391068X1 (Part No: C5NN7A452A)$14.70

Bearing, Main Input Shaft - Measures 40mm inside diameter, 90mm outside diameter, 23mm wide. Replaces 20943310, 63082RS, 6308, 86511837, 81805130, 81808853, C5NN7A452A, N115069A, 391068X1 (Part No: C5NN7A452A)$14.70

Bearing, Transmission - This transmission bearing is used in 4 and 5 Speed Transmissions. For tractor models 2000, 4000, 600, 800, 900. (Part No: M1208EL)$51.58

Bearing, Transmission, Output Shaft - This transmission output shaft bearing is for tractor models 2000 and 4000 1965 and prior, 600, 800, 900. All the above with 5 Speed Transmissions. (Part No: NDA77060A)$19.23

Center Housing Gasket - Used on the following, all built 1965 or later: 2000, 2110LCG, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 333, 335, 340, 3400, 340A, 340B, 3500, 3600, 3610, 3900, 4000, 4100, 4110, 4110LCG, 445, 450, 4600, 4610, 515, 530A, 531, 532, 535, 540, 540A, 545, 550, 555, 555A, 555B, 655, 655A. Replaces D4NN4N507A, C5NN4N507A, 86569738 (Part No: D4NN4N507A)$22.00

Center Housing Side Cover Gasket - The Center Housing Side Cover Gasket is used on NAA Jubilee tractors, 1953-1954. Replaces original part number NAA4131B (Part No: NAA4131B)$0.95

Center Housing to Axle Housing Gasket - *** Sold single, must order 5.``Used on 800, 4120, 801 with heavy duty front end and heavy duty industrial. (Part No: NDA4036A)$3.90

Center Housing to Transmission Case Gasket - This Center Housing to Transmission Case Gasket early 4 speed transmission up to tractor serial number 14256 (1954 to early 1955) If you have a 4 Speed transmission above serial number 14256 use part number 310590. (Part No: NCA44025A)$3.59

Center Housing To Transmission Case Gasket - This Center Housing To Transmission Case Gasket (early 1955 - 64) is used on: 4 Speed transmissions (tractor serial number 14256 and Up), 5 Speed transmissions, and 10 speed select-o-speeds transmissions. If you have a 4 Speed transmission below tractor serial number 14256, use part number NCA44025A. This gasket replaces original part number 310590 (Part No: 310590)$5.25

Countershaft - Hollow for tractor models with 6 speed and Trans PTO: 2000, 3000, 2600, 3600, 231, 233, 335, 2110, 3400, 3500, 4500. (Part No: C5NN7111B)$188.87

Countershaft - Fits 8N. The overall length of this countershaft is 11.887 inches. Replaces 8N7111. (Part No: 8N7111)$122.13

Countershaft - This countershaft is for tractor models 600, 700, 800, 2000, 4000 (1955-1964), and for 2000, 3000 4-Speed Transmission with PTO (1965-1970). Also replaces NDA7111C. (0622R) (Part No: C5NN7N109A)$179.32

Countershaft - For 9N, 2N, both with 3 speed transmission. Countershaft. (0621R) (Part No: 9N7111)$138.02

Countershaft - For NAA, Jubilee. Countershaft. (Part No: NAA7111C)$166.69

Counter Shaft - This Transmission Counter Shaft is used on Ford 5000, 5100, 5200, 7000, 7100, 7200, 5600, 6600, 7600, 6700, 7700, 5610, 6610, 7610. It has a 2.065 inside diameter. Replaces original part numbers C9NN7111B and C5NN7111G. (Part No: C9NN7111B)$163.35

Counter Shaft - Note that there is some discrepancy in OEM numbers on this part. This Counter Shaft has an inside diameter of 2.125 inches. Measure before ordering. If you have 2.065 inside diameter, then order part number C9NN7111B. It replaces C5NN7111G, C9NN7111B, D0NN7N047A, D2NN7111A, 81826590, 81878438, 81822960, 82930758, 82987564, 82983059, 83948780, 83960001, E6NN7111AA, E4NN7110AA (Part No: E6NN7111AA)$163.90

Countershaft Bearing Cone - This front transmission countershaft bearing cone is for 4 and 5 Speed Transmissions. For tractor models: 2000 and 4000 before 1964, and 600, 800, 900. (Part No: NDA77123A)$7.08

Countershaft Bearing Cup - This transmission countershaft bearing cup is for 4 and 5 speed transmissions. For tractor models: 2000 and 4000 prior to 1964 and for 600, 800, 900. (Part No: NDA77124A)$7.31

Countershaft Gear - Replacing Ford New Holland part numbers 81804753, C5NN7113B, 81869991, this Transmission Countershaft Gear has 16 and 35 teeth. It is used on Ford models 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 260C, 2610, 2610V, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110LCG, 4110N, 4110V, 4130, 4130N, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 4500, 455, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5100, 515, 5200, 530, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, 7000, 7100, 7200 (Part No: C5NN7113B)$231.07

Countershaft, Main, Transmission - 16 16 tooth, 26 26 spline, 10.125 inches long. For tractor models: Dexta, Super Dexta. (Part No: 957E7111D)$106.67

Countershaft, Transmission - 16 18 tooth, 26 spline, 10.00 inches long. For tractor models (2000, 3000, 4000 all with live PTO, 8 speed transmission, built from 9 1965 and up). (Part No: C5NN7111N)$369.03

Coupling, Counter Shaft Sliding Gear - 21 teeth, 16 spline. For tractor models 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 4500, 455, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5600, 5610, 5610S, 5640, 5700, 5900, 655, 655A, 6600, 6610, 6610S, 6640, 6700, 6710, 7010, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810S, 7840, 8010, 8240, TS100, TS90 all with 8 speed transmission. Replaces C5NN7106B, C7NN7106E, C5NN7102F, D2NN7106B, C5NN7106D, 81819184, 81826589, 81823632, 81813478, E0NN7106BA, 83934545 (Part No: E0NN7106BA)$56.98

Cover - Cover Assembly, transmission case. For tractor models 2000 3 Cyl Tractor, 2150, 2300, 2310, 3000, 3055, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550 Indust Const, 4110, 4140, 4190, 4330, 4340, 4400, 4410, 4500 Indust Const, 5000, 5190, 5340 (Part No: C5NN7211F)$32.37

Deep Groove Ball Bearing Single Row - This bearing measures 50mm inside diameter, 90mm outside diameter, 20mm wide. It is used as PTO Input Shaft Bearing with live PTO. It also has other applications. Confirm by OEM part numbers. Replaces: 6210, 26794660, C5NN7N166B, C0NN7C246B, N115069B, 81854759, 83908455, 84330059, 255090201, 8101-06210, 391162X1, 24101-62104, 971041, 979537, 971129 (Part No: C5NN7N166B)$18.30

Deep Groove Ball Bearing Single Row - This bearing measures 50mm inside diameter, 90mm outside diameter, 20mm wide. It is used as PTO Input Shaft Bearing with live PTO. It also has other applications. Confirm by OEM part numbers. Replaces: 6210, 26794660, C5NN7N166B, C0NN7C246B, N115069B, 81854759, 83908455, 84330059, 255090201, 8101-06210, 391162X1, 24101-62104, 971041, 979537, 971129 (Part No: C5NN7N166B)$18.30

Differential Bearing - For tractor models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5640, 5700, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, Dexta, Super Dexta, TS100, TS110, TS115, TS80, TS90. Replaces 957E4222, 957E4221, 81803413, 81803420 (Part No: 185251M1)$38.12

Differential Bearing and Cup - This Differential Bearing and Cup is used on Ford 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, Dexta, Jubilee, NAA and other. Replaces original part numbers B4222, BB4222, BB4221B, 510884, 510892, 81709463, 83402421. (Part No: 195159M1)$21.83

Differential Front Pinion Bearing Cup - This differential front pinion bearing cup is for tractor models 2120, 3500, 4120, 600, 601, 800, 801. (Part No: NCA4616A)$14.99

Differential Gasket Kit - Diff. gasket and o-ring kit. Contains: NAA502A, NAA4036A(2), C5NN747A, NAA4662B, 8N6734, 8N7011, 12-OR(3), 17-OR(3). For Jubilee, NAA. (Part No: DGKNAA)$13.08

Differential Gasket Kit - Differential gasket and o-ring kit: 13 pieces. For tractor models 600, 700, 900. (Part No: DGK679)$10.80

Differential Gasket Kit - This differential gasket and o-ring kit is for tractor models 800. (Part No: DGK800)$10.02

Differential Gasket Kit, 6 Pieces - Fits 8N, 9N, 2N. 6 Piece Set. Includes: (1) 9N502, (1) 9N611, (2) 2N4035, (1) C5NN747A, (1) 9N4662, (1) 181217M3 (Part No: DGK928)$10.10

Differential Lock Coupler - Used in Ford equipment with differential lock, 1965 and later, this part replaces Ford New Holland part numbers: C5NN4N064A, 81812261, 81871527. This part is used on the following models: 250C, 260C, 2810, 2910, 3000, 3055, 3230, 335, 340, 340A, 340B, 3430, 345C, 345D, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 420, 4200, 4330, 4340, 4400, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 515, 5190, 5200, 532, 5340, 535, 540, 545, 550, 5500, 555, 5550, 555A, 555B, 555C, 555D, 555E, 5600, 5610, 5610S, 575D, 575E, 5900, 650, 6500, 655, 655A, 655C, 655D, 655E, 6600, 6610, 6610S, 6700, 6710, 6810, 7000, 750, 7500, 755, 755A, 755B, 7600, 7610, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210, TS100, TS90 (Part No: C5NN4N064A)$97.50

Differential Lock Gear Case Adaptor - For tractor models 2000, 3000, 5000, 6600, 6610. Replaces original parts numbers 81800472 and E186EB9. (Part No: E186EB9)$91.78

Differential Lock Nut - For tractor models 2000, 231, 233, 2600, 3000, 333, 335, 3600, 4110, 531. (Part No: C5NN4N001A)$14.27

Differential Pinion Bearing Cone - For tractor models 2000 1965>, 2N 1939-1952, 3000 1965>, 4110 1965>, 600 with 4 speed transmission serial number <54165 - 1958, 5 speed transmission serial number <196155 - 1959, 601 with 4 speed transmission serial number 54166> -1958-1962, 5 speed transmission serial number 106116> - 1960-1964, 8N 1939-1952, 9N 1939-1952, Dexta 1957-1964, NAA 1953-1954. Replaces BB4221B, 510884. (Part No: BB4221B)$24.62

Differential Pinion Bearing Cup - Bearing Cup, Differential Bearing. For 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, Dexta, Jubilee, NAA Replaces BB4222, BB4222B, 510892. (Part No: BB4222)$12.93

Differential Pinion Front Cone - This front differential pinion cone fits 2120 with 4 speed transmission serial number 54166> (1958-1962), 5 speed serial number 106116> (1960-1964), 3500 (1965-1972), 4120 with 4 speed serial number 54166> (1959>), 5 speed serial number 106115> (1959>), 600 with 4 speed serial number <54165 (1958), 5 speed serial number <196155 (1959), 601 with 4 speed serial number 54166> (1958-1962), 5 speed serial number 106116> (1960-1964), 800 with 4 speed serial number <54166 (1958), 5 speed serial number <106115 (1960), 801 with 4 speed serial number 54166> (1959>), 5 speed serial number 106115> (1959>). (Part No: D1NN4N028A)$35.18

Differential Pinion Pilot Bearing - For tractor models 2120 with 4 speed transmission serial number 54166> -1958-1962, 5 speed serial number 106116> - 1960-1964, 600 with 4 speed transmission serial number <54165 - 1958, with 5 speed serial number <196155 -1959, 601 with 4 speed transmission serial number 54166> -1958-1962, 5 speed serial number 106116> - 1960-1964, NAA, Jubilee 1953-1954. (Part No: 81T4625MA2)$126.75

Differential Pinion Pilot Bearing - This differential pinion pilot bearing is for tractor models 2N (1939 to 1952), 4120 with 4 speed transmission serial number 54166> - 1959>, 5 speed transmission serial number 106115> - 1959>, 800 with 4 speed transmission serial number <54166 - 1958, 5 speed transmission serial number <106115 - 1960, 801 with 4 speed transmission serial number 54166> - 1959>, 5 speed transmission serial number 106115> - 1959>, 8N (1939 to 1952), 9N (1939 to 1952). (Part No: BB4625B)$80.83

Differential Pinion Seal - This differential pinion seal is for tractor models (2120 with 4 speed transmission serial number 54166 and up, 5 speed transmission serial number 106116 and up), (4120 with 4 speed transmission serial number 54166 and up, 5 speed transmission serial number 106115 and up), (600 with 4 speed transmission serial number 54165 and below, 5 speed serial number 196155 and below), (601 with 4 speed transmission serial number 54166 and up, 5 speed transmission serial number 106116 and up), (800 with 4 speed transmission serial number 54166 and below, 5 speed transmission serial number 106115 and below), (801 with 4 speed transmission serial number 54166 and up 5 speed transmission serial number 106115 and up). (Part No: 312356)$9.38

Drive Plate Bearing - Measuring 2.68 inches outside diameter, 1.43 inches inside diameter, 0.59 wide. It is listed here as a Transmission Drive Plate bearing but has other applications. Replaces OEM numbers 47508382, 81811675, 81816675, C5NNN779A, C5NN779B, 83992560, F0NN779AA, C5NNN779B, F0NNN779AA. Used on Ford 4400, 4500, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5550, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8000, 8010, 8030, 8100, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, TS100, TS110, TS80, TS90, TW10, TW15, TW20, TW25, TW30, TW35, TW5 (Part No: C5NNN779B)$15.90

Drive Shaft, Transmission - 17 tooth, 15 spline, 16.50 inches long. For tractor models Dexta, Super Dexta. (Part No: 957E7017C)$122.37

Forward / Reverse Shift Cable - Used on Ford New Holland models 8160, 8260, 8360, TM115, TM120, TM125, TM130, TM140. For Mechanical Gear Box with 20 x 16 or 16 x 16 Transmission, 54 Inches over all length. (Part No: 82006918)$56.58

Gasket, Axle housing to center - Gasket center housing to rear axle housing. Tractors: NAA, 600, 2120, LCG (1953 and up). (Part No: NAA4036A)$3.99

Gasket, Drain Plug - Hydraulic and Transmission Drain plug Gasket. 2 inch inside diameter. Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Part No: 8N7011)$1.38

Gasket, Main Drive Gear Bearing Retainer, Pack of 5 - For tractor models 8N, 9N, 2N, NAA, Jubilee, NAB. (Part No: 9N7086)$3.75

Gear, 1st - 49 28 teeth, 1.775 inch inside diameter, 7.125 inch outside diameter. For tractor models 2000, 2110, 2120, 2300, 2310, 2600, 3000, 3055, 3330, 3400, 3500, 3600, 4000, 4110, 4140, 4330, 4340, 4400, 4410, 4500. (Part No: C5NN7100A)$203.32

Gear, 1st - 46 28 tooth. For tractor models 2100, 2600, 2610, 2810, 2910, 3055, 3100, 3400, 3550, 3600, 3610, 3900, 3910, 4100, 4110, 4140, 4410, 4500, 4600, 4610, 5100, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N100A, E6NN7N100AA, C5NN7N100C, 81813521, 83960019 (Part No: 83960019)$93.46

Gear, 1st & 3rd - 49 28 tooth, 1.775 inches inside diameter, 7.250 inches outside diameter. For tractor models Dexta, Super Dexta. (Part No: 957E7100C)$85.08

Gear, 1st, 4 Speed Transmission - This transmission gear is the 1st gear, in the 4 speed transmission. It is 60 28 tooth, and is for tractor models 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7100)$243.53

Gear 1st and 5th - Gear has 49 and 28 teeth. Verify tooth count. C5NN7N100A was used to describe two different parts. If you a gear with 46 and 28 teeth, use E6NN7N100AA. Replaces (Part No: C5NN7N100A)$106.94

Gear, 1st and 5th - Used on 8 speed transmissions on Ford models 5000, 5100, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6600, 6610, 6610S, 6640, 6710, 6810, 7000, 7010, 7100, 7200, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7840, 8010, 8240, TS100, TS90. This gear has 46 and 28 teeth. It replaces OEM numbers 83946988, 82987560, E6NN7N100BA, E2NN7N100AA, 83959993, D2NN7N100A, 81826587 (Part No: E6NN7N100BA)$128.85

Gear, 2nd - For 8 speed transmissions. 43 28 teeth, 1 13 16 inch inside diameter. Models: 2000, 3000, 3600, 3610. (Part No: C5NN7102F)$223.30

Gear, 2nd & 5th - 41 28 Tooth, 1.775 inch inside diameter, 6.125 inch outside diameter. For tractor models 2000, 2110LCG, 231, 233, 2600, 3000, 335, 3400, 3500, 3600, 4110LCG, 4400, 4500, 531, Dexta, Super Dexta. All with 6 speed transmissions. Replaces 957E7101B (Part No: 957E7101B)$98.79

Gear, 2nd and 6th - Gear has 28 and 43 teeth. It is used is some 8 speed transmissions of Ford Tractors. Replaces OEM numbers C5NN7N101B, D2NN7N101A, 81813520, E2NN7N101AA, 81826588, C5NN7N101D, E6NN7N101BA, 82987561, 83959996, 83945994 (Part No: E6NN7N101B)$110.12

Gear, 2nd and 6th - Gear has 28 and 43 teeth. It is used is some 8 speed transmissions of Ford Tractors. Replaces OEM numbers C5NN7N101B, D2NN7N101A, 81813520, E2NN7N101AA, 81826588, C5NN7N101D, E6NN7N101BA, 82987561, 83959996, 83945994 (Part No: E6NN7N101B)$110.12

Gear, 2nd Transmission Countershaft - Transmission countershaft second gear. For NAA, Jubilee. All 4-speed Ford transmissions (1953-1964), 8N (1948-1952). 17 teeth. (Part No: B9NN7114A)$70.68

Gear, 3rd, 4 Speed Transmission - This transmission gear is the 3rd gear in the 4 speed transmission. It is a 52 tooth gear. For tractor models 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB. All with 4 speed transmissions. (Part No: 8N7102)$211.66

Gear, 3rd, 8 Speed Transmission - 28 35 teeth. For tractor models 2000, 3000, 3600, 3610 all with 8 speed transmission. (Part No: C5NN7B340A)$107.36

Gear, 3rd and 7th - This gear is used on 250C, 260C, 340B, 345D, 445A, 445D, 5000, 530B, 545A, 545D, 5600, 5610, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7610, 7710. It has 28 and 35 teeth and a 1.555 inch inside diameter. Replaces C9NN7N315B, CNN7N315B, E6NN7N315AA, E6NN7N315BA, 81822962. (Part No: C9NN7N315B)$100.05

Gear, 3rd and 7th - This gear has 35 teeth. It is used on 8 Speed, Non Synchro transmissions. Replaces OEM numbers 7706988, 07706988, 83900392, 81805076, 83960029, 83960392, 83990392, C5NN7N339D, E9NN7N315AA (Part No: E9NN7N315AA)$115.20

