Re: H won't run

Posted by mike the tech on January 14, 2001 at 19:37:35 from (208.3.0.224):

In Reply to: H won't run posted by Dead H on January 13, 2001 at 14:53:19:

Dead H Do you have a magneto or distributer on the engine? If it is a mag, you do not want to supply any voltage to the terminal on the side of the case. That terminal is used to ground the mag to turn the engine off. Wire from mag terminal to a switch, then wire from switch to chassis. I thought I read on your complaint that the engine backfired, so timing could be part of your problem. If you have a mag, you will find a pair of small gears under a cover under the rotor held with screws. These gears are made from a fiberous material that will wear out and are replaceable. Timing procedure required here.email me

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: H won't run Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]