Idle Adjustment Needle on 9n

Posted by Brian in Indy on September 06, 2001 at 06:42:38 from (206.53.226.4):

Question to all: in the tune-up specs of whatever manual you read or who ever you care to listen to says to seat the idle adjustment needle, then turn counter-clockwise 1 to 1 1/2 turns. Start the engine and run to normal operating temperatures. Return engine to idle. Turn idle adj needle clockwise until engine starts to falter, then turn back out until engine runs smoothly. In trying this, I can reseat the idle needle, and the engine still does not falter in any way. Is this a sign of a problem?

Follow Ups:

• Re: Idle Adjustment Needle on 9n ZANE 05:20:01 09/07/01 (0)
• Re: Idle Adjustment Needle on 9n R.M. In Al. 20:04:58 09/06/01 (0)
• Re: Idle Adjustment Needle on 9n Bob (KY) 11:22:19 09/06/01 (0)
• Re: Idle Adjustment Needle on 9n David(KY) 11:08:30 09/06/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Idle Adjustment Needle on 9n Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]