Gear, 3rd and 7th - Gear has 35 Teeth. It is used on 8 Speed Non Synchro transmission. Replaces OEM part numbers 83960029, 81822962, 83959997, 82987562, C9NN7N315B, E6NN7N315AA, E6NN7N315BA (Part No: E6NN7N315BA)$105.06

Gear Assembly - Gear-shaft assy. For 8N. (Part No: 8N6608A)$30.90

Gear, Countershaft, 6 Speed Transmission - 24 middle teeth, 57 outside diameter teeth, 26 spline. For tractor models (2000, 3000, 4000 all with 6 speed transmission.) (Part No: C5NN7113G)$197.31

Gear, Countershaft, 8 Speed Transmission - 30 inside diameter teeth, 56 outside diameter teeth, 26 inside diameter internal spline. For tractor models (2000, 3000, 3600, 3610 all with 8 speed transmission.) (Part No: C5NN7113D)$172.50

Gear, Countershaft, 8 Speed Transmission - 30 middle teeth, 46 outside diameter teeth, 26 spline. For tractor models (2810, 2910, 3550, 3910, 4000, 4610 all with 8 speed transmission) (Part No: C5NN7113J)$367.27

Gear, Differential Side - Part 1 in the picture. For tractor models (2000, 3000, 4000 all 1965-1975 LH with diff. lock, LH or RH without locks), (5000, 7000 all 1965-1975 RH with Diff. lock, LH RH without diff locks), (2600, 3600, 4100, 4600 all 1975-1981 LH with diff. lock, LH RH without locks), (5600, 5700, 6600, 6700, 7600, 7700 all 1975-1981 RH with Diff. lock, LH RH without locks), (2610, 3610, 4110 all 1981 and up LH with diff lock, LH RH without locks), (5610, 6610, 6710, 7610, 7710 all 1981 and up RH with diff lock, LH RH without locks). (Part No: C5NN4236A)$75.62

Gear, Differential Side - Part 2 in picture. For tractor models (2000, 3000, 4000 all 1965-1975 RH with diff. lock), (2600, 3600, 4100, 4600 all 1975-1981 RH with diff. lock), (2610, 3610, 4110, 4610 all 1981 and up RH with diff. lock). (Part No: C5NN4239A)$101.43

Gear Lever - The Gear Lever is used on Ford 5000, 5100, 5190, 5200 Tractors It replaces original part numbers C5NN7210G, 81804872 (Part No: C5NN7210G)$60.64

Gear, Mainshaft 2nd - This transmission mainshaft 2nd Gear has 56 teeth. For NAA, Jubilee, all 4-Speed Ford Transmissions (1955-1964), 8N, 4-Speed Transmission, 1948-1952. (Part No: B9NN7A381B)$113.38

Gear, MFWD Planetary - 34 Tooth, ZF AXLE For tractor models TW5, TW15, TW25, 7910, 8210, 8530, 8630, ALL APL355, 6710, APL345, 350, 7010 with 4WD-APL345, 7610, 7710, ALL APL345 350. Replaces T82568, L41120 (Part No: ZP4472353463)$215.07

Gear, Reverse - 28 32 tooth, 1.800 inch inside diameter, 4.800 inch outside diameter. Replaces C5NN7N012B. For tractor models: 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N012B, 83963585, E2NN7N012AA, E6NN7N012AA, 81872311, 83960462, 81813476 (Part No: E6NN7N012AA)$107.50

Gear, Reverse - 28 32 tooth, 1.800 inch inside diameter, 4.800 inch outside diameter. For tractor models: 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N012B, E6NN7N012AA. (Part No: 83960462)$195.48

Gear, Reverse - For tractor models 2000, 3000, 4000. All with 8 Speed Transmission 9 1965>. Reverse Gear. 30 and 28 teeth. Replaces C5NN7K013A. (Part No: C5NN7K013E)$80.32

Gear, Reverse - With 30 Teeth. It replaces part numbers C5NN7K013A, 81813563 (Part No: C5NN7K013A)$86.80

Gear, Reverse Idler, 8 Speed Transmission - 33 teeth. For tractor models (2000, 3000, 3600, 3610 all with 8 speed transmission.) (Part No: C5NN7141A)$109.30

Gear, Reverse Idler, 8 Speed Transmission - 31 teeth. For tractor models (2000, 3000, 3600, 36100 all with 8 speed transmission). Replaces C5NN7141B. (Part No: 81813479)$246.88

Gears, 2nd Mainshaft and Countershaft, 4 Speed Transmission - This 2nd mainshaft gear and countersaft are for the the following tractors: 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 Cylinder Engines and 4 Speed Transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Part No: B9NN7A381B-set)$170.18

Gear, Secondary Output Shaft - 45 big teeth, 28 small teeth. For tractor models 2000, 2100, 2110, 2110LCG, 2120, 2150, 2300, 231, 2310, 233, 2600, 3000, 3055, 3100, 3330, 335, 3400, 3500, 3600, 4000, 4100, 4110LCG, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 531, Dexta, Super Dexta. Replaces E49GA9 (Part No: E49GA9)$105.29

Gear Shaft, Reverse Idler - This reverse idler gear shaft is for tractor models 2000, 2120, 2130, 2131, 4000, 4120, 4121, 4130, 4131, 4140, 600, 601, 650, 651, 660, 661, 800, 801, 820, 821, 850, 851, 860, 861, 900, 901, 950, 951, 960, 961. (Part No: NDA7140A)$48.04

Gear shift assembly - For tractor models 5000, 5100, 5200, 7000, 7100, 7200. The plate on this shifter is 11 inches wide and 13.25 long. (Part No: C5NN7222)$136.62

Gear Shift Assembly - This Gear Shift is used on Fordson Dexta and Super Dexta. It Replaces: 957E7210C Lever, 957E7220 Cover Plate, 957E7222 Cover Plate, E168GB9 Retainer, E439GB9 Lever. Uses E440GB9 and C5NN7213A knobs. Knobs included (Part No: 957E7210C)$157.32

Gear Shift Boot - Transmission Gear Shift Lever Boot. For tractors: 8N, 9N, 2N, NAA. Bottom hole is 1-1 2 inches in diameter. (Part No: 8N7277)$5.95

Gear Shift Boot - This Gear Shift Boot can be used on multiple Ford New Holland Tractors built 1965 and later. The top holes is 5 8 inch and the bottom hole is 2 1 2 inches. It replaces original part numbers C5NN27534, C5NN275394, C5NN7277D, D4NN7N309A, 82007346. (Part No: C5NN27534)$2.70

Gear Shift Boot - This Gear Shift Boot can be used on multiple Ford New Holland Tractors built 1965 and later. The top holes is 5 8 inch and the bottom hole is 2 1 2 inches. It replaces original part numbers C5NN27534, C5NN275394, C5NN7277D, D4NN7N309A, 82007346. (Part No: C5NN27534)$2.70

Gear Shift Boot - This Gear Shift Boot is used on Ford New Holland the following models with Dual Command Or Synchro Command Transmissions: 5640, 6640, 7740, 7840, 8240, 8340, TS100, TS110, TS115, TS90. Replaces 82009265 (Part No: 82009265)$75.17

Gear Shift Boot - This gear shift boot has a bottom hole that is 7 8 inch diameter. For 9N, 2N, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (ALL 1939 TO 1964 WITH 4 SPEED). Gearshift Boot - Restoration Quality. Can be used to replace 9N7277. (Part No: C5NN7277C)$2.60

Gear Shift Connector & Coupling - 17 spline, 3.850 inch outside diameter. For tractor models 2000, 3000, 3600, 3610. All with 8 speed transmission. (Part No: E344GA9)$114.32

Gear Shift Coupler, Front - 28 teeth, 17 splines. For tractor models 2310, 2610, 2810, 2910, 335, 340, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4410, 445, 4500, 4600, 4610, 5000, 5100, 5110, 535, 545, 550, 555, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740. (Part No: E6NN7N072AA)$51.75

Gear Shift Coupler, Rear - 28 teeth, 20 spline. For tractor models 2600, 2610, 2810, 2910, 3100, 340, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4410, 445, 4600, 4610, 5100, 5110, 5200, 5610, 5640, 5900, 6410, 6600, 6610, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710, 7740. Replaces D6NN7N072B, E6NN7N072BA. (Part No: 82983825)$102.31

Gear Shift Cover Gasket - This Gear Shift Gasket is used with C5NN7222 Gear Shift Assembly. Replaces 83958298, D2NN7223A, E0NN7223BA, 81829229, E5NN7223AA (Part No: E5NN7223AA)$2.34

Gear Shift Housing with Boot - This Gear Shift Housing includes 82009265 Boot. It is used on tractors built 3 01 1993 and later, with Dual Command and Synchro Command Transmissions. Fits some 5640, 6640, 7740, 7840, 8240, 8340 tractors. Replaces 82009262, 82009265 (Part No: 82009262)$164.18

Gear Shift Knob - This Gear Shift Knob fits 5 16 inch x 24 thread and approx. 1.299 inch diameter. It replaces original part numbers E440GB9, 81800669 (Part No: E440GB9)$3.36

Gear Shift Knob - This Gear Shift Knob fits 5 16 inch x 24 thread and approx. 1.299 inch diameter. It replaces original part numbers E440GB9, 81800669 (Part No: E440GB9)$3.36

Gear Shift Lever Spring - This gear shift lever spring fits tractors with a 3 or 4 speed transmission, or 4 speed Torque Converter Transmission, It is 2.210 inches tall, 1.768 inch tapers to 1.003 inch outside diameter, 0.140 inch wide diameter. It is for tractor models 8N, 9N, 2N. (Part No: 9N7227B)$5.95

Gear Shift Lever Spring - Fits the tractors with 3 or 4 speed transmission or 4 speed Torque Converter Transmission, 2.210 inches tall, 1.768 inch tapers to 1.003 inch outside diameter, 0.140 inch wire diameter. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 4000, 4030, 4031, 4040, 4110, 4121, 4130, 4131, (4140 4-cylinder), 4140. (Part No: 9N7227B)$5.95

Gear Shift Lever, with Knob, 4-Speed Transmission - This gear shift lever with knob replaces NAA7209A and 8N7209C shift levers. This newer version has 5 16 inch UNF thread for the shift knob (knob included). The early series 3 8 inch knob thread shaft is no longer available. Note: use gear shift knob C5NN7213A (included) if you need a replacement. This gear shift lever fits tractor with single lever 4 speed or torque converter transmission: 2000, 2110LCG, 3000, 340, 3400, 340A, 3500, 3550, 4000, 420, 445, 4500, 532, 535, 540, 540A, 545, 5500, 600, 601, 700, 701, 800, 801, 8N, 900, 901, Jubilee, NAA (Part No: C5NN7202B)$77.24

Gear Shift Pin - This gear shift pin fits tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (>1965 ) with 3 and 4 speed transmission). (Part No: 9N7221B)$4.13

Gear Shift, Rail - High Low. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 3400, 340A, 340B, 3430, 345D, 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5030. (Part No: C5NN7240AD)$39.90

Gear, Transmission Countershaft - 50 teeth, 11 splines. For tractor models 2810, 2910, 3230, 3430, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4830. (Part No: D1NN791A)$164.22

Hi-Lo Shifter - This Hi-Lo Shifter is used on Ford 8000 and 9000 series tractors, 1 1968-9 1972 (Part No: C7NN7N329A)$177.40

Hi-Low Shift Arm - This Shift Arm is used 8000, 9000, 8600, 9600 (10 1972-7 1976). It replaces original part number D3NN7N329A. (Part No: D3NN7N329A)$139.15

Hub - Rear Axle Hub 8N, NAA, Jubilee. With Studs. (Part No: 8N1171)$57.10

Hub Carrier, Shaft - Used with the following tractors that use APL135 FWD Axle: 585, 644, 685, 743, 744, 745, 745S, 785, 844, 844S, 856, 885. Replaces 1502272C1. (Part No: 3232082R91)$207.61

Hydraulic Pump Drive Gear - Hydraulic Pump Drive Gear is 1.125 inch overall thickness at the bushing. It is used with Housing C9NN7049C and E0NN7049AA. It will not work on C5NN7049A housing. Replaces: C7NN873A, C7NNN883A, D3NN873A, D9NNN883AA, D3NNN883A, D9NN883AA, D9NNN883AA, 83919059. (Part No: D3NNN883A)$80.76

Input Drive Shaft - This Input Drive Shaft has 10 Splines, 20 Helical Teeth. It is used on 3 and 4 speed transmissions on Ford: 8N, 9N, 2N, NAA, 500, 600, 700, 800, 900. It replaces original part number 2N7017A. (Part No: 2N7017A)$259.70

Input Drive Shaft - This Input Drive Shaft is used on 4 speed transmissions. It has 15 Splines, 20 Teeth and it 22.62 Long. Used on 2000, 3000, 3400, 3500. Replaces original part number C5NN7017B (Part No: C5NN7017B)$395.21

Input Drive Shaft - This Input Drive Shaft is 17.66 inches long, has 10 splines and 19 teeth. Replaces original part numbers C5NN7017AC, C7NN7017AB, 81813988, 81820864 (Part No: C7NN7017AB)$97.29

Input Drive Shaft - This Transmission Shaft is for use in applications without dual power. It has 10 and 20 tooth ends, 19 1 4 inch (.22 inches) length with flange seal 1 3 4 inches from end. Replaces original part numbers E0NN7017HA and 83926238. (Part No: E0NN7017HA)$68.93

Input Drive Shaft - This Input Drive Shaft, is hollow. It has a Length of 19.22 inches, 10 Spline, 20 Teeth. Spline Flange is 1.46 from end. Replaces original part numbers E2NN7017EA, 83946987. (Part No: E2NN7017EA)$215.10

Input Shaft - This is an input shaft used on Sherman Step-Up Step-Down (Hi Low) gear boxes. It is 8 inches long. Used on Ford Tractors 1955-1964. It replaces original part number C3NN7015D (Part No: C3NN7015D)$220.32

Input Shaft - This Input Shaft is used on Step Up Step Down Transmissions. It is 9 inches in length. Used in the following tractors, 1965 and later: 2000, 3000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 3400, 3500. Replaces C5NN7015T. (Part No: C5NN7015T)$220.31

Input Shaft - This Input Shaft is 15.89 inches long. It is used on 8000 and 9000 series tractors 1 1968-8 1969. It replaces original part number C7NN7017A. (Part No: C7NN7017A)$281.01

Input Shaft - This Input Shaft is 15.28 inches long. 8000, 9000, 8600, 9600, 8700, 9700, TW10, TW20, TW30, TW5, TW15, TW25, TW35 (9 1969-1990). (Part No: D8NN7017AA)$289.58

Input Shaft - This input shaft is for the 4 Speed transmission. It has 15 Spline, and is 17 inches in overall length. It is for tractor models 1801, 1821, 1841, 2000 series, 2030, 2111, 2120, 2130, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 700, 701, 800, 801. (Part No: 311203)$184.56

Input Shaft Seal - The measurements on the seal are 2.283 inch inside diameter, 3.130 inch outside diameter, 0.375 inch wide. This seal replaces OEM numbers: D9NN7048BA, D6NN7048B, D2NN7048A, 81826482, C5NN77047A, D9NN7048AA, 83924926, 83912260, 83924160. Used on Ford 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7600, 7610, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 8010, 8240, TS100, TS90 (Part No: D9NN7048BA)$6.32

Input Shaft, Transmission - For tractor models 5000, 5100, 5600, 6600, 6700, 7100, 7200, 7600, 7700. All without dual power. 19.125 inches long. 20 and 25 Splines. Replaces original part numbers C5NN7017A 81804582. (Part No: C5NN7017A)$82.66

Input Shaft Tube - This Tube is used in 4 Speed Transmissions, Ford 4 Cylinder Tractors 1958-1964. Replaces original part numbers 311202, 311212. (Part No: 311202)$227.92

Input Shaft Tube - The Input Shaft Tube is used on 4 Speed transmissions on 3 cylinder; 2000, 3000, 3400, 3500. Replaces C5NN7A284B (Part No: C5NN7A284B)$256.36

Input Shaft Tube - This Input Shaft Tube is used on 5000, 5100, 5200, 7000, 7100, 7200, 5600, 6600, 7600 Ford Tractors. Replaces original part numbers C5NN7N541B, 81805278 (Part No: C5NN7N541B)$141.88

Input Shaft Tube - This Input Shaft Tube is used on 5610, 6610, 7610, 5640, 6640, 7740. It has a 2.045 inch outside diameter. Replaces original part number E0NN7N541BB. (Part No: E0NN7N541BB)$190.11

Main Shaft - 30 18 teeth. For tractor models (5000 with dual power 6 1973 and up), (5600, 6600, 6700, 5610, 6610, 6710, 6810 with dual power), 7810, 8010, 5610S, 6610S, 7610S, 7810S, (5640, 6640, 7740, 7840, 8240, TS90, TS100, TS110 with 8 speed less dual power, 16 speed with dual power). Replaces E7NN7C094AA. (Part No: 82983066)$199.41

Main Shaft - This Transmission Main Shaft is used in 8 speed transmissions on 5000, 5100, 5300, 7000, 7100, 7200 tractors. 30 and 16 Teeth. Replaces C5NN7C094A (Part No: C5NN7C094A)$251.16

Main Shaft - This Transmission Main Shaft has 30 teeth, 18 16 splines. It is 9.937 inches long. When replacing C9NN7C094B in units manufactured before 11 02 1971 it will also be necessary to replace C9NN7N315B. Replaces C9NN7C094B, C5NN7C094C. (Part No: C9NN7C094B)$241.50

Main Shaft Connecting Coupling - For tractor models 2000, 3000, 8N, NAA, Jubilee and others all with 4 speed transmission. Main shaft connecting coupling has 21 teeth, 16 spline. Replaces 83959995, 957E7106 (Part No: E6NN7106AA)$61.96

Mainshaft Front Bearing - Measuring 30mm inside diameter, 72mm outside diameter, and 20.75mm wide, this bearing replaces OEM numbers D0NNN755B, 46805, 26800340. It is used on Ford models 2000, 2100, 2110, 2600, 2600N, 2600V, 2810, 2910, 3000, 3100, 3330, 335, 3400, 3500, 3550, 3600, 3600N, 3600V, 3900, 3910, 3910N, 3910V, 4000, 4100, 4110, 4110N, 4110V, 4140, 420, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 5000, 5100, 515, 5200, 532, 5340, 535, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700 (Part No: D0NNN755B)$18.36

Main Shaft Pilot Needle Bearing - This Main Shaft Pilot Needle Bearing is used on 2000, 2110LCG, 230A, 231, 2310, 233, 234, 2600, 2610, 3000, 333, 334, 335, 3400, 3600, 3610, 530A, 531, Super Dexta. Measures 0.9973 inches inside diameter x 1.3735 inches outside diameter x 0.875 inches wide. Replaces 960E7120, C5NN7120B, 81821350, C9NN7120A (Part No: C5NN7120B)$34.75

Main Shaft Rear Bearing - The measurements on this bearing are 55mm inside diameter, 100mm outside diameter, 21mm wide. It replaces OEM numbers C7NN7118B, DDN7025A, E1ADDN7025A. Used on Ford 5000, 5600, 6600, 6700. (Part No: C7NN7118B)$27.68

