Discount Tractor Parts and Manuals for Older and Antique Tractors

FREE SHIPPING on orders above $249.99! Details

(800) 853-2651

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Harry Ferguson Parts
Master Parts List [Show Pictures]

Clutch

Clutch disc - 5 1 2 inch new clutch disc, Spline DIAMETER: 0.9375 inch, spline COUNT : 10. Fits Cub Lo-Boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy, Cub 184. Verify size before ordering. (Part No: 154346)	$35.26

Clutch Disc - TORQUE AMPLIFIER Clutch Disc. This disc is a 7 inch disc with 14 splines. For tractor models Super M, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2544, 2656. (Part No: 113817)	$92.00

CLUTCH, PRESSURE PLATE - Pressure Plate (7 1 4 inch) Diaphram Type. For Case IH models 234, 244, 254, 235. (Part No: 130109)	$51.00

PTO Clutch Kit - Clutch disc kit for single or dual speed independent PTO using 5 discs and 8 plates. Tractors: Hydro 84, 385, 395, 464, 484, 485, 495, 574 serial number 100001 and up, 84, 585, 595, 674, 684, 684, 685, 695, 784, 885, 2400A serial number 100001, 2500A serial number 100001 and up. For 2400A, 2500A, 385, 395, 464, 484, 485, 495, 574, 584, 585, 595, 634, 674, 685, 695, 784, 884, 885, HYDRO 84. Kit includes, 5 DISCS (401716R2), 8 PLATES (66188C1), 1 O-RING (401723R1), 1 O-RING (401724R1), 6 SPRINGS (66182C1). (Part No: 124694)	$117.60

Cooling System

Fan Belt - This Fan Belt measures 35.00 inches length and 0.700 inch width, For, 130 GAS, 200 GAS, 230 GAS, C GAS with WATER PUMP, Super A GAS serial number 48000 to 48499, Super AV GAS serial number 48000 to 48499, Super C GAS serial number 100001 to 114645, Super C GAS serial number 114646 and up. B with water pump. Please verify measurements before ordering (Part No: 111155)	$14.26

Radiator - For tractor models Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 200 and 230. This radiator is for PRESSURIZED systems only. 2 inch upper and lower hose connections. The core is 16-1 8 inches high and 16 inches wide. NOT FOR EARLY TRACTORS THAT DID NOT HAVE A WATER PUMP. Replaces 356356R96, 358104R93 (Part No: 101710)	$393.00

Radiator - Height overall 21 1 2 inches, width overall 17 1 2 inches, depth overall 5 inches. Our new radiator is designed and built to precise dimensional specifications to ensure an exact fit. Each radiator has a stamped brass tank, undergoes a rigorous quality inspection, and is 100% leak tested. This radiator has 7 fins per inch and 4 rows of tubes. The Core 16" tall and the core size is 16.5" wide. This radiator fits multiple Case-IH Tractor models. (NOTE: replaces 3107749R91, 3044008R94, 3044008R95, 3107750R91, 845201R92, 845198R92, 3070812R91, 3070812R92) (Part No: 115600)	$350.00

Decals and Emblems

Decal Set - For McCormick WD6, 1939-1944. COMPLETE Decal Set. (Part No: MDWD6)	$59.64

Decal Set - For McCormick WD6, 1945-1952. COMPLETE Decal Set. (Part No: 101061)	$53.99

Decal Set - For 200, 230. COMPLETE 9 piece Decal Set. (Part No: 100948)	$38.26

Decal Set - For 240. COMPLETE 11 piece Decal Set. (Part No: 100949)	$38.26

Electrical System (Starters, Generators, Coils, Wiring, etc.)

