Posted by SDMike on August 02, 2022 at 12:02:56 from (64.251.160.49):
In Reply to: Farmall Pedal Tractor posted by Jerome Henehan on August 01, 2022 at 13:07:07:
Jerome, if you would like, send me a picture or post a picture of your pedal tractor. You will need to know what model you have when ordering parts/decals. 1)evaluate what parts are good and what parts need replacing. Make a list. 2)remove the bolts that hold it together. 3)strip all the old paint, we use zip-strip, sand blasting YOU MUST BE CAREFUL as you could blow through the cast aluminum in some areas. 4)prime and paint. we prefer to use actual JD, IH, Case, Oliver etc. paint as opposed to a generic like van sickle. 5)re-assemble and apply decals We get our parts from Dakotah Toys in Madison SD, but there are other vendors out there as well. Our kids have restored pedal tractors as 4H projects for the last 10 years. They really liked to show off the before and after pics. Let me know if you have any further questions and good luck! Mike
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Lifetime of Farm Machinery - by Joe Michaels. I am a mechanical engineer by profession, specializing in powerplant work. I worked as a machinist and engine erector, with time spent overseas. I have always had a love for machinery, and an appreciation for farming and farm machinery. I was born and raised in Brooklyn, New York. Not a place one would associate with farms or farm machinery. I credit my parents for instilling a lot of good values, a respect for learning, a knowledge of various skills and a little knowledge of farming in me, amo
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