Mainshaft, Transmission - 28 28 tooth, 17 spline, 11.875 inches long. For model Dexta. (Part No: 957E7061E)$203.84

Mainshaft, Transmission - This transmission main shaft has 17 teeth, 15 splines and is 17.675 inches long. Replaces C5NN7017H, 81804588. (Part No: C5NN7017H)$109.71

Mainshaft, Transmission, Rear - 30 teeth, 17 and 28 splines. For tractor models (2000, 3000, 3600, 3610 all with 8 speed transmission.) Replaces C5NN7C095D, 81804717 (Part No: C5NN7C095D)$151.62

Main Shift Lever - For 1, 2 and 3rd Speed Gears. Also replaces 957E7210C. 11.89 inches long. (Part No: 81717916)$54.57

Mian Shaft - This Transmission Main Shaft is used with Dual Power and PTOs. It has 30 and 18 Teeth. Replace original part numbers E2NN7C094DA, E7NN7C094AA (Part No: E2NN7C094DA)$199.41

Oil Filler Plug - For transmission and rear end. For tractor models 2000 3 cylinder, 231, 233, 234, 2600V, 333, 335, 340, 420, 445, 515, 531, 532, 535, 540, 545, 550, 555, 2100, 2110, 2120, 2150, 2300, 2600, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3900, 4000 3 cylinder, 4100, 4110, 4140, 4190, 4200, 4300, 4340, 4400, 4410, 4500, 4600, Dexta, Power Major, Super Dexta, Super Major. Please verify the thread size before ordering. This plug measures 1-5 8 inch x 12 thread. Does not come with gasket. Use NAA9160A for gasket. (Part No: 957E7010)$7.56

Oil Pressure Switch - This Transmission Pressure Switch Thread has M12 x 1.5mm fitting. It is used in multiple Ford New Holland, Case IH and Fiat models. Replaces part numbers 5115055, 79043250, 82030730, 82031395, 87395493 (Part No: 82031395)$29.12

Oil Seal, Main Drive Gear - This main drive oil seal is for 3 and 4 speed transmissions on tractor models: 8N, 9N, 2N, 600, 700, 800, 900, NAA, NAB, Jubilee. Measures 2 inches outside diameter, 1.34 inches inside diameter and .332 inches wide. `` Replaces part number: 8N7052A, 8N7052A2, C0NN7C248A. (Part No: 8N7052A)$4.91

Oil Seal, Rear Axle, Inner - This is an inner oil seal for the rear axle. For tractor models Dexta, Super Dexta. Measures 2 inches x 2 7 8 inches x 0.468 inch. Replaces 957E4233B. (Part No: 195555M1)$5.97

Oil Seal, Rear Axle, Outer - This is an outer oil seal for the rear axle. For tractor models Dexta, Super Dexta. (Part No: 957E4250A)$6.75

Oil Seal, Secondary Output Shaft - For tractor models 2000, 2600, 3000, 3600, 4000 all with 6 Speed Transmission, Dexta, Super Dexta. Measures 83mm outside diameter x 46mm inside diameter x 14.8mm width. Replaces E42GA9, 81717023 (Part No: E42GA9)$6.84

Output Shaft and Coupling Assembly - Used on 8 speed transmissions on the following (7000 With or without Dual Power), (5600, 6600, 6700 all 5 1984 and later without Dual Power), (5900 1981 - 7 1987 with Dual Power), (5610, 6610, 6710 6810, 7610, 7710 1981-7 1987 with Dual Power), 5640, 6640, 7740, 7840, 8240. Note that the non-splined end is 0.75 inches in diameter. Replaces Ford part numbers 81833752, 81822960, 81826590, 81878438, 82983059, D0NN7N071A, D2NN7N071A, D2NN7N071B, 83959995, E6NN7N71BA, E6NN7N071BA (Part No: E6NN7N071BA)$130.91

Output Shaft Bearing - Measures 41.3mm inside diameter, 73.4mm outside diameter and 19.8mm wide. Replaces: LM501349 501310, 663558R1, 81277C1, 81278C1, GHB142, 663557R91, 86512015, 5132342, 4999261, WAA4221A, 860270, 860297, WAA4222A, WAA4220A, 05132342, 67370, 67371, 644321, 81803417, 860299, 860301, 860302, 860304, 81803412, 860295, 86512015, 5132342, 83992412, 81854761, 81854361, JD8237, JD8902, 663556R91, 663558R1, 86512015, 663557R91, 109706396, GHB142, MBU1044, 113571M1 (Part No: 86512015)$10.05

Output Shaft Bearing - Measures 41.3mm inside diameter, 73.4mm outside diameter and 19.8mm wide. Replaces: LM501349 501310, 663558R1, 81277C1, 81278C1, GHB142, 663557R91, 86512015, 5132342, 4999261, WAA4221A, 860270, 860297, WAA4222A, WAA4220A, 05132342, 67370, 67371, 644321, 81803417, 860299, 860301, 860302, 860304, 81803412, 860295, 86512015, 5132342, 83992412, 81854761, 81854361, JD8237, JD8902, 663556R91, 663558R1, 86512015, 663557R91, 109706396, GHB142, MBU1044, 113571M1 (Part No: 86512015)$10.05

Output Shaft Bearing - Measures 41.3mm inside diameter, 73.4mm outside diameter and 19.8mm wide. Replaces: LM501349 501310, 663558R1, 81277C1, 81278C1, GHB142, 663557R91, 86512015, 5132342, 4999261, WAA4221A, 860270, 860297, WAA4222A, WAA4220A, 05132342, 67370, 67371, 644321, 81803417, 860299, 860301, 860302, 860304, 81803412, 860295, 86512015, 5132342, 83992412, 81854761, 81854361, JD8237, JD8902, 663556R91, 663558R1, 86512015, 663557R91, 109706396, GHB142, MBU1044, 113571M1 (Part No: 86512015)$10.05

Output Shaft Bearing - Measures 41.3mm inside diameter, 73.4mm outside diameter and 19.8mm wide. Replaces: LM501349 501310, 663558R1, 81277C1, 81278C1, GHB142, 663557R91, 86512015, 5132342, 4999261, WAA4221A, 860270, 860297, WAA4222A, WAA4220A, 05132342, 67370, 67371, 644321, 81803417, 860299, 860301, 860302, 860304, 81803412, 860295, 86512015, 5132342, 83992412, 81854761, 81854361, JD8237, JD8902, 663556R91, 663558R1, 86512015, 663557R91, 109706396, GHB142, MBU1044, 113571M1 (Part No: 86512015)$10.05

Output Shaft Bearing Set - Contains C5NN7N041A Cup and C5NN7N042A Cone. These were used on 8 Speed Transmission, 1 1965 - 4 1971. Replaces C5NN7N041A, C5NN7N042A, 86611047, 81804630. (Part No: C5NN7N041A)$61.91

Output Shaft Gear - Gear has 28 and 49 Teeth. It is used an many Ford New Holland Models with 8 speed and 6x4 Manual Reversing Transmissions. Replaces OEM part numbers C5NN7145A, 83960022, E6NN7145BA, 81804812, E6NN7145AA (Part No: E6NN7145AA)$138.39

Output Shaft Gear - Gear has 28 and 49 Teeth. It is used an many Ford New Holland Models with 8 speed and 6x4 Manual Reversing Transmissions. Replaces OEM part numbers C5NN7145A, 83960022, E6NN7145BA, 81804812, E6NN7145AA (Part No: E6NN7145AA)$138.39

Output Shaft Gear - Gear has 28 and 49 Teeth. It is used an many Ford New Holland Models with 8 speed and 6x4 Manual Reversing Transmissions. Replaces OEM part numbers C5NN7145A, 83960022, E6NN7145BA, 81804812, E6NN7145AA (Part No: E6NN7145AA)$138.39

PTO Countershaft - This PTO Countershaft is used in 5 Speed Transmissions 1955-1964. (Part No: NDA701B)$228.14

PTO Input Bearing Retainer Seal - The Seal Measures Oil seal, 1.878 inches inside diameter, 3.130 inches outside diameter, 0.5000 inches wide. It replaces OEM numbers E59GE9, 83924923, D9NNC729BA, 87712923 (Part No: D9NNC729BA)$5.21

PTO Input Bearing Retainer Seal - The Seal Measures Oil seal, 1.878 inches inside diameter, 3.130 inches outside diameter, 0.5000 inches wide. It replaces OEM numbers E59GE9, 83924923, D9NNC729BA, 87712923 (Part No: D9NNC729BA)$5.21

PTO Input Housing Gasket - Used on many Ford New Holland tractors, 1965 and later. It replaces OEM part numbers 81804647, 81804648, 83959976, C5NN7N051A, C5NN7N051B, E7NN7N051AA (Part No: C5NN7N051B)$0.83

PTO Input Housing Gasket - Used on many Ford New Holland tractors, 1965 and later. It replaces OEM part numbers 81804648, C5NN7N051B, E7NN7N051AA (Part No: C5NN7N051B)$0.83

PTO Input Shaft - This PTO Input Shaft is used on 5 speed transmissions with Live PTO. Used 1958 and later. 7 13 16 inches long. Replaces original part number 311249. (Part No: 311249)$151.21

Rear Axle - This is a Collar Type Rear Axle used on the following 1965 or later: 2000, 2100, 2110, 2110LCG, 2120, 2150, 2300, 231, 2310, 233, 234, 2600, 2610, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 3400, 3500, 3610, 4000, 4110, 4110LCG, 531. Additional $10 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces D7NN4244A, C5NN4244A, 83912192 (Part No: C5NN4244A)$226.38

Rear Axle Bearing and Cup - For Dexta, Super Dexta, 2000, 3000. Replaces E18EB9, E19EB9. (Part No: S.65478)$33.38

Rear axle housing gasket - This "Trumpet Gasket" is the center housing to rear axle housing. Tractors: 8N, 9N, 2N. (Part No: 2N4035)$1.91

Rear Axle Housing Gasket, Outer, Pack of 10 - Pack of 10. Fits Ford 8N, 9N, 2N, NAA and Jubilee. Replaces 9N4130, 8N4229E and 8N4229. Used for seal between bearing retainer and axle housing or backing plate. More than one may be required when used as 8N4229 shim. Thickness 0.016 inches. (Part No: 9N4130)$6.90

Rear Axle Inner Seal - This inner rear axle seal is for tractor models 2000, 2600, 2610, 3000, 3400, 3600, 3610. (Part No: C9NN4N109A)$4.59

Rear Axle Outer Seal - For tractor models 2000, 2600, 2610, 3000, 3400, 3600, 3610. Replaces C5NN4115B, 86531999, 81803352 (Part No: C5NN4115B)$6.41

Rear Axle Outer Seal - Oil Seal, outer, rear axle shaft. Inside diameter 2 3 8 inches. For tractors 9N, 2N, (1939-1947). 2.437 inch inside diameter, 3.485 inch outside diameter. For 9N, 2N. (Part No: D6NN4251A)$4.31

Rear Axle Sure-Seals - Fits 9N, 2N. 1 pair. No need to split collar and replace old outer axle seal. Sure-Seal fits over top of sweat collar. (Part No: SS92)$15.06

Rear Axle to Center Housing O-Ring - This Rear Axle to Center Housing O-Ring is used on multiple Ford New Holland Models. It is number 1 in the image. This O-Ring should always be replaced when changing brake disc on oil immersed systems. 13.50 inch inside diameter x .139 inches thick. Replaces 379313S91, 83417133, VPJ7202, 47P3852 (Part No: 379313S91)$5.00

Reverse Idler Shaft - Used on Ford New Holland 4 and 6 cylinder models with 8 speed transmissions, this shaft is 3.5 inches long. Replaces OEM numbers C7NN7140C, 81817885 (Part No: C7NN7140C)$41.88

Ring Gear, MFWD Planetary - For tractor models TW5, TW15, 8530, 8630 all with APL355. Replaces 83943737, 83958508, ZP4472354122. (Part No: ZP4472354201)$593.90

Ring Gear & Pinion Set - 16:1 ratio. For tractor models 2000 & 3000 1965-12 1973. Less 10 Speed transmission and transmission brake. (Part No: C5NN4209G)$507.81

Seal, Inner Planetary - Check Dimensions of the seal before ordering, many of the models listed used more than one axle configuration. This seal measures 2 5 8 inches insdie diameter, 3 1 2 inches outside diameter and is 1 2 inch wide. Used on the following some configurations Major, Power Major, Super Major. Replaces OEM E88GE9, 81717081, 81710683, 510E6362, 881991M1 (Part No: 881991M1)$5.48

Seal Pair - This rear axle shaft outer oil seal is for plain axle shaft with sweat collar on tractor models: 600, 700, 800, 900, 2120, 4120. 2.500 inch inside diameter, 3.500 inch outside diameter. (Part No: D5NN4115B-PAIR)$9.12

Secondary Countershaft - With a teeth count of 16-35-16, this Secondary Countershaft replaces Ford part numbers D9NN7B281CA, 81822961, C9NN7113B. It is used on Ford models: 345C, 345D, 445, 5000, 5100, 5110, 5190, 5200, 5340, 545, 545C, 545D, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7600, 7610, 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, 8010, 8240 (Part No: C9NN7113B)$144.04

Secondary Output Shaft Bearing - This Secondary Output Shaft Bearing measures 1.5000 inches inside diameter, 3.2500 inches outside diameter, 0.7500 inches width. Replaces original part numbers E53GA9, 81800632, SKF RLS 12 (Part No: E53GA9)$41.05

Secondary Output Shaft Bearing - With measurements of 19mm inside diameter, 53.9mm outside diameter, and 15.9mm this bearing and cone assembly replaces Ford New Holland part numbers D0NN7N047A, D2NN7111A, 81823619, 81823620, 81822960, 82930758, E6NN7061BA, E6NN7106AA, D0NN7N048A (Part No: D0NN7N047A)$26.55

Secondary Transmission Countershaft - This Gear has 16-34-16 teeth. It replaces Ford part numbers 81823634, D0NN7113C. This gear is used on Ford models 5000, 5100, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7610, 7700, 7710 (Part No: D0NN7113C)$311.88

Select-O-Speed Control Selector - For tractor models: 611, 671, 681, 771, 811, 871, 881, 971, 1811, 1871, 1881, (2000, 4000 4 cylinder), 2111, 4121 all 1959 and up with Select-O-Speed. (Part No: C0NN7202B)$47.61

Select-O-Speed Control Selector Cover - Fits Select-o-Speed Tractors: 1959 and later. Replaces original part numbers 313936, 81814248, C5NN7N013A. For models 1811, 1871, 1881, 2000, 2110, 3000, 3100, 3400, 3500, 4000, 4100, 4110, 4200, 4400, 4500, 5000, 5100, 5200, 611, 671, 681, 771, 811, 871, 881, 971 and 981. (Part No: C5NN7N013A)$50.46

Shaft and Coupling Assembly - Used from beginning of production through 4 1971 on Ford models 5000, 5100, 5190, 5200, 5340, all with 8 speed transmission. This part replaces Ford part numbers 81818769, C7NN7N071D, C7NN071D (Part No: C7NN071D)$154.56

Shaft, Sun Gear - For tractor models 8530, 8630, TW15, TW5 ALL with APL355. Replaces 83943736. (Part No: ZP0769126312)$421.02

Sherman Transmission External Lever - Step Up Step Down Lever. For Tractors with Sherman transmission. Replaces 10A909, 9N7210. For models 9N, 2N, 8N, NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900 and 901. (Part No: 9N7210)$93.09

Shift Boot - For tractor models 1300, 1310, 1500, 1510, 1700, 1710, 1900, 1910, 2110. See picture for dimensions. (Part No: SBA398110610)$7.49

Shift Cover Gasket - This Transmission Shift Cover Gasket is used on multiple Ford Tractors, 1965 an later with 6, 7 or 8 speed transmissions. It replaces original part numbers 82004680, 83959206, C5NN7N225C, D5NN7223B, D8NN7223AA, E6NN7223AA, E8NN7223AA. (Part No: C5NN7N225A)$3.21

Shift Cover Plate Gasket - For 4-SPEED transmissions. For tractor models 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 (1948-1964), 2000, 3000 (1965-1970). Replaces: 8N7223, D5NN7223A, 81817212, 83906320, 83958318, C7NN7223B, E6NN7223BA (Part No: 8N7223)$3.39

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Part No: NDA7223A)$5.07

Shifter Assembly, Stamped Steel - For tractor models with 6, 7 and 8 speed transmission from 10 1966 to 1975. Complete Shift Cover Assembly includes cover, levers, shifter knobs, shifter boots. DOES NOT INCLUDE GASKET. Order C5NN7N225A Gasket if needed. Replaces: Levers: C5NN7210D, C5NN7210V, Cover only: 81814737, C5NN7211F, C5NN7222L, C5NN7211E. (Part No: S.66211-LG)$91.65

Shifter Cable - This is a Sherman Transmission Shift Cable with Knob. It is 3 8 inches, 24 NF inner ends and 1 2 inch, 20 NF outer end thread. 31-1 2 inches overall length. It is used on 9N, 2N and 8N tractors with Sherman high low transmissions. (Part No: SHERMAN-1)$69.85

Shifter Plate - Dexta and Super Dexta Transmission Shifter Plate. (Part No: 957E7222)$63.31

Shift Fork - This is a 2nd and 6th Shift Fork. It replaces C5NN7231B, E8NN7231AA, 81804917, 81804928, 83974360 (Part No: E8NN7231AA)$52.15

Shift Knob - For tractor models Dexta, Super Dexta, (Major from 8 1958 up to 1964) 2100, 2600, 2610, 3000, 3100, 3120, 3400, 3600, 3610, 4000, 4110, 4140, 4400, 4410, 4500, 4600, 4610, 5000, 5110, 5200, 5600, 5610, 5640, 5900, 6410, 6600, 6610, 6810, 7100, 7200, 7600, 7610, 7740. 5 16 Inch - 24 UNF Thread. 81804882, 957E7213, NAA7209A Note, this part may arrive spherical as shown, or more flattened like BB7213A. This part is differentiated by 5 16 Inch - 24 UNF Thread. (Part No: C5NN7213A)$3.65

Shift Knob - Round Ball shift knob is 3 8 inch NF thread. For tractor models 2000, 3000, 4000, 5000, Dexta. Replaces 957E7213A, 81804882, 7W7213B (Part No: 180006M91)$2.88

Shift Knob - ThisTransmission Gear-Shift Lever Knob has is 3 8x24 fine thread female. For all 4 and 5 speed transmissions models (1950 to 1964 serial number 252844 and up). 3 8 inch NF - 24 thread. This knob may not fit aftermarket replacement levers. Verify threads if you are unsure. If 5 16 UNF thread is needed, order C5NN7213A (Part No: BB7213A)$4.58

Shift Valve to Housing Seal - Shift Valve to Housing Seal is used on 3500, 3550, 4400, 4500, 340, 340A, 340B, 420, 445, 445A, 455, 535, 540, 540A, 540B, 545, 545A, 555, 555A, 555B, 655, 655A. (Part No: C5NN7N142A)$10.96

Shim for Bearing Retainer - This is a Steel Shim, .020 thick. It has 12 holes. Will work in 6 hole applications. Fits Ford 8N, 9N, 2N, NAA and Jubilee, 8N4229F and 8N4229. More than one may be required when used as 8N4229F shim. Thickness 0.020 inches. Price is for each. (Part No: 183261M1)$3.09