12 Volt Conversion Kit - For M, Super M. Kit includes alternator with built-in regulator, Pulley, 12 volt resistor, wiring harness, brackets and instructions. Will not work if you have a magneto. THIS KIT USES A LARGER ALTERNATOR THAN THE IHCALTH KIT. IT WILL NOT FIT UNDER HOOD WITHOUT CUTTING HOOD. (Part No: 107099)	$130.90

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. (Part No: ALTERNATOR)	$0.00

Distributor Drive Housing - This is a new distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing, part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Part No: 178938)	$87.00

Distributor Drive Housing - This is a new distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Part No: 178938)	$87.00

Distributor with Electronic Ignition - New and complete distributor comes with a 32 tooth gear, and is FOR USE WITH 6 VOLT POSITIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. (Part No: 113311)	$525.00

Distributor with Electronic Ignition - 12V - New and complete distributor comes with a 32 tooth gear, and is FOR USE WITH 12 VOLT NEGATIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Note: This distributor has a maximum advance of 21 degrees. Some applications require an advance up to 40 degrees. Verify with your service manual this distributor will work for your application. (Part No: 113361)	$504.00

Spark Plug - Extended tip, 14mm thread, 3 4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: 179436)	$3.50

Spark Plug - Extended tip, 14mm thread, 3 8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: 179437)	$3.50

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: 182459)	$3.16

Starter - STARTER For 385, 395, 484, 485, 495, 584, 585, 595, 684, 685, 695, 784, 884, 885, 895, 995 Replaces Lucas 27508B (Part No: 104180)	$185.00

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! (Part No: STARTER)	$0.00

Starter - Delco Replaces OEM 1107543, 1107564, 1108657. TYPE: DR 20MT, 9 teeth, CCW rotation, volt KW: 12. NOTE :C-221 Gas LPG, LPG Engine (YR.59-58). Fits these models: 340 DSL(1962-63), 350 DSL(1956-58), 350 DSL(1957), 3514 DSL(1965-66), 3616 DSL(1965-66), 460 DSL(1958-59), 460 DSL(1962-64), 460 GAS, LPG, (1960-61), 460 GAS, LPG, (1960-64), 460 GAS with LPG, (1958-59), 460HC GAS, LPG, (1960-64), 504 DSL(1961-66), 560 GAS with LPG, (1958), 560 GAS with LPG, (1958-64), 560HC GAS with LPG, (1958-64), 606 DSL(1961-66), 606 GAS, LPG, (1961-64), 656 GAS, LPG, (1965-66), 660 GAS, LPG, (1960-61), 660 GAS with LPG(1958-59), T340 (1960-62), TD340 (1962-64), TD340 (1967), 560 GAS with LPG, (1959-64). Refundable $55.00 core charge will be added to your order. There is an additional shipping cost for this product: $20.00 (Part No: 203447)	$400.01

Wiring Harness - For A, B. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: 126782)	$199.99

Wiring Harness - For Super A with Distributor Ignition. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. Replaces OEM# 45640DB. (Part No: 126785)	$228.00

Wiring Harness - For C, Super C. All with generator cut-out (not with Voltage Regulator). COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: 126783)	$199.99

Wiring Harness - For H and HV with Regulator on generator. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. To Serial Number 340953. (Part No: 126812)	$285.00

Wiring Harness - For H and HV with Regulator Under Fuel Tank. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. From SN 340954 and up. (Part No: 126813)	$285.00

Wiring Harness - For Super H with Regulator Under Fuel Tank. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: 126789)	$295.00

Wiring Harness - For Super H with Regulator on Amp Box. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: 126784)	$297.80

Wiring Harness - For M with Regulator on Generator. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: 126814)	$280.00

Wiring Harness - For tractor models Super M with Regulator on Generator. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R3725)	$272.89

Wiring Harness - For model Super MD with Regulator on Steering Post Box. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: 180648)	$290.00

Wiring Harness, Complete - For M with Regulator on Steering Post Box. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: 126787)	$290.00

Engine Overhaul Kits

Basic Engine Overhaul Kit, Less Bearings - Basic Engine Kit, less bearings (C169 CID Gas 4-cylinder engine). For tractors with stepped head pistons with 1.109 original pin diameter. 0.875 inch piston pin diameter supplied. If your engine has 1.109 inch piston pins, you will been to order 158977 thick walled bushings. Thicker walled pin bushing are used to accommodate 0.875 pins supplied. Model 300 to serial number 48048. Models: 300. Kit contains sleeves and piston kit, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. NOTE: Does not include piston pin bushings 366883R92 for pin diameter 1.109 inch to 0.875 conversion. Order 158977 separately. (Part No: BEKH1167-LCB)	$600.00

Basic In-Frame Engine Kit - In Frame Engine Kit. For tractor models 300 and 350. (C169 and C175 CID Gas 4-cylinder engines). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. NOTE: if your piston pin diameter is 1.109 inch you need to order bushings part number 366883R92 if .875 inch order part number 364913R1. (Part No: 189586)	$480.00

