Funny bolt in Lift valve actuator .....

Posted by Truck on September 22, 2000 at 11:22:11 from (172.163.244.140):

Took my 8N lift apart to freshen up the seals and piston, and discovered a strange bolt installed through the long rod that goes down to the pump..
My manuals aren't too clear on this part of the tractor. I don't think it is supposed to be there but I'm not sure what is...It is installed with the head towards the lift handle, and the threads are hitting on the lift piston . Looks to be an 8MM bolt, about 2 inches long. Is it replacing a pin or was it supposed to hold a spring? It is NOT the famous position control pin, that is there and about 1/3 worn off. The lift did work before it was taken apart except it leaked down pretty bad, and I've already found the scored rings and cylinder that caused that.
Does anyone have a picture of a properly assembled cover with all the parts ? Thanks!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Funny bolt in Lift valve actuator ..... Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]