Side Cover Gasket - This Side Cover Gasket fits the following tractor models as a side cover gasket and a PTO shift cover gasket: 2000, 4000, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee and NAA. Price is for each. Replaces part number 9N4131. (Part No: 9N4131)$.62

Sliding Coupling - This Sliding Coupling is used in Ford tractors 1965 and later with 6 speed transmission. Replaces C5NN7106A, 81804736 (Part No: C5NN7106A)$47.98

Spider Cross, Differential - For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, Dexta, Super Dexta. Replaces C5NN4211B, E1NN4211AA, E1NN4211AB, 81876885, 83929928 (Part No: E1NN4211AA)$42.38

Spider Cross, Differential - This differential spider cross fits multiple Ford New Holland tractors and industrials. It replaces original part numbers C5NN4211B, E1NN4211AA, E1NN4211AB, 81876885, 83929928 (Part No: E1NN4211AA)$42.38

Spider Gear - Gear, Differential Spider. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, Dexta, Major, Super Dexta, Super Major. Replaces 81728114, 957E4292B, E1ADDN4213B. (Part No: DDN4213B)$43.44

Torque Converter Drive - This Torque Converter Drive is used on 3500, 3550, 4400, 4500, 340, 340A, 340B, 420, 445, 445A, 455, 535, 540, 540A, 540B, 545, 545A, 555, 555A, 555B, 655, 655A. Replaces C7NN6N638A, C5NN6406B, 81819145 (Part No: C7NN6N638A)$110.28

Transmission 3rd / 7th Gear - Part number D2NN7N315A is the third seventh gear in 8 speed transmissions on Ford models: 5000, 5100, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7610, 7700, 7710. This gear has 34 teeth. Verify before ordering. Replaces D2NN7N315A, 81826596 (Part No: D2NN7N315A)$93.23

Transmission Bearing - Main Pilot Shaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 1801, 1821, 1841, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, 9N, NAA, Jubilee, NAB. (Part No: 9N7120)$79.51

Transmission Bearing Cone - Main Drive Shaft and Countershaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Part No: 9N7066)$13.59

Transmission Bearing Cup - Main Drive Shaft and Countershaft Bearing Cup for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Part No: 9N7067)$6.23

Transmission Case to Center Housing Gasket - For tractor models 9N, 8N, 2N. (Part No: 9N4662)$2.19

Transmission Countershaft Seal - This Transmission Countershaft Seal replaces original part number E62GE9. New Holland 81717077. It measures 2.885 inches x 1.649 inches x 0.625 inches. (Part No: E62GE9)$4.29

Transmission Drain Plug - Has 2.5 inch outside diameter. For tractors: 8N, 9N, 2N, NAA, {1939-1954}. Also filler plug for tractor: NAA {1953-1954}. Gasket available, order part number 8N7011. Replace 9N7010, 8N7010. For a magnetic version of this plug, order 8N7010 (Part No: 9N7010)$8.06

Transmission Drain Plug, Magnetic - Used on Ford tractors 1939-1964, this part has the same measurements as part number 9N7010 (2 inch-12 UN Threads) but is also magnetic to collect small metal particulate. Includes gasket. (Part No: 8N7010)$12.50

Transmission Filler Cap - This Transmission Filler Cap is used on Ford 8N Tractors. It includes a gasket. Replaces 8N7485 (Part No: 8N7485)$11.95

Transmission Filler Cap Gasket - This Transmission Filler Cap Gasket is used with 8N7486 Transmission Filler Cap. Replaces original part number 8N7037A (Part No: 8N7037A)$1.25

Transmission Filter - This transmission filter is exactly like the original, used on Select-o-Speed 601, 801, 901, 2000 and 4000 models, 1959 thru 1964. Replaces C0NN7B155A (Part No: C0NN7B155A)$26.95

Transmission Front Plate - This Transmission Front Plate replaces D2NN7N054A and D2NN7N054B. For models 5000, 7000, 5600, 6600, 7600, 5610, 6610, 7610, 8210. (Part No: D8NN7N054BA)$121.40

Transmission Front Plate - This transmission plate is for models 5000 and 6600 both with 7, 8 or 12 speed transmissions. For models with 8 speed transmission 5610S, 5640, 6610S, 6640, 6810S, 7610S, 7740, 7810S, 7840, 8240. Replaces numbers 83909540 and 14328501. C7NN7N055A (Part No: C7NN7N055A)$158.41

Transmission Front Plate Gasket - This gasket is used on 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 2610, 2910, 3610, 2910, 4610, 5610, 6610, 7610, 7710. Replaces E6NN7N057AA. (Part No: E6NN7N057AA)$7.96

Transmission Gasket Set - Transmission Gasket Set for 3 cylinder Fords, 1965 and up with 6 or 8 speed Non-Synchro Transmissions. (Part No: S.65396)$18.21

Transmission Gasket Set - This Transmission Gasket Set is used on FORD 5000, 7000, 5600, 6600, 7600, 5610, 6610, 7610 all with 6 and 8 speed non-syncro transmission. (Part No: TG5000)$20.61

Transmission Input Shaft with Dual Power - 8.78 inches long. For tractor models (5000, 7000 1 1973 and up), 5600, 6600, 6700, 7600, 7700, 5610, 5610S, 6610, 6610S, 6710, 7610, 7610S, 7710, 8010, 6640, 7740, 7840, 8240, TS90, TS100, TS110. (Part No: D2NN7017A)$202.40

Transmission Mainshaft - 28 28 teeth, 17 spline, 12 inches long. For tractor models: 2000, 2110, 2120, 231, 2600, 4000, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, Super Dexta. (Part No: 960E7061A)$201.89

Transmission Mainshaft Front Bearing - Used in the transmissions of some of the following Ford models: 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 8010, 8240, this bearing has an inside diameter of 65mm, outside diameter of 100mm and is 18mm wide. This bearing has applications not list. It replaces OEM numbers; Ford New Holland 81804635, C5NN7N046A, 5181866, Kubota 8101-06013. Landini SKF6013, 339673X1, Massey Ferguson 339673X1, Yanmar 24101-060134, Zetor 971014, 971019 (Part No: C5NN7N046A)$27.00

Transmission Oil Cooler - For tractor models (231, 233, 333, 335, 531, 532, 2600, 3600, 4600 less cab), (7000 6 1973 and up). (Part No: D3NNH860A)$271.25

Transmission Oil Dipstick - Also replaces E1NN7A020BA, D3NN7A020B and 81842758. For models: 340A, 340B, 345C, 345D, 515, 535, 540, 545, 230A, 231, 2310, 233, 234, 250C, 260C, 2600, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 3430, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 445A, 4600, 4610, 4630, 4830, 5030, 530A, 531, 532. (Part No: 83929967)$6.48

Transmission Oil Pump - For tractor models 550, 555, 555A, 555B, 655, 655A, (340, 340A, 340B, 445, 445A, 450, 540, 540A, 540B, 545, 545A ALL WITH POWER REVERSE TRANSMISSION), (3000 series, 3500, 3550, 4000 series, 4410, 4500 ALL 1 1 1965 and Newer), (420, 532, 535 ALL 1 1 1975 and newer), 455 (7 1987 to 11 1988), with power reverse transmission. Replaces 530718M92, C5NN7A103F, D2NN7A103A, E4NN7A103AA, 86516596. (Part No: 86516596)$269.87

Transmission Oil Tube - Used on Ford 5600, 5700, 6600, 6700, 7600, 7700 tractors, this Transmission Lubrication Tube replaces Ford part numbers D8NN7N460BA, 83918315 (Part No: D8NN7N460BA)$55.19

Transmission Output Shaft Seal - Measures 39.4mm inside diameter x 60.3mm outside diameter x 12.7mm wide. It replaces C5NN77086A, 81808572, D66412, D40772, 363514R93, 70800166, ATY3988, ATY4067, AM848T, AP19243H, ATY4124, 1860325M1, 195506M1, 1077452M1 (Part No: C5NN77086A)$4.02

Transmission Output Shaft Seal - Measures 39.4mm inside diameter x 60.3mm outside diameter x 12.7mm wide. It replaces C5NN77086A, 81808572, D66412, D40772, 363514R93, 70800166, ATY3988, ATY4067, AM848T, AP19243H, ATY4124, 1860325M1, 195506M1, 1077452M1 (Part No: C5NN77086A)$4.02

Transmission Output Shaft Seal - Measures 39.4mm inside diameter x 60.3mm outside diameter x 12.7mm wide. It replaces C5NN77086A, 81808572, D66412, D40772, 363514R93, 70800166, ATY3988, ATY4067, AM848T, AP19243H, ATY4124, 1860325M1, 195506M1, 1077452M1 (Part No: C5NN77086A)$4.02

Transmission Pump Seal - This Transmission Pump Seal is used on 3500, 3550, 4400, 4500, 340, 340A, 340B, 420, 445, 445A, 455, 535, 540, 540A, 540B, 545, 545A, 555, 555A, 555B, 655, 655A. It replaces D8NN7N089AA and 83914017 (Part No: D8NN7N089AA)$8.01

Transmission Pump Seal - This O-Ring is used for mounting Transmission Pump. Replaces 1754392M1, 1754392V1, 1754392M1, 81816228, 1P77836A (Part No: 81816228)$4.41

Transmission Rear Coupling - This a a paired set used on many Ford New Holland Models. Replaces OEM part numbers 83908698, 82983825, 83960027, E6NN7N072BA, D6NN7N072B (Part No: E6NN7N072BA)$55.79

Transmission Rear Coupling - This a a paired set used on many Ford New Holland Models. Replaces OEM part numbers 83908698, 82983825, 83960027, E6NN7N072BA, D6NN7N072B (Part No: E6NN7N072BA)$55.79

Transmission Rebuild Kit - For tractor models 9N, 2N and 8N with 3 and 4 speed transmissions (1939-1952). Will also work for Jubilee except for the transmission to rear end gasket. This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. Contains (2) 9N7086, (1) 9N4662, (1) D5NN7223A, (1) 9N7223B, (1) 8N7052A, (1) 15385-TIM, (4) 25877, (4) 25820-TIM. Replaces: 9N7066, 86516471, 9N7086, 9N7086A, 9N7086GV, 9N7120, 9N7120GV, 81804773, 8N7052A, 8N7052A2, C0NN7052A, 83945495, 9N7067, 9N7067GV, 517512, 241336, 605188, 9605470, 9N4662, 9N4662GV, 9N7223, 9N7223B, 8N7223, D5NN7223A, E6NN7223BA, 83958318, 81817212. (Part No: TSBK3952)$162.15

Transmission Rebuild Kit - For NAA (Golden Jubilee) 1953-54. This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. (Part No: TSBK5354)$171.64

U-Bolt - U-bolts. For 2910, 3910, 4110, 4610 (Part No: F-UBOLT)$10.51

 
Electrical System
(Starters, Generators, Coils, Wiring, etc.)
12 Volt Conversion Kit - 12 Volt Conversion Kit - NAA, Jubilee. Includes rebuilt unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness, resistor and instructions. Updates older 6-volt tractors to 12-volt charging system. Does not require a 12 volt coil. Comes with everything needed to convert to a 12 volt starting system except for a battery. (Part No: NAA10300ALT)$95.57

12 Volt Conversion Kit - For 4 cylinder gas engines on 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, all pre 1965. Not for industrial or diesel tractors. Includes unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness and instructions. Updates older 6-volt tractors to 12-volt charging system. Does not contain coil as the ignition system remains at 6 volts. If your proofmeter is driven off your generator, this alternator does NOT have tach drive. (Part No: 5564-10300ALT)$104.50

12 Volt Conversion Kit - For tractor models 2000 3 Cylinder, 3000 3 Cylinder, 4000 3 Cylinder, 5000, 7000. 1965 and up, Gas and Diesel. Converts 6-volt systems to 12-volt and updates older 12 volt tractors- Replaces Lucas Generator. Includes new unicharge alternator (12 Volt, 63 Amp, Internally Regulated) with pulley and internal self exciting regulator, brackets, wiring harness and instructions. Includes Tach Drive. Replaces 87406904R. (Part No: 6X10300ALTH)$338.61

12 Volt Conversion Kit, Front Mount Distributor - 8N, 9N, 2N. Updates older 6-volt tractors to 12-volt charging system. For 9N, 2N, (early 8N 1948-1951) with Front Mount Distributor (distributor is right behind radiator), to serial number 263843. Kit includes rebuilt unicharge alternator with pulley and self exciting regulator, resistor, 12 Volt coil, wiring harness, top alternator bracket, alternator base bracket, alternator adjusting arm, belt, and instructions. Note, using the brackets in this kit may require trimming of the conduit your spark plug wires run through. Many tractors no longer have this conduit. If you would like avoid the possibility of have to make that minor modification, use 8NE10302-F top bracket (not included). Will not work if you have a magneto. (Part No: 8NE10300ALT-C)$164.43

12 Volt Conversion Kit, Side Mount Distributor - For Late 8N Tractors with side mount distributors(mounted at an angle near front of engine). Updates older 6-volt tractors to 12-volt charging system. Kit includes: Unicharge alternator w-pulley, Electrical resistor, (Resistor is used if you use your 6 volt coil - OR you can install a 12 volt coil (No coils included) and NOT use this resistor) wiring harness, top alternator bracket, base alternator bracket, alternator adjusting arm, Misc Bolts Nuts Instructions. (Part No: 8NL10300ALT)$150.05

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. (Part No: ALTERNATOR)$0.00

Alternator - 12 volt, 37 amp. For tractor models 230A, 231, 233, 234, 2600N, 2600R, 2600V, 333, 334, (335 from 1975-1978 & 1983-1984), 340, 340A, 340B, 3600N, 3600NO, 3600R, 3600V, 3610NO, 3900, 3910H, 3910N, 3910R, 4110N, 420, 445, 445A, 4600NO, 4600O, 4600SU, 4610O, 4610SU, 515, 530A, 531, 532, 535, 550, 6410, 6600C, 6600O, 6610O, 4600C, 7610O, 7700, 7710, 8000, 8600, 8700, 9000, 9600, 9700, A62, A64, A66, TW10, TW20, TW30. Replaces 89NY10300AA, D5NN10300A, D5NN10300BA, D5NN10300D, D5NN10300E, D5NN10300ER, 8AL2049K, 8AL2056K (Part No: D5NN10300E)$90.22

Alternator - 12 volt, 90 amp. For tractor models (FW20 1977-82 with Cummins 8-555), (FW30 1977-82 with Cummins 8-903), (FW40 1977-79 with Cummins 8-903), (FW60 1977-82 with Cummins 8-903), (1156 1988-92 with Cummins dsl). All Delco equipped. Replaces 1117732. (Part No: ADR0013)$289.54

Alternator - 12 volt, 105 amp. For tractor models (276 1986-92 with 4-239 dsl), (9030 1990-98 with 4-268 dsl). Replaces 1105609, 1105539. (Part No: ADR0195)$110.33

Alternator - 12 volt, 70 amp. For tractor models (3230 1990-95 with 3-192 dsl), (3430 1990-98 with 3-192 dsl), (3930 1990-96 with 3-201 dsl), (4630 1989-96 with 3-201 dsl), (5030 1992-96 with 4-256 dsl), (5610 1986-92 with 4-256 dsl), (5640 1992-93 with 4-268 dsl), (6610 1986-92 with 4-268 dsl), (6640 1992-93 with 4-304 dsl), (7610 1987-91 with 4-268 dsl), (7710 1986-87 with 4-268 dsl), (7740 1992-93 with 4-304 dsl), (7840 1992-93 with 6-401 dsl), (8240 1992-93 6-456 dsl), (8340 1992-93 with 6-456 dsl). All Marelli equipped. Replaces 63324274, 63324273.ALU0007 (Part No: E7NN10B376BB)$79.53

Alternator - 12 volt, 100 amp. For tractor models (5640SLE 1994-97 with 4-268 dsl), (6640SLE, 7740SLE 1994-97 with 4-304 dsl), (7840SLE 1994-97 with 6-401 dsl), (8160 1996-98 with 6-456 dsl), (8240SLE, 8340SLE 1994-97 with 6-456 dsl), (8260, 8360, 8560 1996-98 with 6-456 dsl). All Marreli equipped. Replaces 63321285. (Part No: ALU0008)$230.98

Alternator - 12 volt, 130 amp. For tractor models (8670, 8770, 8870, 8970 1993-98 with 6-456 dsl), (9280 1994-96 with 6-611 dsl), (9680, 9880 1994-96 with 6-855 dsl). Replaces 19010178. (Part No: ADR0046)$106.37

Alternator - 12 volt, 100 amp. For tractor models 8160, 8260, 8360, 8560. Replaces 82002329. (Part No: 82010243)$310.65

Alternator - 12 volt, 40 amp. For tractor models 1320, 1520, 1530, 1620, 1630, 1715, 1720, 1725, 1920, 1925, (2120 1987-2002), 3415, L465, L554, L565, LS140, LS150, LS170, (LX465, LX485, LX565, LX665 1994-1999 with 843 or 844 New Holland engine), TC25, TC25D, TC29, TC29D, TC29DA, TC30, TC33, TC33D, TC33DA, TC35, TC35D, TC35DA, TC40, TC40D, TC40DA, TC45, TC45D, TC45DA. Replaces SBA185046201, SBA185046200. (Part No: SBA185046320)$96.95

Alternator - Alternator, 100 amp, 12 volt. Ford New Holland Tractors: 5640, 5640SLE, 6530, 6530SLE, 6640, 6640SLE, 7740, 7740SLE, 7840, 7840SLE, 8240, 8240SLE, 8340, 8340SLE, TS90, TS100, TS110. Replaces 82003307, 82010242, F0NN10B376BA, F0NN10B376BB, F2NN10B376AA (Part No: 82010242)$191.87

Alternator - This is a 70 amp unit with battery sensor. D+, D+, B+ and W terminals. Has 'Lucor' connector as well under plastic terminal protector. It replaces 81863039, 82857207, E7NN10B376AB, F0NN10B376BB, 54022336, 54022336D, 63324273, LRA02690, MG0283, MG283, MAN141 (Part No: 81863039)$82.73

Alternator - This is a 12 volt, 33 amp, Internally Regulated, External Fan, Clockwise, Iskra style. Replaces 4762563, 4766127, 4998353, 5101645, 9972269 (Part No: 5101645)$166.82

Alternator - This new alternator is 12 volt, 63 amp, Delco 10SI type with self exciting regulator. For 2000, 4000, 600, 700, 800, 900. Also used with many other models for 12 volt conversion. Replaces 5564-10305SE. (Part No: 8NE10305SE)$79.69

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)$76.69

Alternator, 12 Volt - 12 Volt, 63 Amp Alternator replacement for systems that have been previously modified to 12 volts. Does not include hardware. Simple 1-wire "self exciting" alternator has internal voltage regulator (easy to wire). 10SI Type Configuration. (Part No: 8NE10305SE)$76.69

Alternator Adjustable Arm - Alternator Adjusting Arm. For alternator conversion on the following tractors (1953 to 1964): NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. (Part No: NAA10303)$9.20