Engine Overhaul Kit, Comprehensive, Less Bearings with Flat Head Pistons - Early serial number - Overhaul kit, less bearings (C248 CID gas 4-cylinder engine). Model M and MV to serial number 278049, O6, OS6, W6, to serial number 35463. (For engine with flat head standard compression piston. Verify piston pin diameter of 1-5 16 inch). Kit contains sleeves and sleeve seals. Pistons and piston rings (overbore from 3-7 8 inch to 4 inch), pins and retainers, pin bushings. Complete gasket set with crankshaft seals. Intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS MUST BE ORDERED SEPARATELY. IMPORTANT: Specify Rod and Main bearing sizes, and the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Part No: EOK1151A-LCB)	$614.62

Engine Overhaul Kit, Less Bearings - Overhaul kit, less bearings (C152 CID gas 4-cylinder engine). For tractors with stepped head high compression pistons, valve length 5-5 16 inch. Models: H and HV To serial number 106907, O4, OS4, W4 to serial number 33339. Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings. Complete gasket set with crankshaft seals. Intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS MUST BE ORDERED SEPARATELY. IMPORTANT: Specify rod and main bearing sizes, and the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Part No: EOK1156A-LCB)	$562.16

Engine Overhaul Kit, Less Bearings - Overhaul Kit, Less bearings (C169 and C175 CID Gas 4-cylinder engine). Model 300 serial number 48049 and up with C169 engine and 350 with C175 engine (for engine with stepped head piston, .875 inch piston pin diameter). Contains sleeve and piston kit, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. This engine kit is supplied with 3-5 8 inch Overbore pistons, the Standard Bore was 3-9 16 inch. ENGINE BEARINGS MUST BE ORDERED SEPARATELY. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Part No: EOK1167A-LCB)	$695.00

Valve Overhaul kit - Fits M, MV, O6, OS6, W6. For DISTILLATE. Kit includes valve, valve springs, valve keys, valve guides. Valve length 5.56 inch. (Part No: VOKH248)	$207.69

Valve Overhaul Kit - Fits 460, 606, 2606, 560, 660 (gas 6 cylinder C221, C263). Kit includes valves (intake valve head DIAMETER 1-21 32 inch), Stellite Exhaust Valve, valve springs, valve keys, valve guides. (Part No: VOKH221S)	$298.18

Valve Overhaul kit, C152 Distillate Engine - Fits H, HV, O4, OS4, W4 (4 cylinder C152 DISTILLATE engine). Kit includes valves, valve springs (for non- roto exhaust valve), valve keys, valve guides. Contains: 8- Valve Spring 24544DA, 16 - Valve Keeper 42026D, 8 - Valve Guide 6169DR, 4- Intake Valve 57696D, 4 - Exhaust Valve 57697D. These are 5.0625 inch valve length. (Part No: 187197)	$185.22

Engine Parts

Valve Key - VALVE KEY. For tractor models 238, 2424, 2444, 354, 364, 384, 424, 434, 444, B250, B275, B276, B414. NOTE: 16 halves required for a complete engine. Sold individually. (Part No: 168426)	$2.56

Valve Set, Exhaust - Distillate Engine, Set of 4 - Valve length is 5.56 inch. Set of 4 Exhaust Valves for 248 CID DISTILLATE engine. The number on your exhaust valve should read 57699D. (Part No: 57699D)	$129.02

Valve Set, Intake, Distillate Engine - Set of 4 - Valve length 5.56 inch. For 248 CID DISTILLATE engine. Set of 4 Intake Valves. The number on your intake valve should read 57698D. (Part No: 57698D)	$72.40

Engine Pistons and Sleeves

Sleeve & Piston Kit - Sleeve and Piston Kit. For tractor models (C169 CID and C175 Gas 4-cylinder engines). For tractors with stepped head pistons with .875 inch Piston Pin Diameter. Model 300 To serial number 48048. Complete for 4 cylinders, overbore 3-5 8 inch pistons supplied. NOTE: if your piston pin diameter is 1.109 inch you need to order bushings number 366883R92. (Part No: 184740)	$332.90

