Re: Re: position control...chains??

Posted by Paul (FLA) on June 23, 2004 at 14:02:01 from (65.126.9.110):

In Reply to: Re: position control...chains?? posted by Steve_ne on June 23, 2004 at 07:14:29:

I use height limiter chains, but there is a limit (no pun) to the height it will hold up the implement. Maybe I am using them wrong.
I put the slotted metal piece near the large spring, and I run the chain to the pins of the implement (bottom of 3 pt). I raise the implement as high as possible, and I take up as much slack on the chain. (using slotted piece) The implement will still go down to the ground, when I release the height lever.
It seems like the chain would limit more, if it were attached to the 3 pt arms closer to the tractor, instead of the pins on the implement. Does this make sense?

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: position control...chains?? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]