Alternator Adjustable Arm - Alternator Adjusting Arm. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Part No: 8NE10304)$9.20

Alternator Adjustable Arm - Alternator Adjusting Arm. For 8N Late with Side Mount Distributor. (Part No: 8NL10304)$6.96

Alternator Base Bracket - Alternator Base Bracket. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Part No: 8NE10303)$11.91

Alternator Base Bracket - Base Alternator Bracket. For 8N Late using Side Mount Distributors. (Part No: 8NL10303)$10.74

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. Can be used with our 8NE10305SE alternator. (Part No: 2348258)$33.75

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. (Part No: 2348258)$33.75

Alternator Bracket, Base - Base alternator bracket. For NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. All 1953 to 1964. (Part No: NAA10302)$10.74

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: ADR9209)$13.67

Alternator New - Alternator Assembly, 70 amp. For 250C, 260C, 3230, 3430, 345C, 345D, 3930, 4130, 445C, 445D, 455C, 455D, 4639, 4830, 5030, 545C, 545D, 555C, 555D, 5610S, 575D, 655C, 655D, 6610S, 675D, 7010S, 7610S, 7810S, 8010. (Part No: E7NN10B376BB)$79.53

Alternator New - Alternator assembly, 65 amp. For tractor models 555E, 575E, 655E, 655, 675E, 775. (Part No: 87800219)$131.00

Alternator, New - Our New replacement alternator is 12 volts, 35 amp, externally regulator Denso type with three (3) ear mount. Features B+ post and one (1) three wire-single plug connector with E (ground), F (+ from reg), and N (AC) spades. Used on Ford compact models 1210, 1310, 1510, 1710. Replaces Hitachi units. Replaces SBA185046180, 15451-64010, 15763-64010, 15763-64011, 15763-64012, 27020-1201 (Part No: SBA185046180)$121.78

Alternator New Lucas With Pulley - New Lucas Alternator Assembly, 12-volt, 45 amp with pulley and fan. For industrials: LS190, LX985~ tractors: 5640, 6640, 7740, 7840, 8240, 8340. For 5640, 6640, 7740, 7840, 8240, 8340, LS190, LX985. (Part No: 82001260)$140.33

Alternator Pulley - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. All using 12 Volt conversion kits with a Delco single wire alternator. Pulley, single groove 5 8 inches wide. The diameter varies from our different suppliers. This measures about 2 5 8 inches outside diameter, give or take about a 1 4 inch. This should be fine and within the adjustability of the Alternator Adjusting Arm. Replaces 98NAA5825. (Part No: AFD5035)$10.74

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7 8 inches wide, 1-1 2 inch offset, 8-1 4 inch from farthest end of slot to center of mounting hole, 3-3 4 inch slot length, 3 8 inch mounting hole. (Part No: 8NL10302)$12.29

Alternator Top Bracket - Alternator Top Mounting Bracket. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Part No: 8NE10302)$9.20

Alternator Top Bracket - When Converting your 9N, 2N or early 8N tractors with front mount distributor, to an alternator, this bracket can be used instead of 8NE10302 to avoid the possibility of having trim the spark plug wire conduit. (Part No: 8NE10302-F)$29.50

Alternator Top Bracket - Top Alternator Bracket. For 8N late with Side Mount Distributor. (Part No: 8NL10302)$12.29

Alternator with Tach Drive - The is a 12 volt 63 amp alternator. It is internally regulated and comes with fan and pulley. This alternator can be used to replace original generator. Additional brackets and hardware may be needed. See kit 6X10300ALTH. Used on Ford Tractors 1965 and later. Use part number ADR9209 to make this a single wire self exciting alternator (not included). (Part No: ADR0382)$108.27

Base Alternator Bracket - Base Alternator Bracket. For 8N, 9N, 2N. (Part No: 8NE10303)$11.91

Battery Cable - Battery Cable less boot, 36-1 2 inches long, battery to relay, 2 Gauge. For tractor models 2000, 2310, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5200, 5600, 5610, 6600, 6610, 7000, 7610. (Part No: D2NN14300C)$30.12

Battery Cable - This Battery Cable is red, 34 inch, 2 Gauge, and usually used as battery to ground. For 2000, 2310, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4600, 4610, 5000, 5110, 5600, 5610, 5910, 6410, 6600, 6610, 6810, 7600. (Part No: C7NN14301C)$18.98

Battery Cable - Cable, battery to starter switch, 12-volt, 12-1 2 inches. For tractor models 2000, 4000, 501, 601, 701, 801, 901. (Part No: D1NN14300F)$12.56

Battery Cable - 2 gauge. For tractor models 9N, 2N (from 1940). This cable is a battery to starter and is 21 inches long. (Part No: 9N14300C)$17.24

Battery Cable - For 8N, 9N, 2N. Ground Strap. 5.5 inches center to center. (Part No: D1NN14301H)$14.18

Battery Cable - For 8N 1948-1952, Jubilee, (NAA, 600, 700, 800, 900. All 1953 and later. Ground Strap. 6 volt, 11 inches long. (Part No: FAE14301B)$14.90

Battery Cable - This Battery Cable is 12 1 2 inches long and is 2 Gauge. For models (600, 700, 800, 900, 1958-1964), (2000, 4000 all before 1964). Ground Cable. (Part No: D1NN14301G)$11.70

Battery Cable - For (600, 700, 800, 900), (2000, 4000 before 1964). Starter to Battery Cable. 12 Volt, 17 inches Long. (Part No: 311228)$14.03

Battery Cable - For NAA, Jubilee, 600, 700, 800, 900. All 1953 and up. Cable, 9 inches long. (Part No: D1NN14300G)$11.67

Battery Cable Cover - Rubber cover, battery cable to starter solenoid. For tractors: 8N, Jubilee, NAA {1948-1953}. Replaces: 81826317, 86H14321A, C0NN14321A, C7NN14321A, S115407 (Part No: 86H14321A)$11.95

Battery Hold Down - Bolt with nut. For tractor models 2000, 4000, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 8N. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: NCA10728WN)$3.95

Battery Hold Down - Used with batteries 16-1 4 inches long x 7-5 8 inches wide. For tractor models: 501, 601, 701, 801, 901 all with 4 cylinder engines from 1958 and up with 12 volt systems. (Part No: 311099)$26.94

Battery Hold Down Bolt - Bolt with nut. For tractor models 8N, NAA (1948-1954). (Part No: 8N10728WN)$4.50

Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)$35.98

Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)$53.81

Battery to Starter Cable - For model 8N, 1939-1952. Starter to Battery Cable. 10.5 inches Long, 2 Gauge, 7 16 Diameter. (Part No: 8N14300B)$11.09

Bearing, Generator Front - BEARING, BALL Bearing, Generator, Front End. For 3 Brush Generator. For early 8N, 9N, 2N. Measures .59 inches inside diameter and 1 3 8 outside diameter. Verify Measurements. (Part No: E27N10094B)$10.18

BLOWER MOTOR - NEW HOLLAND: Blower motor only, original Fasco replacement motor, 12 volt single speed 2 wire motor with 5 16 inch shafts. TM115, TM120, TM125, TM130, TM135, TM140, TM150, TM155, TM165, TM175, TM190, TS90, TS100, TS110, TS115, 8160, 8240, 8260, 8340, 8360, 8560, 5640, 6640, 7740, 7840. (Part No: 81870361)$177.36

Blower motor assembly - Blower motor assembly complete, 12-volt, "NEW". Mounting base length 14-3 4", mounting base width 6-1 2", overall width 7-3 4", overall height 7". Tractors: TG215, TG245, TG275, TG305, TJ280, TJ330, TJ275, TJ325, TJ375, TJ380, TJ430, TJ500, TJ530, TJ480, T8010, T8020, T8030, T8040, T8050, T9020, T9030, T9040, T9050, T9060, TG210, TG230, TG255, TG285. (Part No: 84222524)$305.78

Blower Wheel - Blower wheel, counterclockwise - 4-1 4 inch diameter wheel, 3 8 inch shaft. Offset - 2 1 4 inches and 3 1 2 inches. Used on Ford models: 6610, 6810, 7410, 7610, 7700, 7710, 7810, 7910, 8700, 9700, TW10, TW20, TW30, 550, 555, 555A, 555B Replaces D5NN18459A. (Part No: 539018R2)$32.70

Cable Clip - This Battery Cable Clip holds the solenoid-to-starter cable to the air cleaner tube. It fits a 1 5 8 inch air cleaner tube. Used on Ford Tractors, 1953 to 1964. (Part No: 1A13377A)$2.95

Cable, Starter to Switch - Switch to starter cable, 14-1 2 inches long and 2 gauge. For 9N, 2N, 601, 701, 801, 901, 600, 700, 800, 900, NAA, 2000, 2031, 2111, 2120, 2131, 4000, 4030, 4031, 4040, 4120, 4130, 4140, 501, 541. Replaces FAA14431B. (Part No: 9N14431B)$10.67

Cigar Lighter Assembly - Complete with mounting bracket. Original accessory cigar element well, knob and wire. Ready to mount. For all models 1939-1954 (Part No: 8N9004601A)$42.50

Clip - Clip for 7 16 inch hole. Electric wiring to instrument panel support bracket 1948-1952. 1 required, main wiring assembly to instrument panel brace 1 required, wiring to hood top reinforcement 1950-1952. 3 required. For model 8N (1948-1952). (Part No: 51C14197)$2.95

Clip - Clip for 17 32 inch hole. Electrical wiring to instrument panel brace 1 required. For model 8N. (Part No: 8N14197)$9.95

Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1 2 inches diameter. (Part No: 28010)$31.47

Coil, 12-Volt - For 8N, 9N, 2N (serial number up to 263843. Front Mount Distributor 12 Volts. Order 9N12104 gasket set separately if mounting gasket is needed. Replaces 9N12024-12V. (Part No: 12VOLTCOIL)$27.03

Coil, Ignition 12V - Ignition Coil. This coil is used with an External Resistor if needed. Replaces OEM part numbers Case International Harvester - 353875R91, 395331R91, 106230C91, 385403R91, AT10399, 189673M92, 189673V2. (Part No: D8JL12029A)$9.92

Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models. (Part No: D4PE12029AA)$12.06

Coil - Six Volt - This Ignition Coil is an exact replica of the original used in Ford Tractors, 1950 to 1964. The coil wire connection has a longer snout and will require some modifying of most wire sets. It replaces: 8BA12029, D0PF12029A, D3PF12029AA, E8T12029BA. (Part No: 8BA12029)$36.71

Coil - Six Volt - For tractor models 8N (1939-1950), 9N, 2N with Front Mount Distributor. Order 9N12104 gasket set separately if mounting gasket is needed. (Part No: 9N12024)$14.30

Coil - Six Volt with Script - The is an officially licensed Ford 6 Volt Coil, with raised Ford script. Replaces 9N12024. Order 9N12104 gasket set separately if mounting gasket is needed. (Part No: 9N12024S)$36.71

Coil Wire Assembly - This Coil Wire Assembly is just like the original used on 8N serial number above 263842 and NAA, Jubilee. It replaces original part number 7RA14302. (Part No: 7RA14302)$8.94

Coil Wire Assembly - This Coil to Distributor Wire is exactly like the original, with molded ends. Used on Ford 4 Cylinder tractors from 1955-1965. Replaces original part number FDN14302A. (Part No: FDN14302A)$7.80

Condenser - Fits 8N, 9N, 2N with Front Mount Distributor. (Part No: A0NN12300A)$2.31

Condenser - For NAA, NAB, Jubilee, 8N with Side Mount Distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901), (2000, 4000 ALL <1964). (Part No: FET12300A)$3.15

Control Box - For tractor models Dexta, Major, Power Major, Super Dexta, Super Major all after serial number 957E-58225. 5 CONDUCTORS. (Part No: E27N10505F-Late)$72.04

Control Box - Control Box - For tractor models Dexta and Super Dexta 01 57-10 62, Major 02 1960-12 1964, Power Major, Super Major all before serial number 957E-58225. 4 CONDUCTORS. Can Replace OEM number 81718302. (Part No: E27N10505F)$48.58

Distributor - For 8N serial number 263844 and up - side mount. This distributor works with D8NN12171AA point set (included). Electronic ignition not available at this time. (Part No: 8N12127B-WCR)$145.80

Distributor - With Slotted Drive Shaft. For tractor models NAA, Jubilee. Comes with cap, rotor, dust cover, points, condenser, etc, and ready to drop in. Replaces 86643560, FAC12127D (Part No: FAC1212D)$140.00

Distributor - With 12 tooth Helican Gear for Ford with 4 cylinder gas engine, 1955-1964, with Hex Shaped Shaft. Comes with Points and Cap. Replaces 311185. Can use Pertronix Electronic Ignition number 1244A if desired. (Part No: FDN12127A)$140.69

Distributor Assembly, Complete - This new, Complete Distributor is an improved design using a Mechanical Advance. Fits Ford 3 cylinder tractors from 1965-1980. Fits 2000, 2100, 2110, 2120, 2150, 2300, 230A, 2310, 234, 2600N, 2600R, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3550, 3600, 3600N, 3600NO, 3600R, 3600V, 3610, 3610NO, 3910H, 3910N, 3910R, 4000, 4100, 4110, 4110N, 4140, 420, 4200, 4330, 4340, 4400, 445, 445A, 450, 4500, 4600NO, 4600O, 4600SU, 4610N, 4610NO, 4610O, 4610SU. Tune-up parts interchange with the original. Replaces 47573265, 47821367, C7NF12127D, F0NN12100AA, F1NN12100AA. (Part No: F1NN12100AA)$141.28

Distributor Assembly, Complete - For 9N, 2N, (8N all front mount serial number up to 263843). Includes: points, condenser and distributor cap. Does not include coil or mounting gaskets. (Part No: 9N12100)$102.75

Distributor Breaker Plate - Breaker Assembly, complete with points. For 8N, 9N, 2N. For Front Mount Distributor. Please note that suppliers have been replacing distributors, distributor base assemblies and breaker plates with after market parts for some time and the mounting screw that comes into the side of the distributor is slightly higher. This may require some modification if your mounting screw does not line-up. (Part No: 9N12150)$29.64

Distributor, Breaker Plate - 4 Cylinder. Breaker Plate with points and condenser. For NAA, NAB, Jubilee, 8N with Side Mount Distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Part No: FAD12152A)$42.35

Distributor Breaker Plate Retainer Clip - For tractor models 8N, 9N, 2N (Front Mounted Distributor). (Part No: 91A12146)$2.21

Distributor Bushing - This Distributor Bushing is used on Ford tractors 1953-1964. Brass, measures 0.470 inch inside diameter x 0.596 inch outside diameter x 0.88 inches long. Replaces original part number 7RA12132A. (Part No: 7RA12132A)$4.95

Distributor Bushing and Shim Kit - Distributor Bushing and Shim Kit. Fits tractor models all 1953 to 1964: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, [2110, 2120, 4030, 4110, 4130, 4140 4-cylinder], 2111, 2121, 2130, 2131, 4000 4 cylinder, 4031, 4040, 4120, 4121, 4131, 501, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, NAB. Replaces: Roll pin part number 60132, bushing part number 7RA12132A, thrust washer part number FAA12179A, seal part numbers 12476 and D8NN12A118AA, O-ring part numbers 87055 and 134372. This is a 5-piece kit. NOTE: Bushing must be sized to the shaft after installation. (Part No: FDS3253)$33.83

Distributor Bushing and Shim Kit - Distributor Bushing and Shim Kit. fits tractor models all 1953 to 1964: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, [2110, 2120, 4030, 4110, 4130, 4140 4-cylinder], 2111, 2121, 2130, 2131, 4000 4 cylinder, 4031, 4040, 4120, 4121, 4131, 501, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, NAB. Replaces: Roll pin part number 60132, bushing part number 7RA12132A, thrust washer part number FAA12179A, seal part numbers 12476 and D8NN12A118AA, O-ring part numbers 87055 and 134372. This is a 5-piece kit. NOTE: Bushing must be sized to the shaft after installation. (Part No: FDS3253)$33.83

Distributor Bushing, FRONT - Front Distributor Bushing is for FRONT MOUNT DISTRIBUTOR only. For 9N, 2N, early 8N. (Part No: 9N12120)$2.54

Distributor Bushing, REAR - Bushing, (rear), for Front Mount Distributor, 8N, 9N, 2N. (Part No: 18-12132)$4.95

Distributor Cam and Weight Assembly - Cam and Weight Assembly for 8N12127B-WCR original style Side Mount Distributor. For use on models 8N after serial number 263844, 1950 thru 1952. Note the direction of the weights in the picture. You may receive what is in the picture or you may receive the weights facing the opposite directions. They both work exactly the same. (Part No: 8N12176)$62.10

Distributor, Cam and Weights Assembly - Distributor Shaft with Cam and Weights attached for 9N12100 Front Mounted Distributor. For use on Ford tractor models 9N, 2N, and 8N before serial number 263843, 1939 to 1950. (Part No: 9N12187)$86.40

Distributor Cap - Distributor Cap for 3-cylinder engine on: 2000, 2600, 3000, 3600, 4000, 4100, 4600. (Part No: C5NF12106A)$10.74

Distributor Cap - For tractor models 8N, 9N, 2N to serial number 263843 all with Front Mount Distributor. Distributor Cap. (Part No: 9N12106C)$12.24

Distributor Cap, Clip Held - Cap. Used ONLY on OLDER Tisco (Prestolite) replacement distributors (Through January 1987) for Late 8N with Side Mount Distributor. (Part No: IBK1009)$26.39

Distributor Cap, Clip Held - Fits Tractors: 8N serial number 263844 (side mount), Jubilee, NAA, 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 series (4 cylinder). (Part No: NCA12106A)$6.09

Distributor Cap, Lucas - Cap has threaded terminals. Fits LUCAS Distributor on Dexta and Super Dexta Gas Tractors. (Part No: 829937M1)$30.51

Distributor Cap Terminal Kit - Distributor Cap Terminal kit for 8N, 9N, 2N with Front Mount Distributor Electronic Ignition Conversion Kit. (Part No: 1247XTTERM)$19.38

Distributor Cap with Pertronix Coil Modification - Pertronix Distributor Cap for 8N, 9N, 2N with Front Mount Distributor THAT HAS BEEN CONVERTED TO AUTOMOTIVE STYLE KIT WITH A PERTRONIX 1247XT KIT. (Part No: 1247XTCAP)$30.20

Distributor Clamp Rivet - This Distributor Clamp Rivet is used to secure part number 7RA12144 to the distributor. Used on Ford tractor models: 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 501, 800, 801, 900, 901, 1801, 2000 and 4000, 1950-1964. It replaces B12145, B-12145. (Part No: B12145)$0.95

Distributor Clip Pair - For tractor models 8N, 9N, 2N (Early). Price is for two. Replaces 9N12144. (Part No: 9N12144)$3.17

Distributor Coil Bail - For tractor models 8N, 9N, 2N with Front Mount Distributor. (Part No: 9N12137)$2.07

Distributor Drive Gear - For tractor models 8N, 9N, 2N. Gear for Distributor Drive On Camshaft (Part No: 7RA6255)$28.10

Distributor Drive Gear - For 8N with Side Mount Distributor, tractor serial number 263844 and above. (Part No: 7RA12390C)$33.75