Engine Rings

Piston Ring Set - 3-7 16 inch overbore. Complete ring set for 4 pistons. For C152 CID DISTILLATE 4 cylinder engine. Contains 3 compression rings 3 32 and oil ring 3 16 per cylinder. For H and HV to serial number 391357, O4, OS4, W4 to serial number 33339. For H, HV, O4, OS4, W4. (Part No: 184780)	$93.00

Piston Ring Set, 3 Inch Bore - Ring set for 4 pistons. For C113 CID gas 4 cylinder engine. Contains 4 compression at 1 8, 1 oil at 3 16 per cylinder. NOTE THAT YOU MAY ONLY NEED 3 OF THE 4 COMPRESSION RINGS. For tractors: F12, F14, I12, O12, O14, W12, W14. (Part No: 128956)	$133.00

Exhaust System

Exhaust/Intake Manifold - Manifold for the C-123, C-135, C-146, C-153 gas engines in models: 130, 140, 20, 230, 240, 330, 340, 404, 2404, 424, 2424, 444, 2444 (T-4, T-5, T340 & 500 Crawler). Uses threaded exhaust fitting. Replaces part numbers 366305R11, 369645R21, 369645R22, 388584R11, 388584R21. Does not include gaskets set available as part number 352014R1. Does not include short exhaust pipe available as part number R0056P. 2-3 8 inch center-to-center carburetor mounting holes, 1-3 16" outside diameter exhaust ports at cylinder head. MAY OR MAY NOT COME PAINTED PER PICTURE. (Part No: 101550)	$145.00

Exhaust Manifold, Vertical - For tractor models B275, 354, 384, B414, 444, 2300, 2444 all with diesel engines. Gasket available as p n 704165R2. Replaces 3042719R11, 3045354R11. NOTE - THIS MAY BE SLIGHTLY DIFFERENT THAN YOUR ORIGINAL MANIFOLD AND YOUR HEAT SHIELD MAY NEED TO BE TRIMMED AS THIS CASTING MAY BE SLIGHTLY LARGER. (Part No: 113663)	$52.00

Muffler - For Cub. Muffler A: 2 3 4 Inch INLET LENGTH B: 1 3 8 Inch INLET INSIDE DIAMETER C: 12 1 2 Inch SHELL LENGTH D: 6 3 4 Inch OUTLET LENGTH E: 1 1 2 Inch OUTLET OUTSIDE DIAMETER F: 22 Inch OVERALL LENGTH. Vertical. Has round body (3 1 4 inch shell diameter). (Part No: 100798)	$35.00

Fuel System / Air Intake

Carburetor Fuel Line Fitting With Strainer - Fits INTERNATIONAL carburetors: 356948R92, 35865R91, 366066R91, 367258R92, 367259R92, 372723R92, 378196R94, 379813R91, 380956R91, 381984R91, 388297R92, 388424R92, 388425R96, 390082R92, 396197R93, 45108DB, 45108DC, 50981DA, 50981DB, 50983DB, 52714D, 52814DA, 52815D, 52815DA, 533622R91, 53873DF, 53873DH, 539575R91, 56543DE, 60329DA. 1 4 inch pipe to 5 16 inch flare. (Part No: 111514)	$17.99

Fuel Filter, CAV type - Fuel filter for tractor models 2300, 2400, 2424, 2444, 248, 2500, 2500A, 258, 268, 3414, 3514, B414, 1294, 1394, 1494, 1594, 2350, 276, 278, 354, 364, 384, 385, 424, 433, 434, 444, 454, 484, 485, 533, 574, 584, 585, 633, 644, 674, 684, 685, 733, 744, 784, 785, 833, 844, 884, 885, 201. Replaces: 1502155C91, 1966515C1, 3044506R93, 3144477R92, 796051R91, P143287. NOTE: verify you have CAV type filter before ordering. Filter measures 3 7 16 inches outside diameter and 2 3 4 inch tall. (Part No: 158868)	$8.49

