Re: Questions Concerning 48 Farmall Cub? HELP!

Posted by Bama Binder on January 18, 2001 at 13:05:21 from (206.5.110.200):

In Reply to: Questions Concerning 48 Farmall Cub? HELP! posted by Shawn B on January 18, 2001 at 12:40:06:

There were few differences from 1948-1954. One of them was that they changed the governor setting from 1600 RPM on earlier machines to 1800 RPM on later machines. The RPMs are stamped on the mfg tag on the right side of the fron casting.

The 48s could be had with or without hydraulics. Tractors with the manual lift typically fetch $500 or so less depending on location. Any other difference are somewhat insignificant

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Questions Concerning 48 Farmall Cub? HELP! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]