Distributor Driven Gear - For tractor models NAA, Jubilee, 600, 800, 900, 2000, 4000. All 4 Cylinder. (Part No: FAD12390A)$44.89

Distributor Dust Cap - Fits 4-cylinder gas engines on (1950-1964): 8N Side Mount Distributor, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. Includes FAA12114A Gasket. Replaces FAA12239A, 501308, 86588587 (Part No: FAA12239A)$4.19

Distributor Dust Cover Assembly - Dust Cover Assembly for Distributor Breaker. For 3 and 4 cylinder gas engines. Tractors with Motorcraft Distributor: 2000, 3000, 4000, 5000 (1965-1974), 2600, 3600, 4100, 4600, 5600, 6600 (1975 and up). Replaces C5NF12239A. (Part No: C7NF12239A)$25.41

Distributor Dust Cover Seal - Seal for part number C7NF12239A. Replaces: 238-5147; 47107952; 70926559; V120471; X3430402; 190003120871; 379225S91; 383018R1; 81816534; 83972230; 87148S91; 87759736; 87760685; V48164 (Part No: S.11453)$1.38

Distributor Gasket Kit - For tractor models 8N, 9N, 2N prior to serial number 263844. Kit contains distributor breaker cover gasket, distributor base gasket, distributor coil base gasket, cap gasket. Replaces: 9N12104, 91A12114, 9N12140A, 9N12143, 9N12276B (Part No: 9N12104)$4.49

Distributor Point Set - Point set, Blue Streak premium quality. For tractor models 8N, 9N, 2N (Early). (Part No: A0NN12107ABS)$24.15

Distributor Point Set, 4-Cylinder - For FDN12127A and 311185 distributor used on NAA, NAB, Jubilee, 8N with Side Mount Distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Part No: D8NN12171AA)$3.81

Distributor Power Inlet Screw Kit - This kit contains 350032S screw, 7RA12234 insulator, 7RA12233 bushing, # 10 flat washer and 2 10-32 nuts. This kit is used in conjunction with 8N12209 Primary Conductor, not included. It is used on Ford 8N serial number above 263843, NAA, Jubilee, 600, 601, 501, 700, 701, 800, 801, 900, 901, 2000, 4000, 6000 and 1801 produced 1950-1964. (Part No: 350032-KIT)$4.95

Distributor Primary Conductor - Copper. Screw and insulator kit are available separately as part number 350032-KIT. Fits tractor models: Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1881, 2000 4 cylinder, 2030, 2031, 2111, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 4 cylinder gas, LP thru 1964. 8N serial number 263844 and up 1950-1952 with side mounted distributor. Replaces: 8N12209. (Part No: 8N12209)$5.40

Distributor, Rebuilt - Complete Remanufactured Distributor for Ford 3 cylinder tractors from 1965 to 1980 with distributor 47573265, 47821367, C7NF12127D, F0NN12100AA, F1NN12100AA, C5NF12127B. Does not include the Vacuum Advance. Vacuum Advance is not available. F1NN12100AA is available new with a Mechanical Advance. A refundable $80.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Also NOTE: That if the core is not a complete and good core, part or all of the core charge will not be refunded. Typically, most cores need a shaft replacement and the cost of the shaft will be deducted from the core charge. This is usually $30. (Part No: C7NF12127D)$174.41

Distributor, Rebuilt - Complete Remanufactured Distributor for Ford with 4 cylinder gas engine, 1955 to 1964, with Hex Shaped Shaft. Replaces FDN12127A and 311185. A refundable $80.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Also NOTE: Note that if the core is not a complete and good core, part or all of the core charge will not be refunded. Typically, most cores need a shaft replacement and the cost of the shaft will be deducted from the core charge. This is usually $30. (Part No: FDN12127AR)$207.50

Distributor Rotor - Rotor. Used ONLY on OLDER Tisco replacement distributors (Through January 1987) for late 8N Side Mount Distributors. (Part No: IGP1016D)$18.41

Distributor Rotor - Rotor. Fits 2000, 3000 and 4000 1965 and up. Fits 2600, 3600, 4100 and 4600 1975 and up. Fits 5000 1965-1975. Fits 5600, 6000 1975 and up. Replaces 21A355, C5NF12200A, 500868, C5NF12200AGV. (Part No: C5NF12200A)$4.29

Distributor Rotor Clip - For tractor models (8N serial number 263844 and up), NAA, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder through 1964). All with Side Mount Distributor. (Part No: 8N12213)$2.99

Distributor Rotor, Front Mount Distributor - Fits 8N, 9N, 2N with Front Mount Distributor. (Part No: B2NN12200A)$3.84

Distributor Rotor, Side Mount Distributor - 4-Cylinder. Fits the following gas tractors up to 1964: 8N with Side Mount Distributor, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: C0NN12200A)$2.27

Distributor Shaft Assembly - Distributor Shaft Assembly. For use on models 8N after serial number 263844, 1950 thru 1952. Drilling is required for the pin holes to install the distributor gear and collar. (Part No: 8N12175)$62.19

Distributor Shaft Bushing - This Distributor Shaft Bushing is used in Side Mount Distributors, 8N serial number after 263843. Replaces original part number 8N12120. (Part No: 8N12120)$4.95

Electronic Ignition Conversion Kit - 12V Neg (3 cyl eng) - Pertronix Electronic Ignition kit for the following tractors using 3-cylinder gas engine: 2000, 2100, 2110, 3000, 3100, 3400, 4000, 4100, 4140, 4200. Distributor Dust Cover is not used with this kit. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1231)$109.65

Electronic Ignition Conversion Kit -12V Negative Ground - Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system.. For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser, also includes 40, 000 volt coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1247XT)$213.83

Electronic Ignition Conversion Kit, 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor), NAA, Jubilee, (501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1244A)$106.22

Electronic Ignition Conversion Kit, 12 volt negative ground - Electronic Ignition Conversion Kit - For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1247)$122.20

Electronic Ignition Conversion Kit, 12V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt positive ground only. (Part No: 1244AP12)$117.19

Electronic Ignition Conversion Kit - 6V Negative Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series) 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt negative ground only. (Part No: 1244AN6)$117.19

Electronic Ignition Conversion Kit - 6V Positive Ground - Electronic Ignition Conversion Kit. For 8N, 9N, 2N with FRONT Mount Distributor only. For tractors with 6-volt POSITIVE ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. (Part No: 1247P6)$132.38

Electronic Ignition Conversion Kit - 6V Positive Ground - Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system. For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 6-volt positive ground only. This electronic module replaces your points and condenser, also includes 40, 000 volt coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1247XTP6)$223.97

Electronic Ignition Conversion Kit, 6V Positive Ground - For 8N with side mount distributor only. This electronic module kit by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1244AP6)$117.19

Electronic Ignition Conversion Kit, 6V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1244AP6)$117.19

Electronic Ignition Replacement Module - This is a replacement module for the 1247XT electronic ignition kit. Does not have the magnetic sleeve for the rotor shaft. (Part No: 1247XT0)$76.58

Fuse Box Assembly - Eight amp, six fuse, fuse box. For tractor models (2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100 all 8 1970 and up without hazard warning indicators), (4330, 4340, 5000, 5100, 5340, 7000 all 8 1970 and up without cab or hazard warning indicator), (3110 5 1973 and up without cab or hazard warning indicator), (4140 5 1973 and up without hazard warning indicator) Replaces C9NN14N030B. (Part No: D2NN14N030A)$31.61

Fuse Holder - Mounts in 5 8 inch diameter hole. 2 spade connectors. Replaces: 22-226, 578489, 7020480, C7NN14411A, H340505, P41894 (Part No: 376852R91)$6.83

Fuse Holder - Mounts in 5 8 inch diameter hole. 2 spade connectors. Replaces: 22-226, 578489, 7020480, C7NN14411A, H340505, P41894 (Part No: 376852R91)$6.83

Generator - New LUCAS type Generator 12 volt, 22 amp, 1965 to 1975, less pulley. Comes with C5NF17B282B Tachometer Drive. 2000, 3000, 4000, 5000 Gas and Diesel. (620, 622 1967-1974). (7000 1971-1975 with 4-256). 1968 All 8000, 9000 series (up to 12 1969). INDUSTRIALS: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. LESS pulley. Pulley is available (see part number C5NF10196B). Replaces Lucas 22756, C4NN10002B, C9NN100001, 3109419R91, C5NG10000E, C7NN10000A, C4NN10002B. The Generator can also be used as a 12 volt generator on 1955-1965 4 cylinder tractors. NOTE, this is not the same style generator used on 1955-1964 tractors. It can be used to replace a 6 volt generator on 1955-1964 tractors and convert them to 12 volt positive ground system. (Part No: C7NN10000C)$78.11

Generator, 12 Volt - 11 amp. For tractor models Dexta, Super Dexta, Major, Power Major, Super Major. Replaces Ford New Holland:81806433, ADN10001, E27N10000, Fordson: E1ADN10001, Perkins: 2871182. (Part No: E1ADN1001)$124.13

Generator, 6 Volt - New Generator with Pulley. For 8N, 9N, 2N. Single terminal, 6 Volt, 2 brushes. (Part No: 8N10000)$164.91

Generator, 6 Volt without Pulley - This 6 Volt Generator was used on models 1800 Series, 2000 (4 cylinder 1962-1964), 2030, 2120, 2130, 4000 (4 cylinder 1962-1964), 4030, 4040, 4110TR, 4120, 4121, 4130, 4131, 4140, 501 SERIES, 600, 601 SERIES, 701 SERIES, 800, 801 SERIES, 900, 901, 6000. Uses FAG10505A regulator. Add $50.00 refundable core charge. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C4NN10002A)$337.69

Generator Armature - This Armature is used on 2 Brush, 3 Wire Generators 8N10001 on Ford 8N after serial number 263843. Also used on some Jubilees and some Ford cars and trucks. Replaces part number FAA10005BR, FAA10005B, 01A-10005, B5A-10005A, 8BA10005A, GFD3000. (Part No: FAA10005BR)$58.15

Generator Cut Out Assembly - Cut Out Assembly. For 9N, 2N. (Part No: B0NN10505A)$11.60

Generator Pulley - This Generator pulley with keyway measures 0.671 inch hole inside diameter. The outside diameter of the pulley itself measures 3.690 inch and the keyway is .157 inch. The belt groove width measures .625 inch. Replaces: 86575379, FAC10130B. (Part No: FAC10130B)$36.50

Generator, Pulley - 1 2 inch Keyed Hub, 3 1 2 inch outside diameter. Uses 1 2 inch belt. For tractor models 1965-1975 2000, 3000, 4000, 5000, gas and diesel, 1968 All 8000, 9000 series (up to 12 1969). INDUSTRIALS: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. Fits generators C7NN10000C and C5NF10000E. (Part No: C5NF10196B)$6.23

Glow Plug - A=3.37 inch, B=.87 inch, C=1.50 inch, D=M10 x 1.25 inch. For tractor models 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1510, 1530, 1620, 1630, 1710, 1715, 1720, 1725, 1900, 1910, 1925, 2110, 3415. (Part No: SBA185366060)$13.92

Glow Plug - For tractor models 1000, 1500, 1600, 1700. (Part No: SBA185366010)$32.42

Glow Plug - Fits Dexta, Super Dexta. (Part No: E197CQ9)$49.83

Glow Plug - Used in 144, 172 and 192 cubic inch 4 cylinder diesel engines, two of these glow plugs fit into 310659 intake manifold. Used from 1957-1964 these glow plugs replace Ford part numbers 86550509 and D8NN9A36AA. These engines were used on Ford Models 1801, 1811, 2000, 2030, 2031, 4000, 4030, 4040, 4130, 4140, 501, 541, 601, 621, 641, 651, 661, 671, 701, 741, 771, 801, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981 (Part No: D8NN9A36AA)$39.86

Ignition Kit With Rotor - 4 Cylinder - Ignition Kit contains: points, rotor, condensor. For 8N (LATE - with side mounted distributor), And 4 cylinder Ford Tractors from 1950 to 1964 . Also for TISCO 8N12127-WCR distributor. Replaces ATK7FAR, CPN12000A, C0NN12200A (Part No: ATK7FAR)$7.49

Ignition Switch - This Ignition Switch comes with two Keys. It replaces E8NN11N572AB, E8NN11N572AA, E7NN11N572AA (Part No: E8NN11N572AB)$29.46

Ignition Switch, Keyed - This 5 position, 7 terminal ignition switch comes with 2 key. Used on many tractor models (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10 1985. For TW5-TW35 to 5 1983-2 1990. 8530-8830 3 1990 and up. Starter and Heat Ignition Switch for tractors with cold start. Not for Shibaura built tractors. Replaces OEM 82849085, 81871583, 81838692, 83999543, 83902803, E7NN11N501AB, D3NN11N501A, D5NN11N501A, C5NN11N501A, E7NN11N501AC, 83959710, 83976890, E7NN11N501AA, E8NN11N501AA (Part No: E7NN11N501AB)$12.42

Ignition Switch, Keyed - This 5 position, 7 terminal ignition switch comes with 2 key. Used on many tractor models (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10 1985. For TW5-TW35 to 5 1983-2 1990. 8530-8830 3 1990 and up. Starter and Heat Ignition Switch for tractors with cold start. Not for Shibaura built tractors. Replaces OEM 82849085, 81871583, 81838692, 83999543, 83902803, E7NN11N501AB, D3NN11N501A, D5NN11N501A, C5NN11N501A, E7NN11N501AC, 83959710, 83976890, E7NN11N501AA, E8NN11N501AA (Part No: E7NN11N501AB)$12.42

Ignition Switch, Keyed - This 5 position, 7 terminal ignition switch comes with 2 key. Used on many tractor models (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10 1985. For TW5-TW35 to 5 1983-2 1990. 8530-8830 3 1990 and up. Starter and Heat Ignition Switch for tractors with cold start. Not for Shibaura built tractors. Replaces OEM 82849085, 81871583, 81838692, 83999543, 83902803, E7NN11N501AB, D3NN11N501A, D5NN11N501A, C5NN11N501A, E7NN11N501AC, 83959710, 83976890, E7NN11N501AA, E8NN11N501AA (Part No: E7NN11N501AB)$12.42

Ignition Switch, Keyed - This 5 position, 7 terminal ignition switch comes with 2 key. Used on many tractor models (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10 1985. For TW5-TW35 to 5 1983-2 1990. 8530-8830 3 1990 and up. Starter and Heat Ignition Switch for tractors with cold start. Not for Shibaura built tractors. Replaces OEM 82849085, 81871583, 81838692, 83999543, 83902803, E7NN11N501AB, D3NN11N501A, D5NN11N501A, C5NN11N501A, E7NN11N501AC, 83959710, 83976890, E7NN11N501AA, E8NN11N501AA (Part No: E7NN11N501AB)$12.42

Ignition Switch with Key - For tractor models (3830 Orchard), (4330 Vineyard), (4430 Orchard), TN65F, TN75F, TN90F. (Part No: 5146155)$32.85

Ignition Switch, with Keys - This ignition switch is 5 Terminal. For tractor models 1000, 1100, 1200, 1300, 1500, 1600, 1700, 1900, 1110, 1210, 1310, 1510, 1710, 1910, 2110. (Part No: SBA385200331)$51.75

Ignition Tune Up Kit, Complete, 3-Cylinder - Fits original Motorcraft Distributor. Kit includes, points, condenser, rotor, distributor cap, dust cover, custom fit spark plug wires, 3 Autolite AL405 spark plugs. For tractor models 2000, 3000, 4000, 2600, 3600, 4600, 2610, 3610, 4610. 3 cylinder models only. Replaces S.66642, Verify correct spark plug size and type (Part No: FD3CYLTK)$65.99

Key Switch - For all Fords 1939 through 1964 except Dexta and Fordson Major with 3 4 inch hole. Keyed Ignition Switch comes with 2 Keys. (Part No: 8N3679C)$7.46

Main Wiring Harness - This Main Wiring Harness includes headlight wiring. Does not include taillight wiring. This kit is designed for tractors that are not equipped with a fuel gauge. If you have a fuel gauge, please plan on reusing your gauge and sending unit wires. This harness is for gas with 6 volt generator systems and without fuel gauge (1953 - 1957). Replaces FDN14401B (Part No: FDN14401BOE)$152.36

Manifold Heater - Thermostart Intake Manifold Heater. Diesel cold weather starting aid. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 7000, 7600, 7610, 7700, 7710. Replaces C5NE9A436A, E1NN9A436AA, 603922, 87800843, 83933675, 81806046 (Part No: 3583543M2)$19.40

Point Set - Point Set. Used ONLY on OLDER Tisco replacement distributors (Through January 1987) for Late 8N Side Mount Distributors. (Part No: IGS2224LB)$6.75

Pulley Generator - Fits 8N (Keyway). Shaft hole is approximately 0.67 inch (approximately 11 16 inch). Pulley outside diameter approximately 3-5 8 inches, inside diameter approximately 2 5 16 inches X 5 8 inches wide. (Part No: 8N10130A)$7.05

Pulley, Generator - Pulley, Generator (threaded). For 8N, 9N, 2N. (Part No: 9N10130B)$26.21

Relay - Switch, Relay for Headlamp Wiring Harness. For tractors~ E series backhoe 3010S, 4010S, 8160, 8260, 8360, 8560, TM115, TM125, TM135, TM150. For 3010S, 4010S, 8160, 8260, 8360, 8560, TM115, TM125, TM135, TM150. (Part No: 82003697)$6.88

Resistor - For 8N, 9N, 2N, and 4 cylinder engines on 600 - 4000 tractors 1955-1964. Used in our 12 volt conversion kits. This resistor tests at .6 ohms under load through a distributor. (Part No: 8NE10306)$3.29

Resistor Assembly - For tractor models 8N to serial number 263844. Resistor measures .6 ohms + - .1 (Part No: A8NN12250A)$16.49

Resistor Assembly, Ignition Coil - For tractor models 9N, 2N. Resistor measures .5 ohms. (Part No: A8NN12250B)$16.29

Rubber Cover for Cold Start Switch - Models: Dexta, Super Dexta. (Part No: E331NE9)$17.96

Rubber Grommet - Rubber Grommet, starter switch wire {goes on lower left side of instrument panel}. Tractors: 8N, NAA {1948-1952}. (Part No: 11A14605)$3.78

Soleniod - Starter solenoid. For FW20, FW30, FW40, FW60 (Part No: 1119879)$32.93

Spark Plug - Replaces Autolite AL216, AL7, AL295 and Champion H8, H8J, H10, H11, H12, J8 spark plugs. For tractor models 1965 and up 2000, 3000, 4000, 1975 and up 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cubic inch gas engines. Price is for 1 plug. If you need 4, you need to order 4. Verify correct spark plug size and type. (Part No: AL295)$2.58

Spark Plug - Extended tip, 14mm thread, 3 4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)$3.12

Spark Plug - Extended tip, 14mm thread, 3 8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)$3.12

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: AL425)$2.85

Spark Plug - For 3 cylinder engines For 1965 and up: 2000, 3000, 4000. 1975 and up: 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cubic inch GAS. PRICE IS FOR 1. If you order one, you will receive one. If you need 3 or 4, you need to order 3 or 4. (Part No: AL405)$3.02