Fuel Pump Overhaul Kit - For early models with the diaphram attached onto the shaft with a nut. For tractor models F12, F14, I9, I12, O12, O14, W9, W12, W14. NOT FOR USE WITH METHANOL BLENDED GAS***THIS IS FOR THE ORIGINAL O.E.M. PUMP (PART # 24527D) AND THE EARLY AC PUMP. BOTH FEATURED A HAIR SPRING CHECK VALVE; ALSO THE DIAPHRAM IS ATTACHED TO THE SHAFT WITH A NUT. CAN BE USED FOR THE LATE AC REPLACEMENT PUMP, HOWEVER THE CAGED CHECK VALVE, WHICH IS INCLUDED IN IHS164, MUST BE REUSED; ALSO THE SHAFT MUST BE GROUND TO REMOVE THE OLD DIAPHRAM, AND PEENED OVER AFTER THE NEW DIAPHRAM IS ATTACHED. CONTAINS: DIAPHRAM, MOUNTING GASKETS, FUEL BOWL SCREEN AND GASKET, PIVOT SHAFT, PLUNGER, SPRINGS, RETAINERS, PACKINGS. (Part No: 178664)	$80.00

Sediment Bowl Assembly, Dual Tank - For tractors using two tanks. 3 8 inch pipe inlet, 5 16 inch compression outlets x 2. For tractor models A, B, BN, C, I4, I6, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, (H, HV serial number 50866 and up), (M serial number 24215 and up), (MV serial number 24215 and up), (O4, W4 serial number 1130 and up), (O6 serial number 1317 and up), (W6 serial number 1317 and up) with Distillate or All Fuel. Replaces 370831R91, 51495DD, 58361DAX, IHS713. YOU MAY NEED A 90 DEGREE ELBOW - NOT SUPPLIED BY YESTERDAYS TRACTOR. (Part No: 113653)	$84.00

Gauges

Tachometer - his Tachometer fits Gas and LP Tractors: 400, 450 (Farmall Rowcrop: 300, 350 will work for GAS, LP and Diesel, but not exactly like the original. The RPM will read correctly, The PTO and ground speed is in a different location), Wheatland: 400 W400, 450, W450. NOTE; This is an aftermarket replacement gauge. The mounting studs on the back of this gauge are 2-5 8 inches center to center. It will not fit the 2-3 4 inch spacing of the original bracket without modifying the bracket. For a Tachometer that does not require this modification to your bracket, order 364393R91-OE (Part No: 121705)	$67.00

Tachometer - For tractor models: 400, 450, W400, W450 all with diesel engines. NOTE; This is an aftermarket replacement gauge. The mounting studs on the back of this gauge are 2-5 8 inches center to center. It will not fit the 2-3 4 inch spacing of the original bracket without modifying the bracket. For a Tachometer that does not require this modification to your bracket, order 364395R91-OE (Part No: 121704)	$57.00

Water Temperature Gauge with IH Logo - TEMPERATURE GAUGE WITH 19 inch LEAD & IH Logo. FITS MODELS A, H, M, Super A, Super M, Super MTA (300, 350 UTILITY). Fitting may require the OEM Adapter 51510D which we do not have available. (Part No: 111254)	$41.76

Hitch / Drawbar

Top Link Center - NOTE: This item will not work with standard duty OEM components on models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588 and 6788. Full assembly 1331854C2 must be used for these applications because of the larger 1.500 inch thread size. This part is compatible with original equipment on models 7110 through 8950. This part replaces 1954221C1, 1954221C2 (Part No: 170260)	$152.30

Top Link End, Front RH Threads - NOTE: This item will not work with standard duty OEM components on models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588 and 6788. Full assembly 1331854C2 must be used for these applications because of the larger 1.500 inch thread size. This part is compatible with original equipment on models 7110 through 8950. (Part No: 118323)	$172.90

Top Link End, Rear LH Threads - NOTE: This item will not work with standard duty OEM components on models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588 and 6788. Full assembly 1331854C2 must be used for these applications because of the larger 1.500 inch thread size. This part is compatible with original equipment on models 7110 through 8950. (Part No: 118322)	$185.00

Hydraulic System

FILTER ELEMENT - 25 Micron replacement element for SF1-25. (Part No: 182541)	$11.97

FILTER ELEMENT - 10 Micron replacement element for SF1-10. (Part No: 120092)	$9.69

Lights

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5 inches in diameter. Price is for one headlamp assembly. Does not include mounting bracket. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W4, Super W6, Super A, W4, W6, W9, WD6, WD9. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 112415)	$40.26

