Re: gear shift pattern

Posted by Dell (WA) on January 22, 2006 at 10:08:09 from (172.195.177.15):

In Reply to: gear shift pattern posted by gearhead on January 22, 2006 at 08:12:10:

gearhead.........crazy8 had it right. 4-speed tranny shift pattern is cast-in to top of tranny housing. Go look.

The dealer installed "Sherman" aux tranny (iff'n installed) is mounted INSIDE the clutch housing with the shifter lever over yer left-toe. Foward for slow, back for faster. Works in all 4-tranny gears.

BTW, unlike automobile trannys, the tractor tranny is NOT meant to be shifted while moving. Pick the gear you need and slip yer clutch to get moving, add more hand-throttle iff'n it wants to die on you.

You write......."The 3 point wont raise but the oil looks like it might have a lot of water in in from sitting.".........you MUST have the PTO lever behind yer left-heel operating for the hydraulic pump to pump to raise the 3-point lift. Amazing, eh?

Suspect water in hydro-tranny oil? DON'T MUCKA'ROUND, replace it because the water will sink into the lowest part of yer hydraulics and FREEZE (and break) yer $$$ hydro-pump housing where you can't see it.

And REPLACE yer tranny shifter boot. ($10, cheap) TIP: boil yer new tranny boot so it is nice and soft and flexable so it fits into the grooves of the tranny shifter tower. Simple, eh?..........respectfully, Dell

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]