Spark Plug - For 8N, 9N, 2N, NAA, NAB, Jubilee, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL before 1965). SPARK PLUG. PRICE IS FOR 1. If you order one, you will receive one. If you need 3 or 4, you need to order 3 or 4. Replaces Autolite AL437, AL82, Bosch WR9FC and Champion H14Y and H18Y. (Part No: AL437)$1.85

Spark Plug - 3 Cylinder Engines. For 1965 and up: 2000, 3000, 4000. 1975 and up: 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cubic inch GAS. Price shown is for each, sold only in multiples of 4 items. (Part No: AL216)$2.58

Spark Plug Wire Bracket - For tractors: 8N {1950-1952}. (Part No: 8N12112B)$4.95

Spark Plug Wire Bracket - For tractor models 8N, 9N, 2N, (1939 to 1950). (Part No: 9N14564)$4.95

Spark Plug Wire Grommet - Distributor Spark Plug Wire Grommet. Holds all 4 plug wires together. Tractors: 8N (serial number 263843 and up 1950-1952). (Part No: 7RA12297)$3.95

Spark Plug Wire Rubber Grommet - This Grommet is used to hold the #3 and #4 plug wires at the #3 plug. Originally used on 8N after serial number 263843 It replaces original part number 7RA12271 (Part No: 7RA12271)$1.95

Spark Plug Wire Set - This is a assembled wire set for Ford 4 Cylinder Tractors, 1965 and later. Used on Ford 5000, 5500, 5550, 6600 (Part No: D7NN12287A)$42.42

Spark Plug Wire Set - Original style black cotton covered copper core wire with RAJAH terminals. One end is pre-assembled, crimp other end with a crimping tool. The Coil wire is 9 1 2 inches long The Plug wires are 32 inches long. Replaces AA1222R, AA1890R, AB3480R, AB3481R, AB830R, AD1415R, AD1454R, AD1544R (Part No: AA1222R)$33.30

Spark Plug Wire Set - 3 Cylinder, Custom - Premium quality leads have OEM style boots, are silicone with stainless steel core and are custom cut to length for 3-cylinder gas engines (1965 and newer) on: 2000, 2600, 3000, 3600, 3610, 4000, 4600. (Part No: DHPN12259A)$32.37

Spark Plug Wire Set, Custom - Premium Quality Wire Set for 8N with Side Mount Distributor. Zinc-coated plug terminals, modern low resistance core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 specifications. Made in the USA. (Part No: 8N12259)$17.25

Spark Plug Wire Set, Custom, 4 Cyl. - For tractor models before 1965, 4 Cylinder, 90 degree boot, for 134 and 172 Gas Engines. Boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259CUSTOM)$13.86

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. (Part No: CPN12259)$13.86

Starter - Starter, less drive, special Delco option 12 volt, clockwise rotation. DOES NOT LOOK LIKE ORIGINAL. For Jubilee, 2000, 4000, 501, 600, 700, 800, 900, NAA. (Part No: C3NF11002RXLD)$103.28

Starter - This starter with solenoid is 12 volt, 9 tooth, 1.70KW for models 1320, 1520, 1530, 1620, 1630, 1715, 1720, 1725, 1925, TC27D. Replaces SBA185086191, SBA185086290, SBA185086291, SBA185086500, SBA185086550, SBA185086551 (Part No: SBA185086551)$83.11

Starter - New Starter with Drive for Gas Engine 1965 and later, on: 2000, 2030, 3000, 4000, 4110, 2600, 3600, 4600, 2610, 3610, 4610, 230A, 231, 234, 334, 335, 340, 340A, 3400, 3500, 420, 4400, 4500, 445, 530A, 531, 535, 540A, 545, 550, 555. Replaces S-2014, SFD0089, C5NF-11001-B, C5NF11001B, C7NF-11001-B, C7NF11001B, D0NF-11001-A, D0NF11001A, D1NN-11001-A, D1NN11001A, D7NN-11001-A, D7NN11001ARXL, HD7NN11001AR, SA-640, SA640, SG-0060R, S4531, 1100-0112, 2-1813-FD, 3130, 3139, 3139N, 41-3139, 410-14005R, 44-4232, 62006, 72-3139, 91-02-5799, 99000 (Part No: D7NN11001A)$89.61

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! (Part No: STARTER)$0.00

Starter - Like original for Dexta, Super Dexta. Replaces Lucas 26071F (Part No: 957E11000)$303.60

Starter - With single contact solenoid, 12 volt, 10 tooth, clockwise rotation. For tractor models (8530 1990-93 with 6-401 dsl), (8600 1972-76 with 6-401 dsl), (8700 1977-79 with 6-401 dsl), (8730 1990-93 with 6-401 dsl), (8830 1990-93 with 6-401 dsl), (9000 1970-72 with 6-401 dsl), (9030 1990-98 4-268 dsl), (9600 1972-1976 with 6-401 dsl), (9700 1977-79 with 6-401 dsl), (420 1975-78 with 3-175 dsl), (455 1987-88 with 3 cylinder dsl), (455C 1989-92 with 3-201 dsl), (455D 1992-97 with 3-201 dsl), (555 1978-84 with 3 cylinder dsl), (555A 1984-85 with 3 cylinder dsl), (555B 1985-88 with 3 cylinder dsl), (555C 1989-91 with 4-256 dsl), (650 1975-77 with 4-256 dsl), (655A 1985-88 with 4-256 dsl), (655C 1989-91 with 4-256 dsl), (750 1975-79 with 4 cylinder dsl), (755 1979-84 with 4 cylinder dsl), (755A 1984-86 with 4 cylinder dsl), (5500 1967-73 dsl), (6500, 7500 1973-76), (A62 1974-1984 with 4-256 dsl), (A64, A66 1974-1984 with 6-401). Replaces 26395, 26211, 26338A, 26339A. (Part No: SLU0002)$157.87

Starter - With single contact solenoid, 12 volt, 10 tooth, clockwise rotation. For tractor models (231 1975-81 with 3-158 dsl), (233 1975-77 with 3-158 dsl), (250C, 260C 1990-94 with 3 cyl dsl), (333 1975-77 with 3-175 dsl), (335 1975-78 with 3-175 dsl), (340 1979-81 with 3-175 dsl), (340A, 340B 1981-84 with 3-175 dsl), (345C 1989-92 with 3 cyl dsl), (345D 1992-97 3 cyl dsl), (445 1979-83 3-183 dsl), (445A 1984-88 3-183 dsl), (445C 1989-92 with 3-183 dsl), (445D 1992-98 with 3-183 dsl), (515, 531 1975-81 with 3-201 dsl), (535 1975-77 with 3-201 dsl), (540A 1981-84 with 3-201 dsl), (540B 1984-88 with 3-201 dsl), (545 1979-83 3 cyl dsl), (545A 1984-88 with 3 cyl dsl), (545C 1989-92 with 3 cyl dsl), (545D 1992-98 with 3 cyl dsl), (550 1975-78 with 3 cyl dsl), (620, 622 1967-74 gas and dsl). Replaces 26395, 26211, 26339A. (Part No: SLU0002)$157.87

Starter - Replaces Bosch, Iskra and Marelli units. Lucas 12v, 10 tooth drive. For tractor models (5610s 1993-96 with 4-268 diesel), (5640 1992-97 with 4-268 diesel), (5640SL, 5640SLE 1994-97 with 4-268 diesel), (6640, 7740 1992-97 with 4-304 diesel), (6640SL, 6640SLE, 7740SL, 7740SLE 1994-97 with 4-304 diesel), (7840 1992-97 with 6-401 diesel), (7840SL, 7840SLE 1994-97 with 6-401 diesel), (8240, 8340 1992-97 with 6-456 diesel), (8240SL, 8240SLE, 8340SL, 8340SLE 1994-97 with 6-456 diesel), (555C 1992 with 3 cyl diesel), (555D 1992-97 with 4-256 diesel), (555E 1996-98 with 4-256 diesel), (575D 1992-97 4-256 diesel), (575E 1996-98 with 4-304 diesel), (655C 1992 with 4-268 diesel), (655D 1992-97 with 4-268 diesel), (655E 1996-97 with 4-304 diesel), (675D 1992-97 with 4-268 diesel), (675E 1996-98 with 4-304 diesel). Replaces 9007044014, 1369015, 1369023, 81868126, 82005342, 82005343, 82007917, 82012413, 82013922, 8203923, 86513093, 86628964, 87755550. (Part No: 82005342)$194.76

Starter - 12 volt, 11 tooth, clockwise rotation. For model 1156 1988-92 with Cummins diesel. Replaces 1990468. (Part No: SDR0010)$240.03

Starter - 12 volt, 11 tooth, Clockwise rotation. For tractor models (1920 1988-98 with 4-122 Shibaura diesel), (3415 1993-98 with 4-135 Shibaura diesel). Replaces 228000-2970, SBA185086530, SBA185086520, SBA185086750 (Part No: SND0259)$92.45

Starter - With single contact solenoid, 12 volt, 10 tooth, clockwise rotation. For tractor models (2810 1983-90 with 3-158 dsl), (2910 1983-89 with 3-175 dsl), (3230 1990-94 with 3-192 dsl), (3430 1990-98 with 3-192 dsl), (3910 1983-89 with 3-192 dsl), (3930 1990-99 with 3-192 dsl), (4130 1990-91 with 3-201 dsl), (5030 1992-98 with 4-256 dsl), (5610, 6610 1982-93 with 4-268 dsl), (7610 1982-92 with 4-304 dsl), (7710 1982-90 with 4-268 dsl), (7810 1980-90 with 6-401 dsl), (8210 1985-91 with 6-401 dsl), (8630 1990-93 with 6-401 dsl), (8730, 8830 1990-93 with 6-401 dsl), (9030 1990-97 with 4-268 dsl). Replaces 26395. (Part No: SLU0002)$157.87

Starter - 12 volt, 10 tooth, clockwise rotation. For tractor models (5030 1992-98 with 4-256 dsl), (5640 1991-98 with 4-268 dsl), (6530HC 1992-97 with 4-268 dsl), (6640 1991-98 with 4-304 dsl), (7740 1991-98 with 4-304 dsl), (7840 1991-96 with 6-401 dsl), (8240, 8340 1992-97 with 6-456 dsl). Replaces 1369023. (Part No: 82005342)$194.76

Starter - 12 volt, 11 tooth, clockwise rotation. For tractor models 1920, (2120 8 1996-2 1999), (3415 7 1993 and up), L465, L565, LS140, LS150, LS170, (LX465 engine serial number 46640 and up 1994-1999 with 843 New Holland engine), (LX485 engine serial number 46640 and up 1995-1999 with 843H New Holland engine), (LX565 engine serial number 57422 and up 1994-1999 with 844 New Holland engine), (LX665 engine serial number 57422 and up 1994-1999 with 844T New Holland engine), TC35, TC35D, TC35DA, TC40, TC40D, TC40DA, TC45, TC45D, TC45DA. (Part No: SBA185086530)$92.39

Starter - Like original for tractor models Major, Power Major, Super Major. Replaces OEM # DDN11000D (Part No: D0N11000D)$267.72

Starter - This new starter replaces OEM part numbers E7ADDN11000D, TS-4003, S4561, 26072, 26172. For model Major with Diesel Engine. Verify OEM Part Number. (Part No: E1ADDN11000C)$447.64

Starter - For 4230, 4430, 4835, 5635, 6635, 7635, TL100, TL70, TL80, TL90, TN65F, TN70F, TN75F, TN80F, TN90F, TN95f. Also Replaces 4755109, 4807375, 504059251, 82980757, 99449113. (Part No: 500338952)$202.17

Starter - For tractor models 3010S, 3830, 4010S, 4030, 5010S, TN55D, TN55S, TN55, TN65D, TN65S, TN65V, TN65, TN70D, TN70S, TN70, TN75D, TN75S, TN75V, TN75. Replaces 4728682, 4807373, 2000318, 154011052, 02022501, 04807373, 4172113, 4169096, 4710224, 87376491, 500338953, 2022501, 4766745, 4745929, 4682998, 84224935, 5801441816, 88305001, 88205001, 88205005, 99449112, 26290, LRS00850, 26390 (Part No: 500338953)$124.13

Starter, 12V - Replacement starter for Dexta and Super Dexta. This starter is new and does NOT look like the original. This starter mounts differently and you must rewire. A push button type starter switch is available for the wiring modification as part number 189158M91 or R7994. Replaces K262746, K957340, 42186, JST1310. (Part No: S.60360)$157.78

Starter, 12 Volt - 9 tooth, clockwise rotation. For tractor models (1100, 1110 diesel), 1200, 1300. Replaces S114218. (Part No: SBA185086111)$137.93

Starter, 12 Volt - Used on Dexta and Super Dexta with 4 cylinder with Standard Gas Engines (not Continental). Also replaces 25038, 1903125M91, S2532, 25038D. 12 volt. The Dexta and Super Dexta with Standard Gas engines are very uncommon in the US. (Part No: 829803M91)$193.20

Starter, 6 and 12 Volt, With Drive - New Starter for 8N, 9N, 2N. 12 Volt. Complete starter includes starter drive. This new design performs great for 6 or 12 volts due to better internal parts than the original. (Part No: 8N1100R)$113.16

Starter, 6 Volt, Less Drive - Starter, less drive. For 8N, 9N, 2N, with 6 volt systems. Restoration quality. (Part No: 8N11001)$102.58

Starter Boot - Rubber cover, starter control wire terminal {goes on wire to solenoid}. For tractors: 8N, Jubilee, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 8N11115)$7.50

Starter Boot - Rubber cover, starter switch terminal cover. Tractors {1948-1958}. (Part No: 8N11113)$3.95

Starter Boot - This Starter Rubber Boot is for tractor models Major, Power Major, Super Major, Dexta, Super Dexta all with original starter. (Part No: E1ADDN11535)$24.63

Starter Conversion Kit - This Starter Conversion Kit including key switch and instructions for converting Fordson Major, Power Major and Super Major from mechanical push rod activated starter to key activated starter. (Part No: B1391)$315.74

Starter Copper Strap, Solenoid to Starter - Fits 8N. (Part No: 8N11518)$4.85

Starter, Diesel Engines - With single contact solenoid, 12 volt, 10 tooth, CW rotation. For tractor models TW10, TW20, TW25, TW30, TW35 1979-1983 with 6-401, 2000, 3000 1965-1975, 2310 1982-1985, 3-158, 2610 1982-85, W 3-175, 2810 1983-89 with 3-158, 2910 1983-89 with 3-175, 3000 1965-68 with 3-175, 3230 1990-95 with 3-192, 3430 1990-98 with 3-192, 3610 1982-83 with 3-192, 3910 1983-90 with 3-192, 3930 1990-96 with 3-201, 4000 1965-72 with 3-192 or 3-201, 4100 1978-81 with 3-183, 4110 1977-83 with 3-201, 4630 1989-96 with 3-201, 1990-99 with 3-192 diesel, 5000 1965-76 with 4-256, 5030 1992-96 with 4-256, 5600 1975-81 with 4-256, 5610 1981992 with 4-256, 5900 1985-93 with 4-256, 6600 1975-81 with 4-256 diesel, 6610 1982-92 with 4-268, 6700 1975-81 with 4-256, 6710 1982-85 with 4-256, 7000, 7100, 7200 1971-75 with 4-256), 7400 1975-76 with 4-256, 7600, 7700 1975-81 with 4-256, 7710 1982-91 with 4-268, 7810 1978-91 with 6-401, 8000 1968-87 with 6-401, 8210 1978-91 with 6-401. Replaces 26395, 26211, 26339A, SLU003. (Part No: SLU0002)$157.87

Starter, Diesel, Gear Reduction - Gear Reduction Starters offer higher torque than a direct drive starter. This can be useful for diesel engines. This is a gear reduction replacement for our part SLU0002. Replaces 81833782, 81859494, C7NN11000C, D4NN11000A, D0NN11000A, D2NN11000A, 81859398, 81826488, D7NN11000A, D6NN11000A, D8NN11000CD, D8NN11000CB, D8NN11000CA, E2NN11000AA, D2NN11000B, D5NN11001A, D4NN11000B, D7NN11000B, D8NN11000DA29Z, D8NN11000CE, E3NN11000AA, D9NN11000AA, K262761, K308650, LRS212, 26395, 26211, 26339A (Part No: 80855520)$166.98

Starter Drive - Drive assembly. For tractor models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: C1AF11350A)$24.65

Starter Drive - Starter Drive Assembly. For 2000, 3000, 4000, 5000. (Part No: D2NN11350B)$27.89

Starter Drive - Starter Drive for TISCO 5 inch diameter starter replacement for D8NN11000CE. Does not fit Ford original D8NN11000CE. Will service original 4-1 2 inch diameter Ford starter D8NN11000DA. For 2000, 230A, 231, 233, 234, 3000, 333, 334, 335, 4000, 530A. (Part No: D2NN11350C)$18.43

Starter Drive - Starter Drive for original Ford and Tisco 5 inch diameter starter D8NN11000CE. For tractor models 2000, 230A, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 334, 335, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530A, 531, 532, 540, 545, 550, 555, 5600, 5610, 5700, 5900, 655, 6600, 6610, 6700, 6710. (Part No: E4NN11350AA)$53.24

Starter Drive - New improved design Starter Drive, for 8N, 9N, 2N (1939 to 1952). (Part No: 52-11350C)$20.01

Starter Drive - Starter Drive for original Ford and Tisco 5 inch diameter starter D8NN11000CE. For tractor models 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8530, 8630, 8700, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. (Part No: E4NN11350AA)$14.25

Starter, Hitachi - 9 teeth, clockwise rotation, 12 Volt. For models 1910, 2110. Replaces S13-32A, SHI0146, 17299, SBA185086141, SBA18508-6350, S13-32, LRS02237 (Part No: SBA185086350)$223.21

Starter New - NEW Starter assembly. 2 Bolt Mount. For industrials: L454, L455, L553, L555 {1981 to 11-1993}. For L454, L455, L553, L555 (Part No: 503470)$156.52

Starter New - Starter Assembly. Replaces F0NN11000CA and 9821291, 3.1 kw. For 4830, 5030, 555C, 555D, 555E, 5610S, 5640, 575D, 575E, 655C, 655D, 655E, 6610S, 6640, 675D, 675E, 7610S, 7840, 8160, 8240, 8260, 8340, 8360, 8560, L865, L885, LX865, LX885, TS100, TS110, TS90. (Part No: 82005342)$194.76

Starter, New - 12 volt, clockwise rotation, 10 teeth. For tractor models 1100 with perkins diesel, 1116, 1495 with perkins diesel, 1496. (Part No: 795152)$150.42

Starter, New - 12 volt, clockwise rotation, 11 teeth. For model 2120 1987 to July 1996. M2T54085 (Part No: SBA185086410)$147.07

Starter, New - 12 volt, clockwise rotation, 12 teeth, 3 bolt mount. For tractor models L553, L555 with perkins engines. (Part No: 9800888)$262.53

Starter, New - 12 volt, clockwise rotation, 10 teeth. For tractor models L779 diesel prior to 1983, L783 and L785 both with perkins engines. (Part No: 9800887)$161.23