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 112415)	$40.26

Switch, Light - Fits Cub (serial number 224401 >, Cub Lo-Boy (serial number 18701 >), Cub 154 Lo-Boy, Cub 185 Lo-Boy, 140 (serial number 26801 to 57723, with GENERATOR, 140 (serial number 57724 >, with ALTERNATOR), 184, 354, 4100, 4156, 444, 454, 464 (serial number < 109150), 574 (serial number < 114908), 674 (serial number < 108104), 2300, 2444, 2500 (serial number < 114908).376851R92 (Part No: 125705)	$32.76

Oil System

Spin On Oil Filter Adapter - This Spin on Oil Filter Adapter Kit is for BD144 and BD154 Diesel engines. It is used on B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. Replaces 3066851R91, 3042420R91, FILTERKIT01. Uses replacement filter E7NN6714AA. (Part No: 176310)	$45.60

Paint

Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100722)	$36.70

PTO / Driveline

PTO Seal - Measures 1.306 inch inside diameter, 2.220 inch outside diameter. THIS SEAL IS .312 InchES WIDE. VERIFY THE WIDTH OF YOUR OLD SEAL. YOU NEED TO INSTALL 2 OF THESE IF YOUR OLD SEAL IS WIDER. For tractor models Super A, H after serial number 118000, (M, MD, Super M, Super MTA and Super MD after serial number 59957), Late W4, W6, W9, Super W4, Super W6, Super W9, B250, B275, B414; Also fits the following models with transmission driven PTO (not Live PTO): MTA, 300, 330, 350, 354, 364, 384, 400, 424, 434, 444, 450, 454, 544, 600, 650, 2300, 3414, 3514, 3616. Replaces 3065217R91, 358772R91, 358812R91, 50702D, 372394R91, S90957, 708107R91. (Part No: 114730)	$9.40

PTO Shaft Seal Kit - For tractor models 454, 464, 484, 574, 584, 674, 684. BEARING AND SEAL KIT FITS: 71230 IPTO SHAFT; FRONT SEAL DIAMETER 1.750 inch; REAR SEAL DIAMETER 1.625 inch. KIT INCLUDES: RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, IPTO SEAL AND REAR SEAL. (Part No: 179493)	$78.00

Seats

Pan Seat Flip over with lock Rod - RED AND WHITE Vinyl Pan Seat, flip over seat with lock rod. Like Original Seat, complete with lock. A, AV, B, BN, Super A, Super AV, 100, 130, 140 (Early), [ International Utility: 300, 350 (with LOW-STYLE SEAT) ], Utility: 460 (with LOW-STYLE SEAT); Replaces: 354157R92, 50570DC (Part No: 101250)	$192.00

Pan Seat with Slide on Seat Bottom - RED AND WHITE Vinyl Pan Seat with flip over seat with slotted slide on seat bottom. For Early Models H, M. (Part No: 182879)	$310.00

Seat Custom with Fold Up Arms - Black vinyl assy. with fold up arm rests fits, 1030, 1031, 1032, 1070, 1175, 1190, 1200TK, 1290, 1390, 1470TK, 200, 230, 240, 2504, 300, 330, 340, 350, 400, 404, 450, 460, 480B, 503, 504, 560, 580B, 600, 606, 650, 660, 730, 740, 830, 840, 870, 930, 940. MUST USE ADAPTER FOR FOLLOWING MODELS, A, B, C, H, HV, M, MDV, MD, MV, Super H, Super A, Super M, W9, WD9, WDR9, WR9S. (USE ADAPTER # CSA300). (Part No: 101387)	$103.00

Seat Mounting Bracket - ADAPTER PLATE, FOR MOUNTING TISCO BRAND TS SERIES ADJUSTABLE BASE SUSPENSION SEATS ON INTERNATIONAL TRACTORS: HYDRO 84, 454, 464, 574, 674, 584, 684, 784. For 454, 464, 484, 574, 584, 674, 684, 784, HYDRO 84 (Part No: TS424SB)	$43.19

Seat, Universal - Seat assembly, black leatherette upholstery, dimensions: 18-3 4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward rear adjustment (slide track 9 inches wide x 11-1 4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before purchasing. Weight 33 pounds. (Part No: 183989)	$186.10

Seat, Universal - Seat assembly, blue leatherette upholstery, dimensions: 18-3 4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward rear adjustment (slide track 9 inches wide x 11-1 4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: 180782)	$86.00

