|
Ford 9N, 2N and 8N Discussion Board |
Re: Re: Re: Re: Re: Front axle bushing, pin, spacer and shims
[ View Follow Ups ] [ Post Followup ] [ Return to Ford 9N, 2N and 8N Discussion Board ]
Posted by bg on November 16, 1999 at 14:59:03 from (207.42.55.95):
In Reply to: Re: Re: Re: Re: Front axle bushing, pin, spacer and shims posted by Elvy on November 16, 1999 at 11:15:53:
I have my axle off and apart right now. Drove the bushing out. Mine didn't have the big washers, only the spacer. Don B sent me two washers, and as soon as I can find the bushing I bought last spring, I'll see if the two washers will tighten up the gap between the axle and axle mount. I may have to use more than two to take the slop out. My axle mount appears to be bent, but it's so asymmetrical that it's hard to tell without a good one to compare to.
Follow Ups:
Post a Followup
|