Starter, New - 12 volt, clockwise rotation 11 teeth. For tractor models 8360, 846, 8560, 936, 946V, 956, 976V, 1156 with cummins. Replaces, V102746, V90562. (Part No: 9706425)$436.20

Starter, New - Replaces;685977, F7SZ11002AA. For tractor models 1112 gas, 1114 gas, L784. (Part No: E9SZ11002B)$101.56

Starter, New - For model L250. (Part No: 507673)$118.86

Starter, New - For model L600. (Part No: 507461)$132.98

Starter, New - 12 volt, 9 teeth, clockwise rotation. For tractor models 1000, 1500, 1600, 1700. Replaces S12-62, SBA185086051, SBA185086052, SBA185086050 (Part No: SBA185086052)$266.01

Starter, New - For tractor models 1320, 1520, 1620, 1710, 1720. (Part No: SBA185086291)$257.92

Starter, New - For tractor models (4330 Vineyard), (4430 Orchard), (4835, 5635, 6635 up to serial number C3868). (Part No: 4807375)$194.99

Starter, New - This Hitachi type starter has 9 teeth, is 12 volts with a counter-clockwise rotation. Crosses to part numbers SBA185086321 SW07201, 18508-6321. For models 1100, 1110, 1200, 1210, 1300, 1310, 1510. (Part No: SBA185086320)$142.07

Starter Post Kit - This kit replaces the wire post on Ford starters, 1939 to 1964. Replaces C7NF11102A, 1811107B, 86512984, 6810044. (Part No: A9AZ11102B)$6.98

Starter Repair Kit - For 8N, 9N, 2N. Starter Repair Kit contains all parts necessary for repair of starter part number 8N11001. (Part No: SRK401)$13.62

Starter Repair Kit - For OEM Starter FAC-1102N on NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 6000, Major, Super Major, Dexta, all 4 cylinder gas or diesel 1953-1964. (Part No: SRK403)$17.82

Starter Safety Switch - Safety Starter Switch. For 2000, 2100, 3000, 3100, 3400, 3500, 3550, 4000, 420, 445, 4500, 5000, 532, 535, 545. Replaces C7NN7A247B, 81825189, 314120, 237296, 81812983, C5NN7A247B (Part No: C7NN7A247B)$10.97

Starter Safety Switch - For tractor models 2000, 3000, 4000, 5000, 7000 all with 8 speed, dual range, 10-1966 and up. For 2100, 3100, 3400, 3500, 3550, 4400, 4500, 10-1966 and up with Manual Reversing Transmission. Ind: 231, 233, 335, 2600, 3600 all with 6 speed 1975 and up. Ind: 231, 233, 333, 335, 420, 515, 531, 532, 535, 2600, 3600, 340, 445, 540, 545, 4100, 4600, 4600SU all 8 speed 1975 and up. For 5600, 6600, 7600 with 7 and 8 speed 1975 and up. For 5700, 6700, 7700 with 7 and 8 speed 8-1976 and up. For 335, 2600, 3600, 340, 420, 515, 535, 445, 540, 545 all with Manual Reversing Transmission 1975 and up. For 5700, 6700, 7700, all clutch controls 8-1976 and up. For 8000, 9000, TW10, all clutch controls 1968 and up. For TW20, TW30, both clutch controls 1979 and up. Replaces C7NN7A247A, 81817901 (Part No: C7NN7A247A)$14.69

Starter Safety Wire Assembly - For tractor models (2000, 3000, 4000 with 6 or 8 speed trasnmissions 10 1966 to 1975), 2600, 3600, 4600, 2610, 2810, 2910, 3610, 3910, 4610, 230A, 231, 250C, 260C, 335, 340, 340A, 340B, 345D, 420, 445, 445A, 445C, 445D, 530A, 531, 540, 540A. Replaces D4NN7A488B, D4NN7A488BB, E4NN7A488BB, E4NN7A488CA, 81827298, 83948129, 83963950 (Part No: D4NN7A488BB)$19.88

Starter Solenoid - Fits Fordson Major, Power Major, Super Major, Dexta, Super Dexta. (Part No: E1ADDN11450C)$24.12

Starter Solenoid - Hitachi Style, 12 Volt, 3 Terminal Solenoid. It is used on many Ford New Holland Tractors and Industrial models using Hitachi Starter numbers: S13-61, S13-61A, S12-62, S13-32, S13-32A, S13-73, S13-74, S1361, S1361A, S1262, S1332, S1332A, S1373, S1374. Replaces Ford New Holland part numbers E2NN11390AA, SBA185816070, SBA185816200, SBA185846183. Replaces Hitachi Part Numbers 2114-67006, 2130-17004, 2130-8700, 2114-37003. Replaces Isuzu Part Numbers 8-94216-6330, 8-94218-7720. (Part No: E2NN11390AA)$12.41

Starter Solenoid - Hitachi Style, 12 Volt, 3 Terminal Solenoid. It is used on many Ford New Holland Tractors and Industrial models using Hitachi Starter numbers: S13-61, S13-61A, S12-62, S13-32, S13-32A, S13-73, S13-74, S1361, S1361A, S1262, S1332, S1332A, S1373, S1374. Replaces Ford New Holland part numbers E2NN11390AA, SBA185816070, SBA185816200, SBA185846183. Replaces Hitachi Part Numbers 2114-67006, 2130-17004, 2130-8700, 2114-37003. Replaces Isuzu Part Numbers 8-94216-6330, 8-94218-7720. (Part No: E2NN11390AA)$12.41

Starter Solenoid - This 12 volt, 4 post Starter Solenoid is for the following 1964 and earlier models: 1800, 1801, 1811, 1841, 1871, 1881, 2000, 2030, 2120, 4000, 4030, 4040, 4140, 4120, 4130, 4140, 501, 6000, 601, 701, 801. Does NOT ground through base. (Part No: 311006)$6.38

Starter Solenoid - For 2000, 3000, 4000, 5000, 3900, 3910, 4100, 4600, 5600, 6600, 7700 With 5 inch starter (Part No: D7NN11390B)$15.99

Starter Solenoid - For Starter D8NN11000DA on 2000 and 3000 diesels 1973-1975, 5000 gas 12 1972-1975, (2600, 3600, 231, 233, 333, 335, diesel 1975-1981), 2610 (1981-1983), 2810 (1984-1990), 2910 (1983-1990), 3310 (1965-1974), 4000 series (1965-1974), 4100 (1975-1981), 4110 (1981-1990), 4600 (1975-1981), 4610 (1981-1990), 5340 (1968-1974) 6600 gas 1975-1981, 7000 series (1971-1974). NOT FOR D8NN11000CE 5 inch starter. (Part No: D7NN11390A)$27.74

Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Part No: DR1467)$12.15

Starter Solenoid, 12 Volt - This Starter Solenoid (Relay Assembly)will work for 6 or 12 volt applications. It has three posts and a saddle mount. For 8N, 1948-1952. (Part No: 8N11450-12V)$10.95

Starter Solenoid, 12-Volt - Relay assembly, 12 volt, 4 terminal. For most 12 volt GAS models 1955 and later including: 1100, 2000, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 3500, 360, 3610, 3900, 3910, 4110, 4140, 420, 4330, 4340, 4400, 4410, 445, 450, 4500, 4600, 4610, 5000, 5110, 515, 530, 531, 5340, 535, 540, 545, 550, 5600, 5610, 5700, 5900, 6410, 655, 6600, 6610, 6710, 6810, 7000, 7410, 7600, 7700, 7710. Replaces 311007FR. I terminal DOES ground through the base. (Part No: D2AF11450AA)$12.21

Starter Solenoid, 6 Volt - This is a 4 post, 6 volt starter solenoid relay assembly. It has a flat mount. It replaces part numbers 311007FRGV, A604595, 311007, SW217, 311007FR. (Part No: 311007)$13.65

Starter Solenoid, 6 Volt - This Starter Solenoid (Relay Assembly) for 6 volt Systems. Will also work on 12 volt systems, for a more robust solenoid, use 8N114500-12V It has three posts and a saddle mount. For 8N, 1948-1952. (Part No: 8N11450)$7.13

Starter Solenoid Assembly - New Solenoid Assembly for Ford original D8NN11000CE Starter 5 inch diameter. Does not fit TISCO D8NN11000CE. Fits 5000 Gas and Diesel 2000 and 4000 Diesel. (Part No: E4NN11390AC)$32.22

Starter Solenoid Assembly - This 6 or 12 Volt Starter Relay is for NAA, Jubilee, 600, 700, 800, 900, all 1953-1957. Flat mount, 3 post. Replaces: NCA11450A, DR1494, U925, U928, SW1, SW219 (Part No: NCA11450A)$15.17

Starter Switch - For 9N serial number <12499 1939 to 1940. Starter Switch (push type). Replaces: 1996487 Delco, 405C Delco. (Not the same as Triangular 9N11450B 1940 to 1947) (TIS DR405C). (Part No: 9N11450A)$7.71

Starter Switch - With mounting gasket. Fits 8N (1948-1952), all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. Replaces 8N11550. (Part No: 8N11500WG)$10.74

STARTER SWITCH - Ignition Switch Assembly, Starter Heater. Tractors: 5640, 6640, 7740, 7840, 8160, 8240, 8340, 8360, 8560, TM115, TM125, TM135, TM150, TM165, TS90, TS100, TS110. (Part No: F0NN11N501AA)$240.06

Starter Switch, Restoration Quality - Fits 9N, 2N with Safety Start. 2-3 4 inches center to center. (Part No: 9N11450B)$17.99

Starter with Drive - This 3 Bolt Starter performs in 6 volt and 12 volt applications. Comes with drive, clockwise rotation. For 134, 144, 172, 192 4 cylinder gas or diesel, 6 or 12 volt systems 1952 through 1964. Replaces: C3NF11001B, C3NF11002D, C3NF11002E. (Part No: C3NF11002D)$128.24

Switch, Push Button - Fits 2000, 4000, 601, 701, 801, 901. All 4 Cylinder, Pre 1965 with select-o-speed transmission or diesel engine. Replaces 312133. (Part No: 189158M91)$8.51

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5 8 inch number 32 thread. It is 21 32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Part No: R7994)$11.25

Terminal Block - For tractor models 8N 1950-1952, NAA, (2000, 4000 up to 1964), 600, 800. (Part No: 8NNN14448A)$7.65

Tune Kit - This Tune Kit is for tractor models 9N, 9N, 2N, and Early 8N, all with Front Mount Distributor. Tune Up Kit, Autolite. Includes: point set, condenser, rotor and (4) 437 Autolite Spark Plugs and gaskets. Verify correct spark plug size and type (Part No: 309786)$17.34

Tune Kit - This Tune Kit include Autolite spark plugs (AL 405), points, condenser, and rotor (4 cylinder). For tractor models 5000, 6600, 5500, 5550. Verify correct spark plug size and type (Part No: S.66450)$23.48

Tune Kit, Basic - This Basic Tune Kit has points, condenser and rotor for Front Mount Distributor. For 9N, 2N and Early 8N. (Part No: ATK6FFR)$9.24

Tune Kit, Basic - This Basic Tune Kit contains points, condenser, rotor. For 3 cylinder gas tractor models: 2000, 3000, 4000 from 1965 and up, 2600, 3600, 4100, 4600 from 1975 and up. (Part No: ATK6FXR)$9.80

Tune Kit, Basic - This Basic Ignition Tune Kit is for 4 cylinder gas tractor models NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). Tune up kit, Autolite (AL437). Kit contains: D8NN12171AA point set, FET12300A condenser, CONN12200A rotor and spark plugs. (Part No: 309787)$12.66

Tune Kit, Basic - This Basic Ignition Tune Kit is for 3 cylinder gas tractor models 1965 and later. 2000, 3000, 4000. 1975 and up: 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cubic inch GAS. Tune up kit, contains point set, condenser, rotor and (3) Autolite AL405 spark plugs. Verify correct spark plug size and type. (Part No: 309788)$21.62

Voltage Instrument Stabilizer - For (2000, 3000, 4000, 5000, 7000, 1965-1975), (2600, 3600, 4100, 4600, 5600, 6600, 7600, 1976 to 1981). Voltage Stabilizer for instrument cluster replaces C5NN10N507A. (Part No: C7NN10N507A)$14.66

Voltage Regulator - For tractor models Dexta 1957-5 1962, Major and Power Major Both 1952-2 1960. 4 conductors. Can Replace OEM number 81718301. (Part No: E1ADDN10505)$44.85

Voltage Regulator - Used on Motorola equipped units: 230A, 2310, 234, 250C, 2610, 2810, 2910, 334, 335, 340, 340A, 340B, 345C Indust Const, 345D Indust Const, 3610, 3910, 4110, 445 Indust Const, 445C Indust Const, 445D Indust Const, 450 Indust Const, 4610, 5110, 530A, 530B, 540A Indust Const, 540B Indust Const, 545A Indust Const, 545C Indust Const, 545D Indust Const, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8210, 8530, 8630, 8730, 8830, TW15, TW25, TW35, TW5 12v, round terminal plug with four male connectors. (Part No: E4NN10316BA)$74.94

Voltage Regulator - For 8N - For Early Models with Front Mount Distributor, with generator. (Part No: 8N10505B)$20.01

Voltage Regulator - For 2000, 3000, 4000, 5000, 7000. Control box (Voltage Regulator) - 11 Amp. Replaces C7NN10505A, 81818814, 82847720, C7NN10505D. (Part No: C7NN10505D)$47.56

Voltage Regulator - Voltage regulator, 12-volt. For tractor models NAA, Jubilee. (Part No: 8NE10307)$46.77

Voltage Regulator - 12 Volt - This is a 12 Volt, 22 Amp Voltage Regulator used on Ford Tractors 1965 and up with C5NF10000E Lucas Generator. It replaces 105E10505C, 3004E10505A, 622E10505A, 71AB10505BA, 82847719, C5NF10505B, C7NN10505B, C7NN10505C, C7NN10505E, D0NN10505A, 81824174, 83974894, D0NN10505B, VPF3006. (Part No: D0NN10505A)$17.78

Voltage Regulator, 12 Volt - Voltage Regulators for Motorola Style Alternator, numbers D5NN10300E, D5NN10300D, D6NN10300A, D7NN10300B or D5NN10300D used on models 231, 2310, 233, 234, 2600, 2610, 340, 340A, 3600, 3900, 4100, 420, 445, 4600, 515, 531, 532, 535, 540, 540A, 545, 550, 555, 555A, 555B, 5600, 5700, 650, 655A, 6600, 6700, 755, 755A, 755B, 7700, 8700, 9700. All with diesel engines and an alternator. Replaces D1NN10316A, D1NN10316B, 21A656, D7NN10316B, D3NN10316A. (Part No: D1NN10316A)$38.61

Voltage Regulator, 12 Volt - Voltage Regulators for Motorola Style Alternator, numbers D5NN10300E, D5NN10300D, D6NN10300A, D7NN10300B or D5NN10300D used on models (2810, 2910, 334, 335 Hiway 3610, 3910, 4110, 5110, 530A, 5610, 5900, 6610, 6710, 6810, 7410, 7710 diesel with alternator built between 1 1 1981-8 31 1986), (335 diesel with alternator 10 1975-9 1978), (340B, 445A, 540B, 545A diesel with alternator 6 1985-8 31 1986), (4610 diesel with alternator 1 1 1986-8 31 1986), (6500, 7500 1974-10 1975), (7000, 8000, 9000 diesel with alternator 1958-1964), (8000, 8200, 8400, 8600, 9000, 9200, 9600 diesel with alternator 11 1 1971-12 31 1978). Replaces D1NN10316A, D1NN10316B, 21A656, D7NN10316B, D3NN10316A (Part No: D1NN10316A)$38.61

Voltage Regulator, 12 Volt - Voltage Regulator Fits 1000, 1310, 1500, 1510, 1600, 1700, 1710, 1900, 1910, 2110. Replaces SBA185516030, 1601-8601-00, 70579, 124550-77710, TL1A86, TL1Z86. This is a solid state replacement for the original mechanical regulator. The mechanical regulator is no longer available. (Part No: SBA185516030)$14.72

Voltage Regulator, 12 Volt 22A Generator - For tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Jubilee. All 1953 to 1964. (Part No: C0NF10505A)$36.75

Voltage Regulator 6 Volt - This Voltage Regulator has 3 terminals and is for an 8N with Side Distributor with generator. (Part No: 8N10505C)$18.47

Voltage Regulator, 6 Volt - This 6 volt positive ground Regulator has 3 terminals (armature, field, battery). It is designed for "B" type circuits and has 10 to 12 output amps. For 1953-1964 GAS engine tractors: NAA, 1800, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: FAG10505A)$18.47

Wiring Harness - Has woven fabric casing. For 2N (1943 to 1947) with single pole generator. Also for 9N with single pole generator. Ignition Wiring. Replaces 86618153, 2N14401 and 9N14401C. (Part No: 2N14401)$17.43

Wiring Harness - For Diesel Engines. One piece, front and rear. This is a complete harness for tractor. For tractors that uses alternator only. For tractor models 2600, 3600, 3900, 4100, 4600. Suitable for North America less Cab. Replaces part numbers D6NN14A103J, D6NN14A104L. Does not have cab AC wiring or cab firewall connector. (Part No: S.67792)$244.99

Wiring Harness - Built exactly like the original, this is a complete wiring harness kit is used on Ford 3-cylinder gas, 1965 and up with generator systems. Used on Ford 3000, 2100, 2110, 2120, 2150, 2300, 2310, 2000, 4000, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 4000SU, 4100, 4110, 4140, 4190, 4330, 4340. Replaces C5NN14A103AF, C5NN14A103AJ, C5NN14N104R, C5NN14N104T, C5NN14N105A, C9NN14A103B (Part No: C5NN14A103AFKIT)$479.99

Wiring Harness - Used on Ford New Holland models 6 92 and later 3230, 3430, 3930, 3930N, 4130, 4130N, 4630, 4630N, 4830, 4830N, 5030, this harness replaces OEM numbers F1NN14A103BC99M, 276433, 81875690, 82850451, F1NN14A103BD99M, 82002611. Note, for some applications, sockets need to be modified. Parts are included to do this. (Part No: 82002611)$637.19

Wiring Harness - Fits NAA & Jubilee (1953 to 1954). Ignition harness only. (Part No: FAF14401B)$8.19

Wiring Harness - For Ford tractor models 1955 to 1957, 6 volt. Engine harness, does not include wire to front or rear lights. (Part No: FDN14401B)$46.83

WIRING HARNESS - FRONT WIRING HARNESS. FORD TRACTOR MODELS: 5600, 6600, 7600, all with Lucas Generator. Replaces OEM part numbers C5NN14A103AE and C7NN14A103M. (Part No: C9NN14A103C)$55.82

Wiring Harness 12 Volt - For Late 8N. 12 Volt Wiring Harness for those tractors converted to 12 Volts. This is main engine wiring only. (Part No: 8NL10301)$21.56

Wiring Harness 12 Volt - Wiring Harness for 2N, early 8N, and 9N that has been converted to 12 Volt. Does not include light wiring. There are many different ways to wire a 12 volt conversion and this is the wiring harness provided in our 12 volt conversions set. It may be different than how your 12 volt conversion was done if not done with our kit. (Part No: 8NE10301)$21.56