Seat, Universal - Seat assembly, yellow leatherette upholstery, dimensions: 18-3 4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward rear adjustment (slide track 9 inches wide x 11-1 4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: 180783)	$86.00

Sheet Metal / Body Parts

Fender, LH - For tractor models Super A, 100, 130, 140. THERE IS AN ADDIONAL $10 SHIPPING CHARGE DUE TO SIZE WEIGHT ON THIS ITEM This additional shipping charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126550)	$208.00

Fender, RH - For tractor models Super A, 100, 130, 140. THERE IS AN ADDIONAL $10 SHIPPING CHARGE DUE TO SIZE WEIGHT ON THIS ITEM* This additional shipping charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126637)	$208.00

Rear Cab Glass - For tractor models Hydro 186, 786, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788. THIS IS A SPECIAL HANDLING ITEM REQUIRING TRUCH FREIGHT. ADDITIONAL SHIPPING CHARGE OF $150 WILL BE ADDED TO YOUR ORDER.* This additional charge will be added to your order. (Part No: 108545)	$119.00

Steering

Heavy Duty Front Axle Complete with Hubs - REPLACES: HDUH4000 NOTE: HDUH models include 6 bolt hubs with 6 inch bolt circle and 4.62 inch pilot diameter hole, bearings and seals are also included. Fits on models: 400, 450, M, MTA, Super M. (Part No: 119998)	$3375.00

Spindle, LH - Fits Tractor Models: 400, 450 with OEM WIDE FRONT, M LATE, MTA, Super M. (Part No: 104341)	$237.00

Spindle-RH - Fits Tractor Models 400, 450 with OEM WIDE FRONT, M LATE, MTA, Super M. (Part No: 104342)	$236.00

Steering Arm - STEERING ARM, left hand splined. For 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 756, 766, 786, 856, 886, 966, 986, HYDRO 100. (Part No: 100888)	$44.26

Steering Wheel - 16 inch diameter. Mounts on 13 16 inch (36 spline) shaft. For the following tractors WITH POWER STEERING : HYDRO 70, HYDRO 84, HYDRO 86, HYDRO 100, HYDRO 186, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 4386, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788. Replaces IHS542. Cap is available separately as part number 68837C3. (Part No: 101432)	$37.00

Tie Rod Assembly - Using this tie rod assembly for the models listed will take modification, but it is the only one available for factory original row crop models: H, M, MD, MTA, Super H, Super M, Super MD, Sure MTA, 300, 350, 400, 450. This tie rod assembly tapered ball stud measures 0.675 inch to 0.762 inch at the widest point of the taper shaft, with 5 8-18 thread. The tie rod is adjustable to a maximum of 34-1 4 inches and a minimum of 20-7 8 inches. Fits factory INTERNATIONAL wide front axles only (with tierods behind the center axle.) Will NOT fit Swartz, Norden, Speeco, or other aftermarket wide front axles. To make this assembly work for these applications, the center tube must be shortened about an inch. We do not have instructions for doing this modification. This part can not be returned if you make modifications to the tube. Contains the following items: 359984R93 Tie Rod- Outer, 359986R1 Clamp, 374062R1 Jam Nut, 383917R1 Tube, 384006R92 Tie Rod- Inner. (Part No: 100869)	$75.30

Tie Rod Tube - 16.062 inch length, .875 inch outside diameter. Tie Rod tube for 100, 130, 140, (A1, AV, AV1, Super A - AFTER serial number 318310.) (Part No: 104363)	$59.00

Tools

Grease Gun PowerLuber 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)	$134.19

Wheels

Front Wheel Hub-6 Bolt - NOTE : This hub allows changing old style IH narrow front cast whl & hub to a standard 6 bolt. Hub uses standard wheel bearings & seals. Fits tractor models 400, M, and Super M. (Part No: 104501)	$146.00

Rear Wheel Clamp - This rear wheel clamp is for 2 1 2 inch diameter axles. NOT FOR STEEL WHEEL OR CUT DOWN WHEEL APPLICATIONS. Fits cast wheel center part number 6194D. It is for tractor models H, HV, Super H, Super HV, 300 early, for all 6194D rear wheel. (Part No: 111698)	$72.50

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy